BAS Controls Technician
$28 - $40 per hourCrown Staffing Solutions, L.L.C.
BAS Controls Technician
Job Type: Direct Hire
Pay: $28-$40/hour
Hours: Monday – Friday 7a – 3:30p (OT may be required)
We're looking for an experienced BAS Controls Technician to be responsible for the successful installation, startup, commissioning, and closeout of Carrier i-Vu Building Automation Systems on assigned construction and retrofit projects. This role serves as the technical lead in the field for controls execution and ensures systems are delivered in accordance with contract documents, design intent, and owner expectations.
The BAS Controls Technician works closely with the Project Manager, engineering team, mechanical contractors, electricians, and customer representatives to coordinate system installation, perform point-to-point verification, develop and validate sequences of operation, and deliver a fully functional, documented, and operator-ready BAS.
This position requires a strong balance of technical expertise, field coordination, documentation discipline, and professional communication to support efficient project delivery and long-term customer satisfaction.
Responsibilities
- Project Execution & System Startup
- Install, configure, and commission Carrier i-Vu BAS hardware and software on new construction and retrofit projects.
- Perform controller setup, network configuration, device addressing, and firmware management.
- Execute system startup activities including sensor calibration, device checkout, and functional testing.
- Complete point-to-point verification and confirm all field devices operate per design and control intent.
- Programming & Integration
- Develop, modify, and validate control logic and sequences of operation in Carrier i-Vu.
- Integrate BAS with mechanical systems such as AHUs, RTUs, chillers, boilers, pumps, VFDs, and terminal units.
- Support integration with third-party systems and protocols where required (e.g., BACnet/IP, MS/TP).
- Troubleshoot programming, communication, and operational issues through startup and occupancy.
- Coordination & Communication
- Coordinate field activities with Project Manager, low-voltage installers, electricians, mechanical contractors, and other trades.
- Communicate technical constraints, schedule impacts, and field conditions clearly and proactively.
- Participate in jobsite meetings, startup planning, and commissioning reviews as required.
- Serve as the primary BAS technical resource during startup, commissioning, and owner acceptance.
- Documentation & Closeout
- Maintain accurate field documentation including as-built drawings, device lists, and point schedules.
- Assist with development and completion of commissioning checklists and startup reports.
- Support project closeout documentation including O&M manuals, graphics verification, and backups.
- Ensure system readiness for inspections, functional performance testing, and owner training.
- Customer Support & Training
- Support owner demonstrations, system walk-throughs, and operator training sessions.
- Assist in resolving punch list items and post-startup adjustments.
- Provide professional, solution-oriented interaction with customers and facility staff.
Perform other duties as assigned
Qualifications
- High school diploma, GED, or equivalent
- 3+ years of experience in BAS controls installation, startup, and commissioning.
- Understanding of HVAC mechanical systems and control strategies.
- Ability to read and interpret control drawings, sequences of operation, and specifications.
- Proficiency in troubleshooting BAS hardware, software, and communication networks.
- Strong organizational skills with attention to documentation and detail.
- Ability to work independently in the field while maintaining alignment with project goals.
- Professional communication skills with internal teams and external stakeholders.
- Familiarity with construction project workflows and commissioning processes.
- Valid driver's license and ability to travel to project sites as required.
Preferred Qualifications
- Strong working knowledge of Carrier i-Vu Building Automation Systems; Experience with Carrier i-Vu strongly preferred; equivalent BAS platforms considered.
- Technical certifications or manufacturer training.
Working Environment
Work is performed in primarily commercial, industrial, institutional buildings, or other construction areas including outdoors environments with constant exposure to noise, dust, fumes, noxious odors, gases, mechanical and electrical hazards, metal shavings, moving objects, sharp edges, and temperature extremes.
Physical Demands
- Frequent and repeated hand and arm movement to manipulate tools and related objects.
- Frequent lifting up to 50 pounds individually, and team lifting heavier items.
- Standing and walking for extended periods of time.
- Frequent climbing of steps, ladders, and in/out/onto vehicles.
- Climb ladders and navigate through building mechanical rooms.
- Regularly bending, stooping, crawling, kneeling, reaching, and crouching.
- Visual acuity to drive motor vehicles.
- Hearing capacity to receive, perceive, and reach to common driving and working environment noises.
The physical demands described here are representative of those that must be met by an employee to successfully perform the primary duties of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the primary duties.
Crown Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
$75k - $115k
...year A bit about us: We are a North American HVAC&R and controls distributor, with over a dozen offices, that has a track... ...sustainability, cost management, and occupant comfort. As a BAS Technician/Programmer on our team, you will be responsible for installing...SuggestedFor contractorsFor subcontractorLocal area$35 - $65 per hour
...Commercial HVAC, Refrigeration, and of course, BMS and Industrial Controls. Key Responsibilities Perform preventive and corrective... ...controls and automation systems , including but not limited to: BAS/BMS controllers and field panels. EPMS and power-monitoring...Suggested- ...innovative Building Automation Solutions (BAS) that maximize energy efficiency and... ...sustainable building operations. Our solutions control and monitor building functions such as... ...Job Summary Are you a Commercial HVAC Technician with a talent for troubleshooting and a hunger...SuggestedFull timeWork at officeLocal areaFlexible hours
- ...Responsibilities: Determine the design and performance parameters for control system applications. Determine system I/O maps and help... ...Automation System programming. ~ Experience working with BAS software, user interfaces, and system integration platforms. ~...SuggestedWork at office
- ...Senior Controls Technician HTS Engineering Ltd. is the largest independent commercial HVAC manufacturers' rep in North America, with 20 locations... ...Process controls experience is not applicable to this senior BAS position. Senior controls technician: Will be...SuggestedContract workFor contractorsFor subcontractor
- ...Refrigeration, and of course, BMS and Industrial Controls. What You Will Do # Provide... ...controls technical support to HVAC technicians # Train and mentor less experienced technicians... ...Qualifications Experience in BAS, HVAC, or related industry Proficiency...Local area
- ...technical skills in the construction, installation, operation and maintenance of electric, electronic, direct digital and pneumatic controls associated with HVAC, Building Automation Systems and other related Systems. Monitors, synchronizes, repairs and maintains the...Relief
- ...Control TechnicianHTS Engineering Ltd. is the largest independent commercial HVAC manufacturers... ..., customers and end users.The Control Technician is the hands-on foundation of the controls field team and will support DDC/BAS or PLC project work based on business need,...For subcontractor
- ...commissions, and supports the smart lighting and controls systems that make schools, hospitals,... ...We’re growing our Lighting Controls Technician team and hiring at multiple levels: Entry... ...commissioning lighting controls or related systems (BAS, AV, security, networking) Schedule and...Full timeFor contractorsWork at officeMonday to FridayNight shift
- ...Electronics Controls Technician I Responsible for installing, testing, replacing and upgrading campus/department Control Systems as well as HVAC components and systems as applicable throughout the District. Education and Certification Requirements: High school...Work at officeImmediate start
$20 per hour
...Orkin. As an Orkin Pro, you’ll be the professional delivering on the promise of a safe place to live, work, and play behind pest control’s best-known brand . Be part of a purpose-driven team with a reputation built on almost 125 years of a service-minded...- ...Lead Service Technician The Lead Service Technician is responsible for providing on-site service, troubleshooting, maintenance, and support for Delta Controls Building Automation Systems (BAS). This role focuses on hands-on field work, ensuring customer systems operate...Daily paidOngoing contractTemporary workWork at officeRemote workFlexible hours
$500 per month
...of science and technology to develop solutions. As a Quality Technician in Applied Power Division, you’ll inspect custom components for... ..., and traceability documentation, and assist with calibration control of equipment. Help identify and track nonconforming material,...- ...HVAC & Environmental Building Controls Technician Texas Biomed is seeking an HVAC & Environmental Building Controls Technician who prefers... ...monitor, troubleshoot, and maintain building automation systems (BAS), building management systems (BMS), and HVAC control systems...Temporary workFor contractorsWork at officeFlexible hoursNight shiftDay shift
$34 per hour
Overview: Senior Electrical Controls Technician Location: Six Flags Fiesta Texas in San Antonio, Texas Department: Maintenance - Electrical Job Type: Full-Time, Year-Round Pay Rate: Starting at $34.00 per hour, based on experience Join our team at Six...Bi-weekly payHourly payFull time$35 - $50 per hour
...Job Description Job Description Experienced Controls Technician $35-$50 per hour, based on experience | San Antonio, TX Full-Time... ...Qualifications At least 2 years of hands-on experience with BAS/DDC systems Strong troubleshooting and programming background...Hourly payFull timeMonday to Friday- ...Maintenance Technician, Instruments and Controls Bakerly, a happy family-owned company, is proud to be home to one of the fastest-growing brands in the US food industry! We are a baked goods manufacturer that emphasizes delicious, premium, and authentic recipes using...For contractorsWork at officeFlexible hours
- ...Quality Control SpecialistAlpine Silica, a PF Holdings company based in Willow Park, TX, operates advanced facilities in key U.S. oil... ...protocols for quality control and may provide training to Lab Technicians/Loadout Operators, who sample, test and document materials...Local area
- ...Quality Control TechnicianBone Bank Allografts, a subsidiary of Globus Medical Inc., specializes in processing and distributing high... ...efficient allograft processing and distribution.The Quality Control Technician will work within the Quality Department and in-house...Flexible hours
- ...year ~ Company paid short-term and long- term disability, parental leave. ~ And more! About the role The Quality Control Technician (QCT) is responsible for the oversight of quality assurance related to service request data review and service request completion...Contract workTemporary workFor contractorsFor subcontractorWork at officeLocal areaImmediate startFlexible hours
$35.36k - $41.6k
...Department : Food industry, Type : Full Time Role:Quality Control Technician – Food Manufacturing Our Client is seeking a detail-oriented and dependable Quality Control Technician to support quality assurance and food safety operations within a food manufacturing...Full timeLocal areaShift workDay shiftAfternoon shift- ...Quality Control Technician IPOSITION CLASSIFICATION: Non-exemptDEPARTMENT: Quality AssurancePOSITION REPORT TO: Quality Assurance ManagerREVISION DATE: 9/14/2022SUMMARY: The Quality Control Technician II is responsible for ensuring Cuisine Solutions products meet the...Shift workNight shiftDay shiftAfternoon shift
- ...Quality Control TechnicianLocation: San Antonio, TX Employment Type: Full-Time Shift Options: 1st Shift: 7:00 AM – 3:30 PM 2nd Shift... ...Position OverviewWe are seeking a detail-oriented Quality Control Technician to support quality assurance and food safety operations within...Full timeShift workDay shiftAfternoon shift
$34 per hour
Overview: Senior Electrical Controls Technician Location: Six Flags Fiesta Texas in San Antonio, Texas Department: Maintenance - Electrical Job Type: Full-Time, Year-Round Pay Rate: Starting at $34.00 per hour, based on experience Join our team at Six...Bi-weekly payHourly payFull timeShift work$34 - $46 per hour
...HVAC Building Control Systems TechnicianJohnson Controls, a global leader in thermal management, mission-critical building systems,... ...customer satisfaction.May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians.Adheres to...Hourly payFor contractorsFor subcontractor- ...Description Job Description TFG is seeking Field Service Technicians to join our team across the Central, South, and Southeast Texas... ...connecting various components such as: compressors, motors, control panels, gauges, and other related components to ensure power connections...For contractors
$36 - $42 per hour
...helping drive it forward. Medium Voltage Field Service Technician I, Central Region Field based, Central region: Colorado, New... ...assisting with the installation, inspection, and maintenance of control wiring within SMA inverter and Medium Voltage systems. This...Hourly payFull timeTemporary workFor contractorsApprenticeshipH1bWork at officeHome officeShift workNight shift- ...Description Job Description Description The Field Service Technician IV provides face-to-face customer service located at an off-... ...the Department of Transportation Adheres to contamination control and HAZMAT rules and regulations Maintains all company equipment...Price workNight shift
$22 - $30 per hour
...Job Description Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience...Hourly payFor contractorsWork experience placementFor subcontractor- ...time hourly, with benefits & company vehicle Job Description: As a T.E.A.M. Solutions HVAC Controls Technician you will provide onsite Building Automated System (BAS) commissioning and support to our highly regarded clientele. Key Responsibilities: Coordination...Hourly payFull timeTemporary workFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to BAS Controls Technician. Be the first to apply!
- electrician technician San Antonio, TX
- hospital technician San Antonio, TX
- product development technician San Antonio, TX
- laptop technician San Antonio, TX
- logistics technician San Antonio, TX
- safety technician San Antonio, TX
- control technician San Antonio, TX
- chiller technician San Antonio, TX
- safety valve technician San Antonio, TX
- icu technician San Antonio, TX





