2026-2027 Crafts II - Locksmith @ Maintenance Department
Alief ISD
Crafts II - Locksmith @ Maintenance Department
Primary Purpose: To maintain district facilities and sites in a condition of operating excellence so that full educational use is available at all times.
Qualifications: Education/Certification: High school graduate or GED equivalency preferred. Valid Class C Texas driver's license (as needed for specific area) with a safe driving record to pass a DMV check. Posses appropriate license(s) and/or certification(s) as required by any local, state, and/or federal regulatory agency.
Special Knowledge/Skills/Abilities: Knowledge in primary maintenance trade of computer systems doors, door hardware, locks and access controls. Ability to follow written and oral instructions and able to adjust daily routine. Possess skills required to meet performance responsibilities. Able to use all tools and equipment. Knowledge of safety requirements for maintenance services of buildings, equipment, and grounds. Ability to work in exposure to all weather conditions.
Experience: Experienced in skilled applications in the primary maintenance trade for which the applicant applies.
Major Responsibilities and Duties:
Maintenance and Operations
- Assume responsibility to make skilled repairs of any nature in facilities and sites owned by the district.
- Perform skilled repair and/or new work as requested on approved work order request.
- Receive and complete work orders in a timely manner. Maintain accurate records on material and labor used.
- Recognize when assistance is needed to solve problems.
- Examine district owned facilities owned by the district on a regular basis for purposes of preventative maintenance.
- Comply with working guidelines of the department.
- Inspect jobs upon completion and ensure areas are clean.
- Respond to emergency calls as needed.
Safety
- Take all safety precautions related to all trades and report any hazardous situations.
- Remove and/or advise foreman of any hazardous situations noticed while working on school grounds and sites.
- Follow established safety procedures and techniques to perform job duties including lifting and climbing. Operate tools, equipment, and machinery according to prescribed safety procedures. Follow safety guidelines as listed in the Maintenance Services Department safety manual.
- Correct unsafe conditions in work area and promptly report any conditions that are not immediately correctable to the foreman.
- Follow established procedures for locking, checking, and safeguarding equipment and facilities.
- Perform preventive maintenance on tools and equipment to make sure equipment is in safe operating condition.
- Follow district safety protocols and emergency procedures.
Inventory and Equipment
- Implement and maintain preventive maintenance schedules for tools and equipment.
- Ensure that vehicles and equipment are in safe operating condition and notify foreman if not.
- Maintain inventory of district-owned tools, equipment, and materials.
Other
- Follow district safety protocols and emergency procedures.
- Maintain an appropriate level of technology competence to meet the current and future needs of Alief.
- Implement alternative methods of instruction as needed.
- Perform other duties as assigned.
Supervisory Responsibilities: None
Evaluation: Performance of this job will be evaluated in accordance with provisions of the Board's policy on evaluation of Manual Trades - Maintenance Personnel.
Mental Demands/Physical Demands/Environmental Factors: Tools/Equipment Used: Standard office equipment including computer and peripherals; small hand tools, power tools, trucks, vans and trailers; heavy equipment such as backhoe, tractor, forklift, trencher, etc. Vision and Hearing: Moderate to maximum. Posture: Frequent standing and walking up to 6 hours; sitting up to 2 hours; kneeling/squatting, bending/stooping, twisting, pushing, pulling, crawling, reaching, and twisting; standing/walking, and climbing, wrist turn, and grasping occasionally. Motion: Repetitive hand motions; frequent keyboarding and use of mouse; frequent walking, climbing ladders and scaffolding; grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving. Lifting: Frequent lifting up to 50 pounds and rarely lifting 51-75 pounds and occasionally lifting 76-100 pounds. Carrying: Frequent carrying up to 50 pounds and occasionally carrying 51 to 100 pounds. Environment: Work outside 25% and inside 75%; on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures (30 O 110 O F), dust, toxic chemicals and materials, noise, and vibration; work around moving objects or vehicles; may work alone; occasional prolonged or irregular hours. Mental Demands: Work with frequent interruptions; maintain emotional control under stress.
This document describes the general purpose and responsibilities assigned to this job and is not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.
Hiring administrators review applications, interview, and recommend for hire. Calendar Days: 260. Pay Grade: MT07. 2026-2027 Salary Range Min. $21.21 Mid. $25.51 Max. $29.33 (Based on previous experience).
Alief ISD- ...needed Experience Level: Mid-Level Department: Flex Machining --- Why This Role... ...operations. As a CNC Machinist (Machinist II) , you’ll play a key role in producing... ...components Perform preventative maintenance per PM schedules Inspect machines for...SuggestedFull timeFlexible hoursShift workDay shift
- ...businesses safe and secure by providing industry-leading commercial locksmith and door solutions. We take pride in our family-oriented... ...devices for data entry and communications. Possession and maintenance of a clean driving record without restrictions. Familiarity...Suggested
- Ceco Concrete Construction is seeking a Field Technician II to join our Houston operations. The role involves advanced testing, inspections, and QA on concrete projects, supporting field operations, and mentoring junior technicians. The candidate should have at least one...Suggested
$25 - $28 per hour
...Job Description EHC is currently looking for a Machinist II - Second Shift for a client on the south side of Houston, TX.... ...equipment functions and servicing. Able to perform preventive maintenance as assigned Demonstrates working knowledge of the process flow...SuggestedNight shiftAfternoon shift$25 - $28 per hour
...Job Description Job Description CNC Machinist II | $25.00–$28.00/ hr + $1.00 shift differential | Evening/Night Shift (4:00... ...modifying CNC programs to improve efficiency • Perform preventive maintenance and provide technical support for tooling and equipment...SuggestedHourly payWeekly payShift workNight shiftAfternoon shift- ...Locksmith The Locksmith is responsible for the repairs and maintenance of all District facilities in relation to administering the District's lock program; performs all related work as required or assigned. All employees of SISD are expected to act with integrity...Night shift
- ...CNC Machinist II The CNC Machinist II is responsible for independently setting up and operating CNC machinery to fabricate precision parts, interpreting advanced blueprints and technical drawings, and adjusting machining processes to maintain tight tolerances. This role...
- ...Job Description Job Description Independent Contractor Locksmith – Commercial/Retail A&D Lock and Key is looking for an experienced locksmith contractor for commercial and retail service calls. Requirements: Must have own tools & transportation Strong...For contractorsFlexible hours
- ...CNC Machinist II - Mfg - Night Shift Houston, TX 77029 Overview Level Experienced Description The CNC Machinist will manage computer numeric controlled (CNC) equipment from setup to operation, producing parts and tools from different resources. The Machinist...Night shift
- ...Locksmith Technician Houston, TX Description Technician Reports to Operations Team Apprentice or Journeyman. Install, service and repair electro-mechanical locks and related door hardware in commercial, industrial, and institutional facilities. Core Values...ApprenticeshipLocal area
- ...In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair...
$21 - $25 per hour
...Authorization: U.S. Person required (ITAR compliance) Published: February 3, 2026 Apply Link: [Apply via hireCNC] --- Why This Role Exists Safespill is scaling fast — and our CNC milling department is critical to delivering high-precision components that protect...Hourly payFull timeFlexible hoursShift workDay shift- ...LEKTRO®, JetAire®, JetPower®, AmpTekÔ, Jetway®, and more. The Locksmith installs, repairs, replaces, and maintains mechanical and... ...performing minor door and hardware repairs, completing preventative maintenance, maintaining service records, delivering excellent customer...Permanent employmentFull timeNight shiftDay shiftAfternoon shift
$40 per hour
...-9 month project, work expected into mid 2027 ~40hr and 166 per diem ~55+ hours a week... ...is anticipated to close on Oct 20, 2026. Workplace Type This is a fully onsite... ..., construction, aviation, facilities and maintenance. We provide the expertise, solutions and...Weekly payDaily paidContract workTemporary workWork at officeNight shiftAfternoon shift$25 - $28 per hour
...numbers, and hold tags. Perform daily maintenance check sheets. Operate forklift and... ...skills. Ability to interface with inter-departments to meet business goals. Experience... ...1, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to...Temporary workLocal areaImmediate start- Job Title Location 4018 Westhollow Parkway, Houston, TX, 77082, United States Employee Type FT Hourly Non-Exempt Required Degree High School Manage Others No Minimum Experience 5 Years Description Requirements SummaryHourly pay
- Job Description Job Description We are looking for experienced HVAC Duct Mechanics / Installers for multiple projects in Houston TX area . You will be responsible for installing, repairing, and replacing various types and sizes of ductwork (Sheet Metal and/or Fiberglass...
- ...Summary: The Shear/Press Brake Operators' primary duties are to craft parts and tools from metal, plastic or other materials using a... ...•Operate heavy machinery such as Forklifts •Preventative maintenance (operator level) as needed •Report and document basic...
- Job Description Job Description Custom Air Products & Services, Inc. (CAPS)is a Houston-based, full-service HVAC company specializing in the design, fabrication, installation, and servicing of industrial and commercial air conditioning and heating systems. Since 19...For contractors
- ...Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 09/30/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier...Hourly payContract workWork at officeLocal area
- ...Manager. ~Responsible for assisting and training other employees when asked by Supervisor. ~Promote a team environment within the department. Cooperate and assists all departments in resolving issues as related to jobs. ~Follow all policies and procedures required by...Shift workWeekend workDay shift
- ..., and sub-spindles, including our new DN Solutions PUMA 2600SY II. The ideal candidate is a highly skilled setup machinist who... ...productivity and improve cycle times. Perform routine machine maintenance and maintain equipment in safe working condition. Work...Permanent employment
- ...make to every colleague, every day. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor....Temporary workShift workAfternoon shift
- ...all Manufacturing stress relief, forklift, phosphate, weekly maintenance, and crane log books are maintained. # Insure all Manufacturing... .... # Perform other duties as assigned. REPORTS TO: Department Manager/Supervisor/Lead Person as applicable per facility...Flexible hoursShift workNight shiftAfternoon shift
- ...Use your experience to set the standards in operations and maintenance, while working smart to maintain a healthy and safe environment... ...eligible to obtain the required authorizations from the U.S. Department of State). You can learn more about ITAR here. Venus Aerospace...Permanent employmentFlexible hours
- ...workbench, supply demand, material requirements Perform daily maintenance check sheet Operate forklift and pallet jack as required... ...Management Software Ability to interface with inter-departments to meet the goals of the business Experience training others...Casual workImmediate startMonday to FridayShift workDay shift
- ...Description CNC Machine Operator Job Type: Full-Time Department: Manufacturing / Production Position Summary We are... ...issues to the appropriate supervisor. Perform basic machine maintenance, cleaning, and housekeeping. Change tooling and make minor...Full time
- ...G-Code Fluency: Proficient in reading, writing, and editing raw G-code programs directly. Preferred Qualifications Compact II programming experience is a plus. Prior experience in oilfield manufacturing and machining heavy alloys. Why Join Texas Shapes?...Full timeWork at office
- ...machining and programming issues, and partners with the CAD Department to ensure first-time quality. The Quickmill Operator serves as... ...performance. Perform routine machine inspections, preventive maintenance, and maintain equipment in safe working condition....Full timeTemporary workImmediate startFlexible hours
- Job Description Job Description We are seeking highly skilled and experienced HVAC Sheet Metal Mechanics with a minimum of 5 years of experience in commercial construction. The ideal candidates will be responsible for fabricating, assembling, and installing sheet...Full timeLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to 2026-2027 Crafts II - Locksmith @ Maintenance Department. Be the first to apply!




