Material Handling Specialist
$23.97 - $28.88 per hourThe Gill Corporation
Material Handler
Salary Range $23.97 - $28.88 Hourly Position Type Full Time Job Shift Multiple Shifts
Description
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
The Gill Corporation is seeking a Material Handler to support the Honeycomb expander by preparing the pin plies prior to expansion. The Material Handler will also support the breakdown of blocks after they have been heat set as well as assisting with the actual expansion process.
Reporting to the Production Supervisor, the Material Handler will perform but not be limited to the following responsibilities.
- Load unexpanded blocks on to prep tables using Posi-turner hoist.
- Cut the aluminum foil by marking with template and using a box cutter.
- Pull up all the loops on one side of the block and flip using Posi-Turner and do the same for the bottom side of the block.
- Use the Big Joe to pick up new blocks on place on prep tables.
- Apply and practice 5S concept to maintain a safe and clean work environment.
- Must be able to lift, push, and pull a minimum of 50 lbs.
- Must be able to work overtime and weekends.
- Bring down blocks from Heat Set Ovens and place on 2x4's in preparation for break down.
- Remove the bars from the frames and place on cart. Ask for help to move the bars back to the expander.
- Remove rods from the frames and place back in their locations next to the expander.
- Remove the pin plies from both ends of the block and discard in trash bin across the isle.
- Inspect the block for proper length and width as well as cell count.
- Using a sharpie, record order information on the side of the block.
- Record information on paperless order in SAP.
- Record labor transactions in SAP.
- Perform scheduled PM's as prescribed.
- Assigned as a Quality Delegate to inspect in-process and final WIP in lieu of QA.
- Other duties may be assigned dependent on TGC business environment.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- High School Diploma
- Forklift Certification, with a valid California Driver's License with an acceptable driving record
- Must have English reading and verbal communication skills sufficient to read, understand, and communicate the company's operating procedures and policies.
- Must be able to lift, push and pull a minimum of 50 lbs.
- Must be able to demonstrate math proficiency equal to or greater than required for the position applied.
- Must be available to work the shift specified by the position and be flexible to potential overtime on weekends/ holidays.
ITAR Requirement:
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A "U.S. person" according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
The Gill Corporation is an Equal Opportunity Employer. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department
- ...Material Handler The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced...SuggestedPermanent employmentWork at officeLocal areaFlexible hoursShift workWeekend work
- ...Material Handler The Material Handler position is located in City of Industry, CA. You'll be excited about this opportunity because you will... Help insert and complete inspection orders while keeping areas clean and organized Responsible for maintaining materials...SuggestedWork at office
$18 - $26 per hour
Frito-Lay is seeking Warehouse Workers / Material Handlers to work in distribution centers loading, unloading, moving, and organizing snack products for delivery routes. Warehouse Workers are responsible for loading delivery trucks with product, unloading incoming shipments...SuggestedHourly payFull timeWork at officeShift workNight shiftWeekend work- ...Material Handler - 2nd Shift Eaton's IS AER FMC division is currently seeking a Material Handler - 2nd Shift. The core hours are 1:45pm to 10:15pm. The hourly rate for this position is 22.77 per hour. Please note the salary information shown above is a general guideline...SuggestedHourly payH1bWork at officeLocal areaImmediate startVisa sponsorshipRelocation packageAfternoon shift
$20 - $22 per hour
...Material Handler Acme Santa Fe Springs - Santa Fe Springs, CA 90670 Salary Range $20.00 - $22.00 Hourly Position Type Full Time... ...to optimize workflow Participates in any relevant material handling training as assigned by the Company; Performs other related...SuggestedHourly payFull timeMonday to FridayShift work- ...Build Your Career as a Material Handler From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape...
- ...Distribution Material Handler Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands... ...product and POS material. Utilizes manual and power material handling equipment. Sorts and places products or POS materials on racks...Work experience placementLocal area
- ...possess the following qualifications: 2-3 years' experience as a Material Handler. Forklift experience is required Experience in... ...Requires frequent heavy lifting up to 75 pounds. Able to handle a very fast paced working environment. Self-motivated, responsible...
- Aerotek - JobID: JP-005854311 [Warehouse Associate / Package Handler] As a Material Handler at Aerotek, you'll: Operate both sit-down and stand-up forklifts; Perform RF scanning, wrapping pallets, shipping, and receiving; Perform other duties as assigned...Hiring Immediately...Immediate start
$25 - $35 per hour
...integration. Your day‑to‑day operations will include: Verify all material received for conformity with accompanying paperwork Check for... ...and assist with loading and unloading of trucks Operate material handling equipment including, but not limited to, forklifts, pallet...Hourly payPermanent employmentShift workWeekend work$28 per hour
Job Title: Plasma Material Handling Associate Operator Pay Rate: $28/hr. Location: City of Industry, CA Zip Code: 91714 Duration: 3 Months... ...and other material handling equipment. As a skilled specialist using the Plasma Management System (SGP), this position supports...Contract workTemporary workLocal areaImmediate startWorldwideRelocationShift workDay shift- ...engine and power systems products. Responsibilities include designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures. The scope of responsibility will be for several...Full timeContract workWork experience placementLocal areaImmediate startDay shift
- ...-understood chemistry to high-energy energetics or one-source materials. Every formulation choice is also a unit-cost choice, and we... ...safety and compliance: storage planning, hazardous-materials handling, ATF and AHJ documentation. Skills We're Hiring For ~ B.S...Remote workWeekend work
- Adventist Health System - 1720 East Cesar E Chavez Avenue - Responsibilities: Receives and inspects deliveries of medical supplies and equipment; Organizes, categorizes, and labels inventory items; Maintains accurate records of stock levels and consumption; Monitors expiration...
- ...of education/related experience: Preferred * Experience in materials management, inventory control, or a related field, preferably... ...including infection control protocols. Implements safety measures in handling, storing, and distributing hazardous materials. Supports...Work experience placement
- ...professional with approximately 3+ years of experience in private equity. This role involves developing and maintaining investor materials, ensuring exceptional quality in fundraising documents, and partnering with senior leadership for investor interactions. The ideal...
- ...propulsion design and test experience ~ Experience with mono and bi-propellant chemical propulsion systems ~ Experience with handling and testing pressurized systems ~ Demonstrated history of designing fluidic systems, fluid system instrumentation, and control components...Full timeWork at office
$108.97k
...techniques for nanometer and micrometer-scale device fabrication. Master's degree (or foreign equivalent) in Electrical Engineering, Materials Science, Applied Physics, Physics, or a closely related field. $108,971/yr. Resume to: Pacific Light & Hologram, Inc., 808 Santa...- ...turning operation of complex configurations on a wide range of material types which will include the following: ~ Determining tooling... ...dimensional requirements, determine machine loading, setups, hardware handling instructions and scheduling. Perform risk assessments to...Full timeContract workWork experience placementLocal areaDay shift
- ...problems using root cause techniques. Guide the Machine Shop on material grade and bar stock selection to optimize tooling performance... ...this job, the employee is frequently required to use hands to handle, operate, and feel objects, tools, or controls, as well as...Full time
$103.6k - $155.4k
RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact...Full timeRemote workRelocationShift work$125k - $135k
...Demands ~ While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs, balance; stoop, kneel or crouch; talk and hear. The...For contractorsCurrently hiringWork at officeFlexible hoursNight shift- ...on early articles; transition routine NDE to an external Level III provider as build rate scales. Run the energetic-materials build line: handle the propellant ingredient set, the energetic and hazardous precursor chemistry, and the mix-and-cure operations safely day...Local areaRemote workWeekend work
$90.2k - $135.4k
Join Goodwin’s Global Operations Team, and make a real impact on a global scale. At Goodwin, we work with some of the world’s most successful and innovative investors, entrepreneurs and disruptors in the life sciences, private equity, real estate, technology and financial...Full time$122.43k - $194.39k
...robotics systems, including specifications, manuals, and training materials. Train and mentor other team members on the operation and... ...~ Applications experience with robotic material handling, assembly, vision systems, adhesive systems, material removal,...Temporary workWork experience placementWork at officeFlexible hoursWeekend work$75k - $120k
...Engineering LLC is an Ohio-based, full-service engineering firm specializing in structural engineering and design for the bulk material handling industry. As a key part of the TEP Group of Companies, we deliver world-class structural solutions across diverse industrial...Immediate startFlexible hours$140k - $170k
...scheduling optimization initiatives. Identify bottlenecks and implement recovery strategies. Improve setup times, queue times, and material flow throughout the facility. Lead continuous improvement and operational excellence initiatives. Develop operational...Permanent employmentWork at officeFlexible hours- ...manufacturing sites by preparing and submitting key documentation, including Request for Costing (RFC), New Product Set-Up (NPSU), Raw Material Set-Up (RMSU), and Specification Change Request (SCR); supports customer requests by creating product specifications with detailed...
$141.38k - $194.39k
...part of this transformative journey, where your impact will shape the future of technology and production. Purpose As a Senior Materials & Process engineer, you will help accelerate the adoption and qualification of new manufacturing processes through first...Temporary workWork at office$150k - $220k
...reindustrializing American manufacturing for the 21st century and beyond. Within Additive Manufacturing, we're developing and qualifying materials and processes across LPBF, DED, and polymer applications. We own the materials engineering work that makes that possible, and we'...Permanent employmentFull timeLocal areaRelocation packageFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Material Handling Specialist. Be the first to apply!
- material control El Monte, CA
- building materials El Monte, CA
- preferred materials El Monte, CA
- construction materials testing El Monte, CA
- building materials sales El Monte, CA
- outside sales building materials El Monte, CA
- material handling operator El Monte, CA
- material handling El Monte, CA
- materials specialist
- materials science engineering faculty position

