CNC Mastercam Programming Machinist - 1st shift pay to $40 hourly

$40 per hour

MRINetwork

CNC Mastercam Programming Machinist (First Shift)

Two years or more years of experience programming Mastercam from scratch as well as two years or more years of experience operating CNC Machines

Flexible start times ranging from 5 am to 9 am and then working eight to nine hours per day, Monday through Friday

Pay is up to $40 hourly

Must be a United States citizen or Green Card holder

No remote

Full-time

Permanent W-2 employee

Full benefits

No relocation

Brookfield, Wisconsin area

This stable, growing, established, high-precision manufacturer is looking to hire a full time, permanent CNC Mastercam Programming Machinist. This smaller manufacturer is growing and has a backlog that is over a year long. Employees are treated very well and have flexible start times. The working environment is clean and temperature controlled so employees are comfortable. Employees are valued and have input in the business. Mastercam is utilized for programming vertical mills, horizontal mills, turning centers and lathes to machine steel, aluminum and titanium. The company recently purchased a five-axis machine.

MRINetwork

Apply

Vacancy posted 3 days ago

Similar jobs that could be interesting for youBased on the CNC Mastercam Programming Machinist - 1st shift pay to $40 hourly in Brookfield, WI vacancy

Manual Lathe Milling Machine Operator Machinist - Pay is up to $29 hourly
$29 per hour
...Manual Lathe Milling Machine Operator Machinist on 1st Shift Must have one or more years of machinist or CNC operator experience to be considered Pay is up to $29 per hour First shift Must be a United States citizen or Green Card holder No remote Full...
Hourly pay
Day shift
CNC
Permanent employment
Full time
Summer work
Remote work
Relocation
Flexible hours
MRINetwork
Milwaukee, WI
4 days ago
CNC Machinist 1st Shift and 2nd Shift
$23 - $24.5 per hour
...CNC Machinist Stable and growing CNC job shop is looking to hire CNC... ...Programmer. The company runs 10-hour shifts on 1st and 2nd shift, and overtime is available. Pay rates vary by skill level:... ...specification Knowledge of programming and may have ability to make...
Day shift
CNC
Shift work
Afternoon shift
Institech
Brookfield, WI
1 day ago
Manual Vertical Turret Lathe Horizontal Mill Machinist Pay $16-$40
$16 - $40 per hour
...Vertical Turret Lathe and Horizontal Boring Mill Machinist Must have one or more years of manual X,... ...interpreting engineering drawings. Work hours are from 6:00 am to 4:30 pm Monday through Thursday. Pay is $16 per hour to $40 per hour (depending on experience) plus...
Hourly pay
Permanent employment
Full time
Remote work
Relocation
Monday to Thursday
MRINetwork
Butler, WI
4 days ago
Machinist / Toolroom CNC - First Shift
$25 - $30 per hour
CNC Machinist - Tool Room (1st Shift)Love Aerospace? Looking for a Machine Shop That Has a Great Culture?At Reich... ...What You'll Do Program, set up, and operate CNC equipment... ...team and build something meaningful.Pay Rate: $25 - $30 per hourHours: 1st Shift...
Day shift
CNC
Contract work
Summer work
Monday to Friday
MRA - The Management Association
Menomonee Falls, WI
4 days ago
CNC Machinist II - 1st Shift
$31 - $33 per hour
...Manufacturing Manager, the Machinist is responsible for... ...of the program language to identify... ...Assemble and operate CNC machines, including... ...continuity among work shifts by documenting and communicating... ...is preferred Pay Details: $31.00 to $33.00 per hour Equal Opportunity...
Hourly pay
Day shift
CNC
Local area
Immediate start
Shift work
Adecco
New Berlin, WI
10 days ago
CNC Machinist / Machinist Senior
$28 - $37 per hour
...CNC Machinist - 1st Shift $28 to $37 an hour + Overtime (Typical earnings $80k-$100k) + Training + Progression to... ...consistent overtime, strong hourly pay, and long-term stability in a... ...equipment, and long-term development into programming or leadership. Now is a great...
Hourly pay
Day shift
CNC
Rise Technical Recruitment
Milwaukee, WI
20 hours ago
Mill Machinist- Hurco- 1st Shift
...engineering drawings, GD&T, fixturing techniques, and basic G/M code programming. Key Responsibilities: Read and interpret... ...solid grasp of GD&T. Operate vertical and horizontal (Hurco) CNC mills; change and manage tooling. Use non-programmable measuring...
Day shift
CNC
iBehm Consulting
Milwaukee, WI
4 days ago
CNC Machinist
..., Inc. is seeking skilled CNC Machinists to join our team, at our facility... ...operations. # Enter program commands within machine... ...Required: # Experience with Mastercam programming and editing.... ...Job Type: # Full time – 1st & 2nd Shift # Hourly – Non-Exempt...
Hourly pay
Day shift
CNC
Full time
Temporary work
Afternoon shift
Toolcraft Machining
Germantown, WI
2 days ago
CNC Programmer & Milling Specialist - 1st Shift
$25.7 - $35.7 per hour
...looking for an experienced CNC/NC Milling Machine Operator/Programmer for 1st Shift. Candidates should possess... ...experience and be proficient in programming on Fanuc and Mori Seiki... ...fixtures. The job offers a pay range of $25.70 - $35.70 per hour and requires a strong understanding...
Hourly pay
Day shift
CNC
The Kinetic Co.
Greendale, WI
4 days ago
CNC Lathe Machinist
$22 - $37 per hour
...We are currently in search of a 1st or 2nd shift CNC LATHE machinist/programmer. Position Requirements: 2+ years of CNC programming: This encompasses doing initial setups... ...-time LONG TERM EMPLOYMENT Pay: $22.00 - $37.00 per hour, NEGOTIABLE Benefits:...
Hourly pay
Day shift
CNC
Full time
Monday to Friday
Flexible hours
Shift work
Afternoon shift
Regent Die & Tool Co.
Milwaukee, WI
4 days ago
Prototype Machinist B
...Prototype Machinist B INNOVATE without boundaries! At Milwaukee... ...up and operate manual and/or CNC machine tools such as profile... ...related field. ~ Basic CNC programming G&M code. ~ Experience with... ...~ Knowledge of Solid Works, Mastercam, Tool Studio, Vector Cam or equivalent...
CNC
Work at office
Milwaukee Tool
Brookfield, WI
20 hours ago
CNC Programmer Machinist
$26 - $34 per hour
...Join a Premier CNC Machining... ...CNC Programmer Machinists to its growing... ...openings on both 1st and 2nd shift , this is... ...everything from basic programming and setup to... ...programming (Mastercam preferred) and... ...~1st Shift: Hours are typically... ...Pay & Benefits:...
Day shift
CNC
Flexible hours
Shift work
Afternoon shift
Staffpros
Milwaukee, WI
8 days ago
Machinist III
...Machinist Standex International is a global... ...control standards. Shift Schedule: 2:30PM-11... ...of the program language to identify... ...Assemble and operate CNC machines, including... ...time, multi-task, and pay close attention to... ...and bend for various hours throughout the day...
CNC
Local area
Immediate start
Worldwide
Shift work
Standex
New Berlin, WI
4 days ago
Applications Engineer - Menomonee Falls, WI
$28.85 - $40.87 per hour
...Salary Range $28.85 - $40.87 Hourly Description... ...distributor of quality CNC manufacturing machinery... ...strong CNC machining, programming, tooling, work holding... ...experience required; Mastercam experience preferred.... ...0) The actual base pay for the position may be...
Hourly pay
CNC
Temporary work
Work at office
Yamazen
Menomonee Falls, WI
20 hours ago
Machinist
Metal fabricating job shop in Wauwatosa has a 1st shift position for a Machinist experienced in a variety of skills. The ideal candidate would have experience in both manual and CNC mills and lathes. Manual boring bar experience would also be a plus. Candidate should have...
Day shift
CNC
Reardon Metal Fabricating Inc
Wauwatosa, WI
4 days ago
1st shift - CNC Operator/Programmer
$25.7 - $35.7 per hour
...are seeking an experienced CNC/NC Milling Machine Operator/Programmer for 1st Shift. What’s in the job Set up and... ...assist in developing practical programming for new and unusual... ...status. Job Type: Full-time Pay: $25.70 - $35.70 per hour #J-18808-Ljbffr The Kinetic...
Hourly pay
Day shift
CNC
Full time
The Kinetic Co.
Greendale, WI
4 days ago
CNC Department Lead - 1st shift
$80k - $150k
...Description Job Title: CNC Department Lead Shift: 1st Shift Location: Milwaukee... ...offering competitive pay and a collaborative work environment... ...Lead, you will not only program and run machines but also... ..., Milltronics) using both MasterCAM and on-machine programming...
Day shift
CNC
Shift work
SITE Staffing
Milwaukee, WI
20 hours ago
Machinist Fabricator
$43.95 per hour
...req ID:15714 Title:Machinist Fabricator Job... ...Part-Time:Full Time Shift: All shifts Pay Rate: $43.95 At Harley... ...and 3-D models using CNC mill, CNC Lathe,... ...engineering tolerances. Program, load and operate HP... ...for all full-time hourly employees including,...
Hourly pay
CNC
Full time
Part time
Apprenticeship
Immediate start
Relocation
Relocation package
All shifts
Shift work
Harley-Davidson
Wauwatosa, WI
1 day ago
Machinist II
...Machinist II Standex International is a global... ...standards. Shift: 7:00AM-3:30PM; Monday... ...understanding of the program language to... ...Assemble and operate CNC machines, including... ...time, multi-task, and pay close attention to... ...and bend for various hours throughout the day...
CNC
Local area
Immediate start
Monday to Friday
Shift work
Standex
New Berlin, WI
4 days ago
CNC Maintenance Tech - 1st and 2nd shift Available
$35 per hour
...Job Description Job Title: CNC Maintenance Technician - 1st Shift $1,500 Sign-On Bonus! Competitive Pay: $35++/Hour Ready to elevate your career in a cutting-edge manufacturing environment? Join our team and be a vital part of our commitment to innovation...
Hourly pay
Day shift
CNC
Temporary work
Relocation package
Afternoon shift
OptiHire HR
New Berlin, WI
1 day ago
CNC Horizontal Boring Milling Machinist - Pay to $38 hourly
$38 per hour
...CNC Horizontal Boring Milling Machinist Work hours are from 6:00 am to 4:30 pm Monday through Thursday. Pay up to $38 per hour plus possible overtime on Fridays. Must be a United States citizen or Green Card holder. No remote. Full-time permanent W-2 employee. Full...
Hourly pay
CNC
Permanent employment
Full time
Remote work
Monday to Thursday
MRINetwork
Butler, WI
4 days ago
CNC Machinist (1st Shift)
...STS Technical Services is hiring CNC Machinists for 1st Shift in Brookfield, Wisconsin. If you can set up, program, and run complex parts without babysitting the machine... ...site Fitness Center & Medical Clinic ~ Weekly Pay ~ Company Provided Uniforms and Safety Shoe...
Day shift
CNC
Weekly pay
Permanent employment
Contract work
Temporary work
Relocation package
STS Technical Services
Brookfield, WI
4 days ago
Youth Apprentice - Tool & Die Shop
$18 - $20 per hour
...best practices Operate CNC and manual lathes, mills,... ...all Youth Apprentice State Program Guidelines Diversity of... ...& Die shop Environment ~1st or 2nd shift Opportunities The anticipated pay range for this position is $18 - 20 hourly. The actual base pay offered...
Hourly pay
Day shift
CNC
Apprenticeship
Local area
Afternoon shift
Brunswick
Brookfield, WI
20 hours ago
CNC Machinist - 1st Shift
...CNC Machinist Precision. Power. Possibility. Are you... ...confident in CAM systems like Mastercam, this is your... ...an impact. Join our 1st shift team and bring your skills... ...the floor: Set up, program, and operate Haas... ...weekends are yours Pay: Competitive, based on...
Day shift
CNC
Monday to Friday
Shift work
Weekend work
Afternoon shift
In-Place Machining Company
Milwaukee, WI
22 days ago
Multi‑Axis CNC Programmer/Setup Specialist
...with modern equipment, you’ll program, set up, and run multi-axis mills... ...What you’ll handle Program CNC equipment and perform on-the-... ...-time in Brookfield, WI ~1st Shift: 5:00am–3:30pm, Mon–Fri ~2nd... ...and medical clinic ~ Weekly pay ~ Company-provided uniforms...
Day shift
CNC
Weekly pay
Full time
Relocation package
Afternoon shift
Trace-A-Matic
Brookfield, WI
9 days ago
Toolmaker - 1st shift
Toolmaker - 1st Shift We are a privately‑held independent metal fabrication company... ...room experience. SolidWorks and/or MasterCAM experience. CNC programming experience. One or more years of... ...Second Shift Premium In addition to base pay, we also offer excellent benefits,...
Day shift
CNC
Temporary work
Relocation package
Flexible hours
Afternoon shift
Wisconsin Stamping and Manufacturing
Germantown, WI
2 days ago
2nd Shift Working Supervisor (Machining)
...Are you a veteran machinist who's ready to step... ...looking for a 2nd Shift Working Supervisor... ...'ll lead a team of CNC and Manual Machinists... ...Grind: Work 10 1/2 -hour shifts Monday... ...Coordinate with the 1st shift supervisor to... ...Competitive Hourly pay + Shift Differential...
Hourly pay
Day shift
CNC
Part time
Work at office
Monday to Thursday
Shift work
Night shift
Afternoon shift
Krueger Bearings Inc
Menomonee Falls, WI
2 days ago
CNC Programmers - Manufacturing
$25 - $30 per hour
...Description Position Title: CNC Machinist Wage: $25.00 - $30.00/hour Shift: 1st Hours: 11:00am - 7:00pm Are... ...maintenance and housekeeping - Edit CNC programs as required - Work... ...seekers! We will never ask you to pay a fee. Please note that...
Hourly pay
Day shift
CNC
Immediate start
Shift work
QPS Employment Group
New Berlin, WI
1 day ago
HIRING URGENTLY - 1st & 2nd Shift Manufacturing Opportunities
$18 - $25 per hour
...! Open Positions: • Machine Operator • CNC Operator • Brake Press Operator • Die Casting Operator • Production Associate Shift Availability: ✅ 1st Shift ✅ 2nd Shift Pay Range: $18.00 – $25.00 per hour (based on experience) What We’re Looking For...
Hourly pay
Day shift
CNC
Immediate start
Shift work
Afternoon shift
WFA Staffing Group
Milwaukee, WI
8 days ago
2nd Shift Working Supervisor (Machining)
...Are you a veteran machinist who’s ready to step... ...looking for a 2nd Shift Working Supervisor... ...time on the machines (CNC Lathes, CNC Mills,... ...Grind: Work 10 1/2‑hour shifts Monday through... ...with the 1st shift supervisor to... ...Competitive Hourly pay + Shift Differential...
Hourly pay
Day shift
CNC
Part time
Monday to Thursday
Shift work
Night shift
Afternoon shift
Krueger Bearings, Inc
Menomonee Falls, WI
1 day ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Mastercam Programming Machinist - 1st shift pay to $40 hourly. Be the first to apply!