CNC Press Brake Operator - Up to $30.50/hr (53167)
$30.5 per hourAdecco
Press Brake Operator
Remember to check your CV before applying Also, ensure you read through all the requirements related to this role.
Pay: $25.50 - $30.50 per hour, depending on experience
Shift Availability
1st Shift
- Monday through Friday, 5:00 AM - 1:30 PM
- Must be available to work Saturdays as needed
2nd Shift
- Monday through Thursday
- Must be available to work Fridays as needed
Job Summary
The Press Brake Operator is an advanced skilled position responsible for the setup, programming, and operation of CNC-controlled forming, cutting, and rolling equipment. This role requires the ability to independently perform complex machine setups, programming, troubleshooting, and production operations while maintaining quality and safety standards.
The Press Brake Operator may also assist with machine setup, operation, and training of less experienced operators. This position works under limited supervision, receives specific work assignments, and resolves most production issues with minimal supervisory assistance. All work is subject to first-piece and final inspections to ensure quality standards are met while minimizing material waste and labor costs.
The successful candidate is expected to follow departmental 6S standards and support the company's continuous improvement and Six Sigma initiatives.
Essential Duties & Responsibilities
Other duties may be assigned as necessary.
- Review job and production orders and interpret prints, blueprints, and drawings to determine work requirements.
- Perform bending and forming operations using standard and custom punches.
- Utilize CNC controls to input and modify machine programs.
- Adjust ram and back gauge locations according to blueprints and process control instructions.
- Measure and inspect parts using tape measures, calipers, gauges, and other precision measuring instruments.
- Perform complex programming utilizing all available press brake features.
- Produce quality parts for assembly operations.
- Meet customer specifications, quality expectations, and delivery requirements.
- Program CNC equipment to manufacture new parts according to specifications.
- Conduct spot inspections and quality checks throughout production.
- Configure bend allowances for sheet metal and plate steel, including stainless steel, aluminum, and carbon steel.
- Ensure machines are properly calibrated, maintained, and cleaned.
- Perform routine and minor maintenance according to established procedures.
- Prepare and clean product surfaces as required for fabrication processes.
- Monitor machine performance and production output to ensure quality and efficiency.
- Maintain a clean and organized work area, including fabrication equipment and tools.
- Follow all safety policies and procedures at all times.
- Ensure all work complies with ISO requirements and company quality standards.
- Assist in training and supporting less experienced operators when needed.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Qualifications
Knowledge, Skills & Abilities
- Strong knowledge of metal fabrication and forming practices and processes.
- Experience operating and setting up press brakes and ring rollers.
- Ability to read and interpret blueprints, shop drawings, and job specifications.
- Ability to perform intermediate mathematical calculations related to fabrication work.
- Knowledge of structural metals and material properties.
- Skilled in the use of fabrication tools and precision measuring instruments, including:
- Scales
- Protractors
- Fixed-angle gauges
- Radius gauges
- Knowledge of workplace safety practices and occupational hazards.
- Strong communication and teamwork skills.
- Ability to work independently and maintain high-quality standards.
Experience
- Minimum of 3 years of press brake or related fabrication machine experience required.
Education
- Formal apprenticeship training preferred but not required.
Certifications
- Forklift Operator Certification preferred.
Physical Requirements
- Lift up to 100 lbs. occasionally.
- Lift up to 50 lbs. frequently.
- Move materials up to 250 lbs. with assistance.
- Frequent standing, walking, kneeling, crouching, stooping, squatting, and twisting.
- Occasional climbing and sitting.
- Close vision, distance vision, peripheral vision, and depth perception required.
Work Environment
Work is performed in a metal fabrication, welding, and assembly shop environment.
Employees may be exposed to:
- Hot materials and surfaces
- Welding glare and flashing
- Sparks, metal chips, and flying debris
- Fumes and airborne particles
- Chemicals and cleaning agents
- Moving machinery and mechanical equipment
- Wet or humid conditions
- Outdoor weather conditions as required
- Noise levels at or above 85 dBA
Required Personal Protective Equipment (PPE)
- Safety glasses
- ANSI-approved safety shoes
- Gloves as needed
- Hearing protection
- Protective outerwear and additional PPE required by specific job sites
Pay Details: $25.00 to $29.00 per week
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
Equal Opportunity Employer/Veterans/Disabled
Military connected talent encouraged to apply
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
- The California Fair Chance Act
- Los Angeles City Fair Chance Ordinance
- Los Angeles County Fair Chance Ordinance for Employers
- San Francisco Fair Chance Ordinance
Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. xhyhwjd An employer who violates this law shall be subject to criminal penalties and civil liability.
- ...Summary The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications... ...be required to occasionally lift up to 50 pounds, and will frequently lift up to 2... ...Job Type: Full-time 2nd Shift - 2:30 pm - 11:00 pm Monday through Friday PIac...SuggestedFull timeMonday to FridayAfternoon shift
$26 - $30 per hour
...Job Full Description CNC Machinist / Setup Operator Location: Muskego, WI Shifts Available... ...st, 2nd, and 3rd Shift Pay: $26.00-$30.00 per hour (based on experience)... ...extended periods. Ability to lift up to 50 pounds occasionally. Frequent...SuggestedHourly payShift workNight shiftDay shiftAfternoon shift- ...world. About the Role: The CNC Machinist is responsible for the setup, operation, programming, and... ...Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently... ...machines such as lathes, drill presses, power saws and mills where...SuggestedContract workApprenticeshipAfternoon shift
$26 - $30 per hour
...CNC Machinist / Setup OperatorWe are seeking a skilled CNC Machinist/Setup Operator to join our manufacturing team in Muskego, Wisconsin. This... ...periods.Ability to lift up to 50 pounds occasionally.Frequent... ...include:Competitive pay of $26-$30 per hourHealth, dental, and vision...SuggestedShift workDay shift- ...sound and growing company seeking Punch Press Operators to join our team. In business since 1974,... ...growth and expansion through laser cutting, brake forming, robotic and manual welding,... ...team environment. Ability to lift up to 50-pounds. Must be reliable, and have good...SuggestedFull timeAfternoon shift
- ...privately held, financially sound and growing company seeking a Press Brake Operator to join our team. In business since 1974, we are a vertically... ...of working in a team environment. Ability to lift up to 50-pounds. Must be reliable and have good attendance....Full timeContract workDay shift
$16 per hour
...Job Description Job Title: Machine Operator Status: Hourly Position Reports to:... ...promptly at shift change. Must leave the press/work area clean and organized at the end of... ...attendance requirements earn an additional $2.50 per regular hour. The perfect-attendance...Hourly payShift workAfternoon shift$25 - $30 per hour
...in Muskego, WI, as a Full-Time CNC Gear Setup Machinist! This exciting... ...ranges from $25 to $30 per hour, reflecting our commitment... ...experience, this full-time position operates Monday through Friday. In this... ...stand lift carry up to 50 pounds push kneel bend...Hourly payFull timeRelocation packageMonday to Friday- ...Description Job Description CNC Process Engineer Primary... ...successful implementation and operation. Utilize vendors and suppliers... ...family-owned company with over 50 years of experience in the machining... ...the 1st of the month following 30 days of employment that...Work at office
- ...produces machined parts by programming, setting up, and operating computer numerical control (CNC) machines and machining centers; maintaining quality and... ...stoop, and occasionally lift objects weighing up to fifty (50) pounds. This role requires specific vision abilities,...Permanent employmentContract workWork at officeWorldwideFlexible hoursShift work
$26 - $29 per hour
...Job Title: CNC Machinist Job Description We are seeking... ...skilled CNC Machinist to set up and operate CNC mills or lathes for short... .... We offer a 401k match of $.50 per dollar up to 8% and tuition... ...position is $26.00 - $29.00/hr. Individual compensation offered...Weekly payContract workTemporary workShift workDay shiftAfternoon shift- ...CNC Operator 1st ShiftSenior plc is an international, market-leading, engineering solutions provider with 30 operating businesses in 13 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers...Permanent employmentTemporary workFor contractorsImmediate startWorldwideDay shift
$50 - $60 per hour
...CNC ProgrammerThis role suits an experienced 5-axis CNC milling programmer and machinist... ...programs at the machine.CNC setup and operating experience, with a solid understanding... ...pay range for this position is $50.00 - $60.00/hr. Individual compensation offered for this...Contract workTemporary work- ...Description Job Duties & Responsibilities Set up, adjust and operate one or more Swiss CNC Lathe machines to produce metal components with tight... ...based on experience. OT Available. 1st Shift: 7:00 am to 3:30 pm Company Description Northern Gear & Machining is a...Day shift
- ...CNC ProgrammerGPAC just partnered with an established manufacturing company that's looking for a CNC Programmer. 1st shift! You'll... ...material take-offs and run times for estimating, and support the operators on the shop floor when programs need troubleshooting.What you'll...Day shift
- ...expand their skills while helping create packaging found on store shelves across the country. Quad is seeking a Sheetfed Second Press Operator at our Franklin, WI location. We are seeking a candidate who are flexible and could work any of these shift options, as...Monday to FridayFlexible hoursShift work
$20 - $40 per hour
...: Union Grove, Wisconsin 53182 Position: CNC Swiss Setup Machinist Employment: Full-Time Pay: $20.00–$40.00/hr Based on Experience Equipment: Star Swiss... ...machining services. Founded in 1981, Camco operates a variety of CNC equipment including Star...Hourly payFull timeImmediate start- ...Machining Location: Union Grove, Wisconsin 53182 Position: CNC Machine Operator Employment: Full-Time Shifts: 1st or 2nd Shift... ...experience and are comfortable doing more than loading parts and pressing Cycle Start, we want to hear from you. ⚙️ What You’ll Be...Hourly payFull timeShift workDay shiftAfternoon shift
- ...HyPro. We are looking for an experienced CNC Setup Technician who is ready to take the... ...changes. • Performs some follow-up operations, such as deburring, polishing, grinding and... ...work at HyPro? Family owned company with 50 years of experience in the machining industry...Weekly payWork at office
- ...prepare heat exchanger components for brazing operations.Perform brazing activities in accordance... ...strong work ethic.Ability to lift up to 50 pounds and work in a production environment... ...companyScheduleFull-time: 6am - 2:30 pmOvertime available based on business needsEqual...
- ...take charge of their own success. Whether an operator, sales rep, a graphic artist or a... ...better way. Quad is currently seeking a Second Press Operator to work in the Pewaukee, Wisconsin... ...standing for long periods of time, lifting up to 50 pounds, stooping, pulling, pushing, and...Local area
$25 - $32 per hour
...Job Description CNC Set Up Machinist Shift: 2nd, (2PM-10PM) Pay: $25-$32/Hr. We are seeking experienced CNC Set-Up Machinists with a strong background... ...environment. Job Description: Set up and operate CNC milling machines to produce precision metal...Shift workAfternoon shift$18 per hour
...CNC Machinist 1st & 2nd Shifts Northern Gear & Machining is seeking experienced CNC Operator/Machinist for 1st & 2nd Shifts to collaborate with a team dedicated to the success of our customers. There is a $2 shift premium for 2nd shift. $18 per hour starting pay! Responsibilities...Hourly payRelocationMonday to FridayFlexible hoursShift workNight shiftDay shiftAfternoon shift$35 - $52 per hour
...Senior CNC Machinist Specialty Large Part Machining Richfield, WI | Full-Time | 1st Shift (5:45 AM 2:15 PM) & 2nd (2:00 PM - 10:00... ...for an experienced Senior CNC Machinist to independently set up, operate, and program large CNC machining centers while producing complex...Hourly payFull timeApprenticeshipRelocation packageDay shiftAfternoon shift$20 - $40 per hour
...Union Grove, Wisconsin 53182 Position: CNC Lathe Setup Machinist Employment: Full-Time Equipment: Okuma CNC Lathes • Live Tooling •... ...components and production machining services. Founded in 1981, Camco operates a variety of CNC equipment with a strong focus on Okuma CNC...Hourly payFull timeImmediate start$28 - $35 per hour
...CNC Machinist / ProgrammerLocation: Muskego, WI Pay: $28.00 - $35.00 per hour (based on experience) Job Type: Full-TimePosition SummaryWe... ...candidate will have experience programming, setting up, and operating CNC equipment while maintaining strict quality and production...Hourly payShift work$22.72 per hour
...and adding to our team! We have a need for additional vertical press machine operators, on multiple shifts, at our Burlington, WI facility. The... ...inches tall, due to safety and ergonomics. Ability to lift 30 pounds. Ability to stand for the entirety of your shift in...Hourly payFull timeMonday to FridayShift workNight shiftDay shiftAfternoon shift$33 per hour
...CNC Setup Machinist – 2nd Shift, 4-Day Work Week (3-Day Weekends) Up to $33.00/hr + 2nd Shift Premium • East Troy, WI • 2nd Shift (Mon–Thu, 3:00 PM–1:30 AM) • Direct Hire • Earn up to $33.00/hr plus a generous... ...and medical industries. Operating on a fixed 4-day, 2nd shift...ApprenticeshipShift workWeekend workDay shiftAfternoon shift3 days per week$21 - $25 per hour
...Gear & Machining is seeking an experienced CNC Nakamura Machinist. This is for Twin... ...change tooling and inserts. Be proficient operating multiple machines, high productivity. Ability... ...' experience 1st Shift: 7:00 am - 3:30 pm Mondays - Fridays 2nd Shift: 3:30...Monday to FridayShift workDay shiftAfternoon shift$33 per hour
Job Description Precision CNC Setup Machinist (1st or 2nd Shift Available) Up to $33.... ...codes SHIFT OPTIONS 1st Shift: 7:00 AM - 3:30 PM (Monday - Friday) 2nd Shift: 3:00 PM -... ...fully climate-controlled facility that operates under a strict continuous improvement mindset...Hourly payPermanent employmentFull timeMonday to FridayShift workDay shiftAfternoon shift3 days per week
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Press Brake Operator - Up to $30.50/hr (53167). Be the first to apply!




