Welder (2nd Shift)
Bruno Independent Living Aids
MIG Welding And Fabrication
Perform MIG welding and fabrication duties without the use of fixtures; layout, fit and position weldments sequentially to create a custom stair-lift. Work from prints, drawings and job layouts. Use measuring tools to verify alignment and dimensions. Grind to mechanical requirements with a smooth cosmetic finish. Work is subject to first and final piece inspections for alignment, dimensions and aesthetic requirements.
Responsibilities
- Required to pass Bruno's weld test criteria, which includes AWS welding symbols and destructive weld test
- Knowledge of set up and operation of welding machines
- Table fabrication duties include: measure and weld the angle degree according to print with sections of material
- Read measuring tools (tape measure, square, dial calipers, digital protractor)
- Operate hand/air tools and electric grinders
- Read and interpret work instructions and AWS welding symbols from blueprints
- Perform MIG,TIG or fabrication welding assignments to meet daily production while maintaining standards of quality and quantity
- Angle change duties: Measure and weld the angle degree according to print with sections of material cut on saw during previous operation
- Build duties: Roll form material when required for large radius jobs (standard rolled turns will be provided by designated employees); assemble angle change, straight sections and turn to print using a MIG Welder and other fabrication tools while maintaining dimension and angle tolerances; form flanges and gear rack and install according to print
- Confirm angles and dimensions during fabrication and report any deviations to supervisor
- Identify and obtain accurate welding fixtures as called by work order
- Count and verify weldment ID Number; enter data into computer software to create paint tag for final operation
- Communicate shortages, scrap, delays and any deviation of standard work to the supervisor when applicable
- Complete daily timesheet and paperwork
- Maintain D1.1 welding certification. This applies to welders who complete welding operations that require D1.1 certification.
Qualifications
Education and Experience:
- High school or general education degree (GED) required.
- 1 year welding experience or equivalent advanced education required.
Skills and Abilities:
- Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- Complete standardized written documentation and correspondence. Professionally communicate in one-on-one and small group situations.
- Ability to perform basic electronic tasks using computer software and Microsoft Office.
Working Conditions/Physical Demands:
- Environment is a modern production facility with heat and air conditioning
- While performing the duties of this job, the employee is generally required to stand; use arms, hands and fingers to manipulate welding gun, hold fabrication parts in place, wire, fixtures and products and hold fabrication parts in place
- The job requires repetitive use of a MIG welding gun at shoulder level or below
- The employee is occasionally required to stand on an elevated step or ladder while performing the duties of this job
- Use of hands and fingers required to manipulate hand grinders and other fabrication tools
- Ability to stand, walk, squat, kneel, bend, twist and reach while performing the duties of this job
- Ability to lift up to 30 pounds, regularly
- Ability to lift 30 to 50 pounds, intermittently
- Ability to lift 50 to 70 pounds, with assistance, occasionally
- Ability to physically relocate product throughout the day, regularly
- The employee is required to reach and climb occasionally
- ...standard rolled turns will be provided by designated employees); assemble angle change, straight sections and turn to print using a MIG Welder and other fabrication tools while maintaining dimension and angle tolerances; form flanges and gear rack and install according to...Afternoon shiftWork at officeRelocation
$35 - $37 per hour
...Position Overview We are seeking a skilled and safety-conscious Welder to join a manufacturing team specializing in the fabrication of... ...the ability to perform physical tasks throughout the work shift. Stand and walk for extended periods, potentially seven...Afternoon shiftHourly payLocal areaShift work- ...Job Description Job Description Description: A Welder at D&H Industries performs a variety of welding utilizing MIG/Robotic Welders... ...welded to engineered specifications. SCHEDULE: This is a 2nd Shift position. ($3.00/hour Shift Premium) Hours: Monday through...Afternoon shiftWeekly payTemporary workLocal areaMonday to FridayShift work
- ...building high-quality solutions that help protect people, processes, and the environment. We're looking for skilled and motivated welders who want to develop their craft, take on meaningful challenges, and grow their careers through a structured skill progression path....SuggestedWork at office
- ...Welder gpac has partnered with a growing manufacturing company seeking a 1st shift welder. Excellent benefits! Requirements: - Experience with 3/32-inch flux-core wire or.045- or.052-inch solid wire - Must know weld symbols and basic blueprint reading Please...SuggestedDay shift
- Job TitleGMAW WelderJob DescriptionGain entry level skills to perform GMAW welding on a diversified line of standard weldments using American Welding Society welding symbols. Learn to set-up, fit and position weldments having a number of parts, use welding fixtures and...ApprenticeshipWork at office
- ...laser cutting, brake forming, robotic and manual welding, stamping, machining, and tool and die. This is a full-time position on 2nd shift (2pm-12am) Mondays-Thursdays including a 2nd shift, shift differential. Key Responsibilities Work involves extracting parts...Afternoon shiftFull time
- ...cutting, brake forming, robotic and manual welding, stamping, machining, and tool and die. This is a full-time position on 1st shift (5am-2pm) or 2nd shift (2pm-12am) including a 2nd shift, shift differential. Employees are stationed in a 100% air-conditioned facility....Afternoon shiftFull timeDay shift
- ...laser cutting, brake forming, robotic and manual welding, stamping, machining, and tool and die. This is a full-time position on 2nd shift (2pm-12am) including a 2nd shift, shift differential. Employees are stationed in a 100% air-conditioned facility. Key Responsibilities...Afternoon shiftFull timeContract work
$24 - $30 per hour
...Summary:This Direct Hire Metal Fabricator & Welder role offers strong hourly pay and a four-day workweek. This position focuses on hands-on fabrication and welding work in a production environment where quality, craftsmanship, and consistency are essential. The ideal...Hourly payDay shift$32 per hour
...WelderTrillium Construction is hiring Journeyman Level Welders in the Hartland, WI area!Work is Monday-Friday 6am-2:30pm. Pay rate is $32/hour. Work is long term. Work will take place in an industrial environment, building modular hospital rooms.Duties: -Reading prints...Monday to Friday- ...Welder PositionThe Welder is an experienced MIG and metal core structural welder responsible for laying out, fitting, aligning, welding, and fabricating large, heavy, and complex structural assemblies, components, and weldments. This position works to close tolerances...Local area
$32 per hour
...Trillium Construction is hiring Journeyman Level Welders in the Hartland, WI area! Work is Monday-Friday 6am-2:30pm. Pay rate is $32/hour. Work is long term. Work will take place in a Industrial environment, building modular hospital rooms. Duties:...Monday to Friday$24 - $32 per hour
...consider Kusel Equipment Co.: · $1,200 signing bonus · 1st Shift (6 AM - 2:30 PM) · Insurance offerings include, Health, Dental,... ...opportunity. Recent Weld School Grads will be considered. PRODUCTION WELDER duties, and responsibilities: 2+ continuous-recent years of...Relocation packageDay shift$18 - $28 per hour
...Robotic Welder Direct Hire Opportunity | Superior Skilled Trades Location: Hartland, WI Pay: $18.00–$28.00 per hour, depending on experience Schedule: 1st Shift - 6am - 2:30pm Employment Type: Full-Time | Direct Hire Job Overview Superior Skilled...Hourly payFull timeShift workDay shift- ...frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time 2nd Shift - 2:30 pm - 11:00 pm Monday through Friday PIa3bf246620de-31181-39109657...Afternoon shiftFull timeMonday to Friday
$16.25 per hour
...Summary: This full-time 2nd Shift Packer position focuses on preparing finished products for shipment while maintaining consistent quality standards. You will work with packaging materials, verify key details, and help keep production moving smoothly. The role offers...Afternoon shiftFull timeMonday to FridayShift work$20 per hour
...Summary:This role plays a key part in keeping food products safe, consistent, and ready for customers. Start times may vary on 2nd shift hours. The position offers hands-on lab work, regular production interaction, and the chance to support food safety standards every...Afternoon shiftMonday to FridayShift work$16.25 per hour
...skills. Hablantes de español son bienvenidos a aplicar! Hours: Monday to Friday, 3:15pm-11:30pm Pay: $16.25 plus a $2.00 per hour shift premium for any hours worked 3pm-11pm and a $3.00 per hour shift premium for any hours worked 11pm-7am Perks: Paid 30 minute...Afternoon shiftHourly payFull timeMonday to FridayShift work$25 - $30 per hour
...Job Full Description Now hiring a welder fabricator on 1st shift in Watertown! Pay : $25.00-30.00/hour Schedule : Monday-Friday 6:00am-2:30pm Work includes: Read and understand blueprints and weld symbols Operated welding, soldering, and brazing...Immediate startMonday to FridayDay shift- ...with a capacity to evaluate information to determine compliance with standards • Computer knowledge • Walk and stand for entire shift • Ability to lift 40 pounds unassisted Pay is based on experience and 2nd shift offers a $5/hr Shift Premium. #CelerityHiresAfternoon shiftShift work
$600 - $1,000 per week
...Oconomowoc WI 2nd & 3rd Shifts $600-$1000+/weekly Top performers earning $1400/weekly People want to work at Capstone because of our high-performance culture. We build strong relationships, challenge the status quo, work hard to deliver results, and pay it...Afternoon shiftWeekly payNight shift$19.5 per hour
...who enjoys active work and wants to grow their warehouse skills. Hours: Monday to Friday, 4pm-12am Pay: $19.50/hr, plus a $3 shift premium for any hour worked between 11:00 PM and 7:00 AM, or a $2 shift premium for any hour worked between 3:00 PM and 11:00 PM....Afternoon shiftFull timeMonday to FridayShift work- ...with Sentry's employee-owner cultureTeam Collaboration: Works effectively across production and support teamsAdaptability: Able to shift between product builds and priorities in a high-mix environmentWhat Sets This Role Apart at SentryOpportunity to work on complex, custom...Afternoon shiftWork at officeShift work
- ...skills and cultures. At IRI, we know that our success is directly tied to our clients' success. Job Description Shift Requirements: 1st and 2nd shifts (starting as early as 0630 and ending as late as midnight), every 3rd weekend and every 3rd holiday Float Requirements...Afternoon shiftRemote workShift workNight shiftWeekend workDay shiftEarly shift
$20 per hour
...CNC shop west of Oconomowoc is looking to add machinists on all shifts and is open to any skill level from Trainee to Skilled Machinist... ...candidates with no experience is $20 per hour on 1st shift ($23 on 2nd or $25 on 3rd). Based on experience, starting base pay ranges...Afternoon shiftHourly payTraineeshipMonday to FridayAll shiftsShift workNight shiftDay shift$25 - $30 per hour
About the Job: We’re looking for an experienced Welding Fabricator to join our team. This is steady, year-round work with plenty of opportunity to use your skills and grow with the company. If you take pride in quality work and have solid fabrication experience, we want...Full time$25 per hour
...extended periods of standing, frequent movement, bending, and twisting, and the ability to lift 50 pounds repeatedly throughout the work shift. Some tasks may involve climbing or working at elevated heights. Pay Details: $33.08 to $38.00 per hour Equal Opportunity...Afternoon shiftHourly payLocal areaShift work$42 - $56 per hour
...Journeyman Toolmaker (Toolmaker III) Richfield, WI | Full-Time | 1st & 2nd Shift Available Earn a 15% Shift Premium on 2nd Shift $42.00$56.00 per hour Build the Tools That Make Precision Manufacturing Possible. Every precision-machined component begins with exceptional...Afternoon shiftHourly payFull timeApprenticeshipShift workDay shift- ...Come Join Our Healthcare FamilyCompetitive Wages + PM/NOC Shift Differential! Great Benefits!Are you looking for a warm and cozy environment... ...to join that family!Generous wages plus shift differentials for 2nd and 3rd shift! Our shifts run 6a-2p / 2p-10p / 10p-6a.Job...Afternoon shiftShift workNight shiftRotating shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder (2nd Shift). Be the first to apply!




