Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Repair and Tool Technician

Home Depot

Repair and Tool Technician | Home DepotPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.Applications are accepted on an ongoing basis

Vacancy posted 21 hours ago
Similar jobs that could be interesting for youBased on the Repair and Tool Technician in Brighton, CO vacancy
  •  ...Repair and Tool Technician | Home DepotRepair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained... 
    Suggested

    Home Depot

    Firestone, CO
    1 day ago
  • $22 per hour

     ...Repair And Tool Technician | Home DepotPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that... 
    Suggested

    Home Depot

    Thornton, CO
    1 day ago
  • Job DescriptionPosition Purpose:Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units
    Suggested

    Home Depot

    Broomfield, CO
    21 hours ago
  • $30 - $40 per hour

     ...produce precision parts according to engineering drawings and specifications. Daily responsibilities include selecting appropriate tooling, performing machine adjustments, loading and unloading materials, and inspecting parts throughout the production process to ensure... 
    Suggested
    Hourly pay
    Full time
    Apprenticeship

    G&A Recruiting Partners

    Brighton, CO
    1 day ago
  • $22 - $25 per hour

     ...conveyors, cranes, hoists, and liftsMonitor production to meet daily and weekly output goals while maintaining quality standardsManage tooling and equipment inventory within the machine shopInspect finished products to ensure compliance with specificationsCommunicate... 
    Suggested
    Hourly pay
    Local area

    NOV

    Brighton, CO
    4 days ago
  • $22 - $25 per hour

     ...cranes, hoists, and lifts Monitor production to meet daily and weekly output goals while maintaining quality standards Manage tooling and equipment inventory within the machine shop Inspect finished products to ensure compliance with specifications... 
    Hourly pay
    Local area

    NOV

    Brighton, CO
    4 days ago
  • Air Squared Manufacturing, Inc. seeks a CNC Machine Operator for multiple shifts in Thornton, CO. Load/unload parts on pre-programmed CNC mills and inspect with a CMM, using offsets on mills and lathes as needed. Requirements include a high school diploma or GED and ~1 ...
    Flexible hours
    Shift work

    Air Squared, Inc.

    Brighton, CO
    3 days ago
  • $22 - $26 per hour

    Air Squared in Thornton, CO is hiring a CNC Machine Operator for the 3rd shift. You will run pre-programmed CNC mills, load/unload parts, and verify dimensions using a CMM inspection machine while maintaining tolerances per blueprints. The role requires a high school diploma...
    Hourly pay
    Shift work
    Night shift

    Air Squared, Inc.

    Brighton, CO
    5 days ago
  •  ...and maintain a clean, safe work environment with adherence to HSE policies. Responsibilities include monitoring production, managing tooling, inspecting finished parts, and reporting to the Facility Manager. Prioritized safety and quality are essential, with veterans... 

    NOV

    Brighton, CO
    3 days ago
  • $22 - $26 per hour

     ...and unload parts utilizing pre-programmed CNC mills Load and inspect parts on a pre-programmed CMM inspection machine Use work and tool offsets on manual mill and lathe machines Use hand tools on machined parts when needed Tighten and loosen fasteners to hold parts and... 
    Full time
    Casual work
    Shift work
    Night shift
    Day shift
    Afternoon shift

    Air Squared, Inc.

    Brighton, CO
    3 days ago
  • 48forty Solutions, LLC is seeking a Saw Shop Operator in Henderson, CO to set up and operate power saws for slotting, cutting, and trimming wood for pallets. This role supports the pallet manufacturing process and requires attention to safety and quality. The position offers...
    Day shift

    48forty Solutions, LLC

    Henderson, CO
    5 days ago
  • $19 - $20 per hour

    Do you want: To work with cutting-edge machinery in a safety-first environment? A company that invests in its people with great benefits and profit sharing? Consistent shift work with weekly pay? This opportunity could be perfect for you! Machine...
    Weekly pay
    Contract work
    Monday to Friday
    Shift work

    Snelling Recruiting and Executive Search

    Broomfield, CO
    3 days ago
  • $26 - $29 per hour

     .... Proficient operating CNC machines and reading blueprints/technical drawings. Strong understanding of machining principles, tooling, and feed/speed parameters. Experienced with precision measuring tools (calipers, micrometers, gauges). Multi-axis CNC and CAD... 
    Permanent employment
    Contract work
    Day shift

    Snelling

    Broomfield, CO
    2 days ago
  •  ...dimensionally.CAM experience is a must! GibbsCam preferred.Basic computer skills such as excel, email and navigating windows.Own personal hand tools – calipers, micrometers, etc.Strong mechanical aptitude.Ability to multi-task and ensure scheduled work is completed on time.Provide... 

    MMA Design LLC

    Broomfield, CO
    12 hours ago
  • $35 - $45 per hour

     ...simultaneous 5-axis toolpaths in hyperMill from customer models and drawings - Plan jobs end to end: workholding and fixture design, tool selection, operation sequencing, and work offsets - Set up, prove out, and run first-article parts, working directly with Quality to... 
    Hourly pay
    Permanent employment
    Shift work
    Night shift
    Weekend work
    Day shift
    Afternoon shift

    SCHOTT MANUFACTURING SOLUTIONS

    Frederick, Weld County, CO
    7 hours ago
  •  ...Supervisor when needed Quality & Inspection: - Follow work instructions, prints, and job travelers - Perform basic inspection using hand tools (calipers, micrometers, gauges) - Identify and report defects, nonconformances, or inconsistencies - Ensure parts meet cosmetic and... 
    Part time
    Apprenticeship

    Hirsh Precision Products, Inc.

    Frederick, Weld County, CO
    8 hours ago
  • $20 - $35 per hour

     ...aerospace and defense parts. Operators load, run and inspect parts to the setup sheet. Setup machinists also set work offsets and tooling, prove out first parts, and hand off clean, repeatable jobs to the next shift. What You Will Do - Set up and run CNC mills and 5-axis... 
    Hourly pay
    Permanent employment
    Shift work
    Night shift
    Weekend work
    Afternoon shift

    SCHOTT MANUFACTURING SOLUTIONS

    Frederick, Weld County, CO
    7 hours ago
  •  ...Career Development Hiring Immediately Welcome to Love's! Tire Technicians work in a fast-paced environment and maintain clean places with...  ...in shop and roadside service. Be responsible for equipment repair and maintenance of the store facility including general housekeeping... 
    Immediate start
    Flexible hours
    Night shift

    Love's

    Hudson, CO
    3 days ago
  • $22 - $26 per hour

     ...unload parts utilizing pre-programmed CNC mills Load and inspect the parts on a pre-programmed CMM inspection machine Use work and tool offsets on manual mill and lathe machines  Use hand tools on machined parts when needed Tighten and loosen fasteners to hold... 
    Full time
    Casual work
    Shift work
    Night shift

    Air Squared Manufacturing Inc.

    Thornton, CO
    3 days ago
  • $19 - $20 per hour

    Do you want: To work with cutting-edge machinery in a safety-first environment? A company that invests in its people with great benefits and profit sharing? Consistent shift work with weekly pay? This opportunity could be perfect for you! Machine Operator Pay Range: $19...
    Weekly pay
    Contract work
    Monday to Friday
    Shift work

    Snelling Recruiting and Executive Search

    Broomfield, CO
    3 days ago
  • $26 - $28 per hour

     ...fabricate parts. Loading parts in machines, cycling machines, and detecting malfunctions in machine operations such as worn or damaged tools. Running production lots. Detecting and reporting defective materials or questionable conditions to management. Performing... 
    Hourly pay
    Permanent employment
    Relocation package

    MKS Instruments

    Broomfield, CO
    2 days ago
  • $15.9 per hour

     ...CNC equipment to produce parts according to blueprints, work instructions, and quality standards. You will use precision measuring tools, including micrometers, to verify dimensions and help keep production running smoothly. The work environment is a fast-paced manufacturing... 
    Hourly pay
    Weekly pay
    Full time
    Temporary work
    Immediate start
    Shift work
    Night shift
    Day shift
    Afternoon shift

    Ascend Staffing

    Broomfield, CO
    3 days ago
  • $26 - $28 per hour

     ...fabricate parts. Loading parts in machines, cycling machines, and detecting malfunctions in machine operations such as worn or damaged tools. Running production lots. Detecting and reporting defective materials or questionable conditions to management. Performing... 
    Hourly pay
    Relocation package

    MKS Inc.

    Broomfield, CO
    5 days ago
  •  ...Tire Shop Associate Balances, installs, and rotates tires. Stocks tires and batteries and repairs tires. Answers questions, makes recommendations, and assists members with purchasing/returning tires and batteries. Provides a high level of member service. Job duties... 

    Costco Wholesale Corporation

    Broomfield, CO
    1 day ago
  • $16.5 - $26.45 per hour

     ...completing work according to company policies, procedures, and the Code of Conduct. Installation and maintenance of tires and wheels; repairing, rotating, and inflating tires; attaching and rebalancing wheels; installing/rebuilding and/or relearning/calibrating TPMS;... 
    Minimum wage
    Full time
    Temporary work

    Les Schwab Tire Centers

    Firestone, CO
    3 days ago
  • Westlake Royal Building Products in Henderson, CO is seeking a Machine Operator I to join our production team under the supervision of the Production Supervisor. The role involves water treatment, tile inspection, sealer duties, strapping pallets, and kiln exit quality ...

    Westlake Royal Building Products

    Henderson, CO
    1 day ago
  • $35 - $60 per hour

     ...Alignment Technician Do you enjoy working in a clean shop and would like to provide excellent service to our valued customers? If so,...  ...part of our service team, providing top-notch maintenance and repair services for diesel vehicles. Your primary focus will be on diagnosing... 
    Hourly pay
    Price work
    Local area
    Shift work

    Summit Truck Bodies

    Frederick, Weld County, CO
    1 day ago
  • $23 - $31 per hour

    Sam's Club in Thornton, CO is hiring a Tire & Battery Center Technician - Automotive to provide safe and efficient service in both sales and service areas. You will collaborate with associates to meet member expectations and deliver value. Responsibilities include assisting... 
    Hourly pay

    Walmart Inc.

    Brighton, CO
    5 days ago
  • $23 - $31 per hour

    (USA) Tire & Battery Technician - Automotive Thornton, CO (USA) Tire & Battery Technician - Automotive Sam's Club #4745 9601 Grant St Thornton...  ...sales and service requests educating other associates on tools tasks resources and mentor new technicians communicating and... 
    Hourly pay
    Minimum wage
    Full time
    Temporary work
    Part time
    Work at office
    Immediate start
    Shift work

    Walmart Inc.

    Brighton, CO
    5 days ago
  • $26 - $34 per hour

     ...and make realtime adjustments to maintain accuracy and efficiency Blueprint Interpretation Read technical drawings to determine tooling, fixtures, and machining parameters FirstArticle Verification Inspect initial parts and adjust setups to ensure conformance InProcess... 
    Weekly pay
    Contract work
    Temporary work
    Shift work
    Weekend work
    Day shift
    Thornton, CO
    29 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!