Manual Machine Shop
American Cap Company Inc
Job Description
Job Description
JOB TITLE/CLASSIFICATION: Manual Machinist
DEPARTMENT: Manual Machine Shop Plant Manager
REPORTS TO: PREPARED BY: Human Resources
SUMMARY :
A bargaining-unit, working position responsible for the operations to construct, repair, troubleshoot and improve progressive dies, deep draw, and/or forming. Applies root cause analysis to tooling breakages and premature failures. Examines dies and tooling components and recommends design modifications regarding construction and functionality. In addition to the tool making, the Tool & Die Maker applies sound processes and procedures to coordinate die changes, set ups, and maintains progressive dies.
ESSENTIAL DUTIES AND RESPONSIBILITIES :
Record all necessary data pertaining to assigned job instructions.
Work under the direct supervision of the Plant Manager.
Recommends revisions in design and/or substitutions in material based on machine ability or fabrication problems encountered.
Leads tooling projects and the work of set-up personnel. May provide guidance to less experienced employees or apprentices.
Modifies or repairs existing tooling and progressive dies.
Verifies conformance of machined and stamped parts to specifications through the use of calipers, micrometers, gauge blocks, height gages, etc.
Inspects product and makes adjustments accordingly
May operate stamping presses.
Ability to enter, follow, and modify pre-generated programs associated with the equipment.
o Follow standard work, 5S/TPM, and safety procedures; maintain a clean, organized cell and perform routine operator-level maintenance.
o Communicate abnormalities, material/tool needs, and improvement ideas to supervision and maintenance.
o Support training and cross-training of co-workers as assigned.
MINIMUM QUALIFICATIONS AND REQUIREMENTS:
o Gauging & Metrology
o Proficient use of production gauges, including (as applicable): calipers (to 0.001"), micrometers (outside/inside to 0.0001"), and go/no-go gauges, ultrasonic, etc.
o Ability to select the correct gauge, zero/verify calibration status, take repeatable measurements, and document results on production/quality records.
o Able to determine conformance to Quality Assurance specifications and tolerances shown on job travelers/prints.
o Machine/Cell Proficiency
o Demonstrated ability to start up, operate, and monitor department machinery.
o Perform basic offsets/parameter adjustments within authorized limits; change tools; verify tool condition and request replacements.
o Ability to interpret blueprints.
Experienc e
o Minimum 5 years manufacturing/production experience (or equivalent training).
o Apprenticeship or vocational training for Tool Maker and/or Die Maintenance.
o Strong analytical and troubleshooting skills.
o Experience in tooling maintenance and repair including progressive, transfer and/or draw tooling.
o Math & Documentation
o Ability to add, subtract, multiply, and divide in whole numbers, fractions, and decimals; convert between inch/metric; calculate simple rates and averages.
o Competent use of a calculator and basic data entry in paper or electronic production/quality forms.
o Communication
o Effective written and verbal communication with operators, quality, maintenance, and supervision; able to report abnormalities and hand off between shifts. o Quality & Safety
o Read and follow work instructions, job travelers, schedules, and basic prints.
o Adhere to 5S/TPM and all safety policies; wear required PPE; complete required internal certifications (e.g., Lock Out | Tag- Out (“LOTO”), forklift/overhead crane) if assigned.
STANDARDS OF PERFORMANCE
o Productivity: Maintain an efficiency rating of ≥ 80% against established standard work or engineered standards, averaged over a rolling four-week period, after completion of training/qualification.
o Quality/Safety: Meet first-pass quality requirements and comply with all safety procedures and PPE rules; repeated safety or quality violations may disqualify an otherwise acceptable efficiency rating.
Monday - Friday 7 am - 3 pm.- ...is responsible for setting up, operating, and maintaining manual and/or CNC machines to produce precision parts that meet print and quality requirements... ...processes and cycle times Follow safety, quality, and shop procedures at all times Required Qualifications ~...SuggestedApprenticeship
$38 per hour
...Maintenance Technician installs, maintains, and repairs CNC and manual machining centers while supporting general facility maintenance in a... ...support maintenance, alignment, and quality checks. Operate shop equipment including cranes, grinders, and hand tools to perform...SuggestedPermanent employmentFull timeImmediate startMonday to Friday- ...Summary: Making tool and parts as per requisition, support shop floor. Assist Maintenance and Production department with break down... ...procedure. Selects and grinds tools in accordance with hardness, machine ability and other properties of the parts to be machined....Suggested
- ...OH location. SUMMARY The Machinist role overall is to use machine tolls to make or modify parts. In addition to tool and die assembly... ...are safely operated and in good condition to be used by the operator. Repair and maintenance of machine shop equipment....Suggested
- ...OH location. SUMMARY The Machinist role overall is to use machine tolls to make or modify parts. In addition to tool and die assembly... ...be used by the operator. Repair and maintenance of machine shop equipment. Requirements QUALIFICATIONS Must be able to...Suggested
$50k - $75k
Job Description Job Description For a quick application text APPLY1 to 82174 About Dent Wizard Dent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people...$25.13 - $48.03 per hour
...the following: ~ Electrical/electronic systems ~ Engine repair ~ Engine performance ~ Automatic transmission/transaxle ~ Manual drivetrain/transmission ~ Automotive heating/AC ~5 years of automotive repair experience, demonstrated skills via third party assessments...Daily paidMinimum wagePrice workTemporary workLocal areaFlexible hours$21 per hour
...industries, or looking for long-term career growth and a defined career path. If you're searching for entry-level automotive jobs, tire shop jobs, or tire technician jobs in Hermitage, PA, apply for our open Tire Technician position today! Not located near Hermitage?...Full timePart timeCurrently hiringImmediate startShift work$30 per hour
...diagnose and fix breakdowns on production equipment, including CNC machine tools and their controls, PLC-driven systems, motor drives,... ...plant such as a forge, steel or tube mill, foundry or heavy machine shop is a plus Benefits ~ Health, dental and vision insurance...Hourly payFull timeApprenticeshipShift workRotating shiftDay shift$19 - $30.97 per hour
Senior Technician The Senior Technician position requires your talent and technical expertise to diagnose drivability and electrical systems, while using your leadership and mentoring skills in driving a team toward increased customer care and satisfaction. Pay Range...Daily paidPrice workTemporary workLocal areaFlexible hours- Diehl Hyundai of Sharon Is Looking To Add Technicians To Our TeamFour day work week! $10,000 Sign On Bonus!Our group and our SHARON STORE are growing and evolving daily. Adding skilled new members to the Diehl family is key to the success of our state-of-the-art NEW facility...Price workLocal areaRelocation package
$35 - $37 per hour
...Carrier Safety Administration (FMCSA), company and any other Federal, State or Local regulations. Interpret work orders and technical manuals. Repair or replace defective parts, components or systems. Test repaired equipment for proper performance and ensure the work meets...Full timeLocal areaFlexible hoursShift workNight shift$29.56 - $30.43 per hour
...routine equipment inspections to identify potential issues before failures occur Read and interpret electrical schematics, technical manuals, wiring diagrams, and work orders to complete repairs Assist with installation, startup, and commissioning of new manufacturing...Monday to FridayShift workAfternoon shift$100k
Automotive Service Technician / Mechanic Attention all Experienced Automotive Technicians and Master Automotive Technician Flynns Tire & Auto Service is the RIGHT PLACE FOR YOU! Why Flynns Tire? Earn up to $100,000/year depending on your skill level, experience,...Base plus commissionFull timeShift work- ...their automotive skills and build a long-term career. Preferred qualifications include: Previous quick lube, dealership, tire shop, or automotive service experience is a plus Basic automotive mechanical knowledge Ability to safely use automotive hand and power...Full time
$25.95 - $27.95 per hour
...must operate under the guidance of experienced mechanics and/or Shop Management. If you are looking for a rewarding and challenging career... ...and documents such as safety rules, operations / procedure manuals and maintenance instructions with a high comprehension and concentration...Traineeship- ...reading building prints and designs Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools Spray foam insulation and undercoating as required in buildings May install windows, door panes, handles...Worldwide
$19 - $26 per hour
...electrical schematics, mechanical drawings, blueprints, and technical manuals. •Perform scheduled preventive maintenance, inspections,... ...environment. •Ability to weld, fabricate, and use basic machining tools. Work Environment This is an on-site industrial manufacturing...Hourly payFull timeRelocationShift workDay shift- ...Job Functions : Take ownership of the sale, removal, and replacement of tires up to, but not limited to, commercial vehicles in shop and roadside service. Be responsible for equipment repair and maintenance of the store facility, including general housekeeping duties...Immediate startFlexible hoursNight shift
$27 - $33 per hour
...0 pounds Job Duties: Perform preventive maintenance on manual, semi-automated, and automated production equipment. Troubleshoot... ...issues using PLC display monitors, CNC controls, and other machine interfaces. Read and interpret electrical schematics, ladder...Long term contractContract workNight shift$5,000 per month
Production Positions At NLMK NLMK offers $5,000 Maintenance sign on bonus! PLEASE NOTE: NLMK is looking for Production positions for both the Farrell AND Sharon Coating locations. Your application will be considered for either one of the locations. To be considered...Temporary workRelocation package$34.34 per hour
ElectricianYou may not know our name, but you know our products. What we make is part of the places where we live, work, and play – all day, everyday.Zekelman is a family of companies – 100% domestic manufacturers – with a legacy dating back to 1877. We're proud to be ...Full timeRotating shift- CAR WASHER / DETAILER Diehl Kia of Hermitage - Hermitage, PA Diehl Kia of Hermitage is looking for a hardworking and dependable Car Washer/Detailer to join our growing dealership team. This is a great opportunity for someone who takes pride in their work, enjoys ...
$28.56 per hour
...for assessment of reliability and performance Read, analyze, and interpret technical procedures, electrical schematics, service manuals, and work orders to perform required maintenance and service Support the installation of new equipment Assist operators with...Hourly payMonday to FridayShift work- ...and more. Come build a career you believe in. What You'll Do Lay out work and set up machining operations according to specifications. Experience with a manual lathe required. Experience with Bridgeport milling. Operate machine tools and fabricate or...Shift workRotating shift
$34.34 per hour
Electrician You may not know our name, but you know our products. What we make is part of the places where we live, work, and play – all day, everyday. Zekelman is a family of companies – 100% domestic manufacturers – with a legacy dating back to 1877. We're proud...Full timeRotating shift- ...Job Description Duties and responsibilities Perform machine setups (calibration, cleaning, etc.) to start a production cycle... ...include loading & unloading work products (lifting work pieces manually or using appropriate equipment), controlling & adjusting the...Local areaShift work
- ...Crankshaft Group (ECG) to set up an interview! Ellwood Crankshaft and Machine is the world's leading manufacturer of large, one-of-a-kind,... ...verbal communication skills.Preferred QualificationsPrevious manual grinding experience or equivalent education.Prior CNC...Full timeCurrently hiringImmediate startShift workNight shiftRotating shift
- BULL MOOSE TUBE COMPANY, a progressive organization dedicated to meeting our customers perception of quality, has a career opportunity for a Maintenance Technician with a strong electrical and general mechanical background at our Masury, Ohio manufacturing site. Prior...Full timeLocal area
- ...maintenance projects without disturbing guests Supervise a team of maintenance technicians Update operational procedures and process manuals, as necessary Communicate all problems and resolve them or make recommendations to upper management for resolution Manage...For contractors
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Manual Machine Shop. Be the first to apply!




