Senior Avionics Manufacturing Technician
Rocket Lab USA
Senior Avionics Manufacturing Technician
Rocket Lab Robotics is seeking an experienced Senior Avionics Technician to support the assembly, integration, and testing of advanced spaceflight electronics and electromechanical systems, including motion control electronics, motor controllers, spacecraft avionics, robotic systems, and other high-reliability flight hardware.
The Senior Avionics Technician is responsible for performing complex electronic assembly, electrical integration, functional testing, and troubleshooting activities in accordance with engineering specifications, approved manufacturing procedures, and aerospace workmanship standards.
This position requires strong hands-on electronics experience, proficiency with electrical test equipment, and the ability to independently diagnose and resolve complex electronic and electromechanical hardware issues. The successful candidate will demonstrate exceptional attention to detail, disciplined workmanship, sound technical judgment, and the ability to support multiple programs in a high-mix, low-volume aerospace manufacturing environment.
What You'll Get To Do:
Avionics Assembly and Integration
- Perform complex electronic and electrical assembly operations supporting development, qualification, and flight hardware.
- Assemble, modify, and integrate printed circuit board assemblies (PCBAs), electronic modules, motor controllers, wiring harnesses, connectors, and associated avionics hardware.
- Interpret electrical schematics, wiring diagrams, assembly drawings, bills of materials, and technical specifications.
- Perform precision soldering, rework, connector assembly, cable termination, and harness integration in accordance with approved procedures and applicable workmanship standards.
- Integrate electronic assemblies into mechanical and electromechanical systems, including robotic mechanisms and motion control hardware.
- Perform electrical continuity, insulation resistance, and connectivity verification as required by approved procedures.
- Identify assembly discrepancies, workmanship issues, and technical challenges and coordinate resolution with Engineering.
- Support implementation of engineering changes, hardware modifications, and controlled rework activities.
Electrical Testing and Troubleshooting
- Perform functional, electrical, and system-level testing of avionics and motion control electronics in accordance with approved test procedures.
- Set up, configure, and operate electrical test equipment, including oscilloscopes, multimeters, power supplies, signal generators, electronic loads, and other applicable instrumentation.
- Independently troubleshoot electronic assemblies, motor controllers, power distribution circuits, communication interfaces, and associated electrical systems.
- Analyze electrical signals, test data, and circuit behavior to identify hardware faults and performance anomalies.
- Support development, qualification, and acceptance testing of avionics hardware.
- Collaborate with Electrical Engineering and Integration & Test Engineering to diagnose and resolve complex technical issues.
- Support automated test equipment, test fixtures, and data acquisition systems.
- Document test results, troubleshooting findings, corrective actions, and hardware configuration information.
- Assist with environmental testing and post-test functional verification as required.
High-Reliability Electronics Workmanship
- Perform electronic assembly and rework in accordance with applicable IPC, J-STD, NASA, and customer-specific workmanship requirements.
- Maintain appropriate electrostatic discharge (ESD) controls, contamination prevention practices, and flight hardware handling procedures.
- Inspect electronic assemblies for workmanship defects, solder joint quality, connector integrity, wire routing, and other applicable requirements.
- Maintain hardware identification, serial number traceability, and manufacturing documentation.
- Ensure electronic components and assemblies are properly handled, stored, and protected throughout manufacturing activities.
- Identify and document nonconforming hardware, workmanship defects, and test anomalies.
- Support Quality Assurance inspection, verification, and product acceptance activities.
- Maintain current workmanship certifications and technical qualifications as required.
Manufacturing Documentation and Configuration Control
- Perform manufacturing and test activities in accordance with approved work instructions, engineering drawings, travelers, and technical procedures.
- Accurately complete assembly records, test documentation, inspection checkpoints, and manufacturing travelers.
- Verify applicable hardware configuration and engineering revision levels prior to performing assigned operations.
- Document assembly issues, technical discrepancies, and recommended process improvements.
- Support implementation of engineering changes and revised manufacturing procedures.
- Maintain required material, component, and hardware traceability.
- Ensure manufacturing documentation is accurate, complete, and compliant with established quality requirements.
Manufacturing and Engineering Support
- Collaborate with Electrical Engineering, Manufacturing Engineering, Integration & Test Engineering, Quality Assurance, and Production personnel.
- Provide technical feedback regarding electronic assembly methods, testability, connector selection, wiring practices, and manufacturing constraints.
- Support engineering development, prototype, qualification, and flight hardware manufacturing activities.
- Assist with development and improvement of manufacturing work instructions, test procedures, and assembly methods.
- Support troubleshooting of manufacturing and test equipment.
- Identify opportunities to improve electronic assembly efficiency, test repeatability, and product quality.
- Communicate technical issues, equipment constraints, and schedule risks to the Production Manager and appropriate engineering personnel.
Technical Leadership and Continuous Improvement
- Serve as a senior technical resource for avionics assembly, integration, and troubleshooting activities.
- Provide technical guidance and mentorship to less-experienced avionics technicians and manufacturing personnel.
- Support training and qualification of technicians in electronic assembly methods, test equipment usage, and aerospace workmanship practices.
- Identify recurring manufacturing or test issues and recommend corrective actions.
- Assist with implementation of standardized assembly and testing practices.
- Promote technical excellence, disciplined documentation, and first-time quality.
- Contribute to improvements in manufacturing tooling, test fixtures, workflow, and equipment utilization.
You'll Bring These Qualifications:
- High school diploma or equivalent; additional technical education, vocational training, or military electronics training preferred.
- 7+ years of experience in electronics assembly, avionics manufacturing, electrical integration, or electronic hardware testing.
- Demonstrated experience assembling and troubleshooting complex electronic or electromechanical hardware.
- Proficiency interpreting electrical schematics, wiring diagrams, assembly drawings, and technical procedures.
- Experience performing precision soldering, electronic assembly, cable termination, and connector installation.
- Proficiency using electrical test equipment, including oscilloscopes, digital multimeters, power supplies, and signal generators.
- Demonstrated ability to independently troubleshoot electronic circuits, assemblies, and electrical systems.
- Working knowledge of electronic component identification, circuit operation, electrical measurements, and fault isolation.
- Experience working with controlled manufacturing documentation, hardware traceability, and quality procedures.
- Familiarity with high-reliability electronic workmanship requirements and ESD control practices.
- Ability to perform detailed technical work with a high degree of accuracy and independence.
- Strong technical problem-solving, organizational, and communication skills.
These Qualifications Would Be Nice To Have:
- Experience assembling and testing spacecraft avionics, motor controllers, motion control electronics, or robotic systems.
- Experience with high-mix, low-volume aerospace manufacturing and flight hardware production.
- Current or previous certifications in IPC J-STD-001, IPC-A-610, IPC/WHMA-A-620, or applicable NASA workmanship standards.
- Experience troubleshooting complex digital, analog, power electronics, and motor control circuits.
- Familiarity with embedded controllers, communication interfaces, sensors, encoders, and actuator electronics.
- Experience with electrical harness fabrication, integration, and verification.
- Experience performing component-level electronic troubleshooting and rework.
- Familiarity with automated test equipment, data acquisition systems, and test software.
- Experience supporting environmental, qualification, and acceptance testing of aerospace electronics.
- Familiarity with AS9100 quality management requirements.
- Experience with conformal coating, staking, bonding, and other high-reliability electronic assembly processes.
- Experience mentoring or training junior electronics or avionics technicians.
This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas.
Level and base salary will be determined
Rocket Lab USA$7.5k
.... Its technologies support industries including buildings, manufacturing, healthcare, data centers, and utilities worldwide. Benefits... ...documentation and compliance with safety and quality standards Train and mentor junior technicians to build team capability...SeniorTemporary workWorldwideAfternoon shift- Job Title: Aviation Electronics Technician (AE/AT) Category / Component: Enlisted • Active Overview Aviation Electronics, Electrical and... ..., troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications,...SuggestedTemporary workApprenticeshipWork at officeWorldwideNight shiftRotating shift
$40 - $52 per hour
...contribute to the build and development of avionics and software test assets for major... ...maintenance. As an essential part of the R&D technician team, you will demonstrate diverse... ...including installation of avionics hardware, manufacturing and routing of wire harnesses, and...SeniorHourly payPermanent employmentShift workWeekend work$35 - $50 per hour
...welders, presses, cutters, crimpers, torque tools, drills, rivet guns, and custom tooling Followed detailed work instructions and manufacturing procedures, performing all work in the MES system (scanning, material consumption, and built traceability) Provide hands-on...SeniorHourly payPermanent employmentShift workWeekend work- Stantec is seeking a Principal/Senior Principal Hydrogeologist to lead the Southern California groundwater and environmental services practice. The role emphasizes seller-doer responsibilities, technical leadership, and client growth across California. Ideal candidate...Senior
$131.5k - $197.2k
Your OpportunityWe are looking for a highly motivated Principal/Senior Principal Consultant with a demonstrated ability to win work, grow client relationships, and lead high-performing teams in a seller-doer capacity. This leadership role will be focused on expanding our...SeniorFull timeContract workTemporary workPart timeCasual workWork at officeLocal areaFlexible hours- ...Savant Senior Living, LLC. is seeking an Executive Director to oversee daily operations of the community, coordinate residents and staff, and drive quality care. You will lead budgeting, staffing, and performance management while upholding regulatory compliance and...Senior
$7.5k
...engineers , operating across 70+ countries and 4 major business areas . Its technologies support industries including buildings, manufacturing, healthcare, data centers, and utilities worldwide. Benefits ~401(k) match: Employer matches 87.5% of the first 8% of...SeniorTemporary workWorldwide- HCI Systems, Inc is seeking skilled DAS Designers and Senior Designers to design and generate DAS/ERRCS shop drawings, perform RF modeling, and prepare technical submittals and closeout documents. You will coordinate with project stakeholders to ensure code-compliant,...Senior
- Job Description Job Description One of the foremost litigation and trial law firms in Southern California seeks associate attorneys for both of our Pasadena and Costa Mesa offices. Associates will handle defense work in all phases of federal and state civil rights ...Senior
- ...Lively Packaging Design Studio is looking for a Senior Designer with fresh ideas for food and beverage packaging clients. Your portfolio should be 75% packaging with experience in the overall branding world, including digital and environmental assets. The look is bright...Senior
- ...ductwork, pipe sizing, and any other calculations required to support the mechanical design. Coordinate with equipment vendors and manufacturer’s representatives for the selection and specification of appropriate equipment. What We Are Looking For: ~ In possession of...SeniorInternshipWork at office
$7.5k
...engineers , operating across 70+ countries and 4 major business areas . Its technologies support industries including buildings, manufacturing, healthcare, data centers, and utilities worldwide. Benefits ~401(k) match: Employer matches 87.5% of the first 8% of...SeniorTemporary workWorldwide- ...and medical group operations leadership to achieve organizational objectives. You will offer strategic labor relations expertise to senior executives, lead bargaining teams, and drive cost-effective, competitive labor agreements #J-18808-Ljbffr Kaiser Permanente...Senior
- EisnerAmper’s tax team seeks a Tax Senior Associate to join the Affordable Housing practice in Birmingham. The role emphasizes preparation of complex returns, tax research, and client service excellence within a collaborative, growth-oriented firm. Qualified candidates...Senior
- ...Senior Designer Plaster & Patina is seeking a Senior Designer to lead high-end residential projects from concept through installation. We're a fast-paced, growing studio, and we're looking for someone who thrives on managing multiple projects while never losing sight...Senior
$7.5k
.... Its technologies support industries including buildings, manufacturing, healthcare, data centers, and utilities worldwide. Benefits... ...engineering teams through the planning and execution of avionics development programs. Define project scope, objectives,...SeniorTemporary workWorldwide- All Seniors Foundation is seeking a Home Health Social Worker to assist seniors in accessing essential services, provide emotional support, and guide families through healthcare, financial, and social resource navigation. This role emphasizes holistic elderly care, improving...SeniorWork from home
- Barry-Wehmiller Design Group in Pasadena, CA seeks a Sr. Project Manager to lead capital projects across pharma, biotech and industrial operations. You will oversee MEP design/bid/build, manage budgets, schedules, and client relationships, and collaborate with engineers...Senior
- ...Description UCLA Health is seeking a dedicated Senior Care Physician to join our innovative Senior Care Model clinic in Encino. This role is designed to deliver high-value, patient-centered primary care for adults aged 65 and older. Built on the Age-Friendly Health...Senior
- All Seniors Foundation is seeking an Outreach Specialist to develop and implement programs connecting seniors with essential services. You will engage with communities, health providers, and partner organizations to promote our resources and improve access for seniors....Senior
- All Seniors Foundation is seeking a Grant Writer to research, draft, and submit grant proposals that fund free programs serving Los Angeles seniors. You will translate impact stories into compelling foundation, government, and corporate funding proposals in collaboration...Senior
- WelbeHealth is seeking an Outreach Specialist to join our MOE team in California. You will build relationships with seniors, caregivers, and community partners to generate qualified referrals and guide prospective participants into the PACE program. Focus is on meaningful...SeniorLocal area
- ...Senior Litigation Attorney Our client is seeking an experienced Senior Litigation Attorney to join its growing Pasadena office. This role is ideal for a seasoned civil defense litigator with substantial trial experience who enjoys leading case strategy, mentoring junior...SeniorWork at officeImmediate start
- All Seniors Foundation in Los Angeles, CA is seeking a Senior Community Outreach Coordinator to build relationships with local organizations, develop outreach strategies, and connect seniors to our free services. This role targets applicants aged 55 and older, offering...SeniorLocal area
- ...We are seeking an experienced Senior IVR Developer / Senior Software Engineer to design, develop, integrate, and maintain scalable, secure, and reliable CRM and IVR solutions. The ideal candidate will have strong expertise in CRM platforms, IVR integrations, backend development...SeniorContract work
- Kaiser Permanente in Pasadena is seeking an experienced CDI leader to oversee clinical documentation reviews, drive the accuracy of medical records, and mentor teams across markets. You will lead data analyses, manage CDI queries, and partner with medical leadership to ...Senior
- All Seniors Foundation is seeking an Elder Abuse Prevention Coordinator to help safeguard seniors by identifying risk factors, educating staff and families, and implementing prevention strategies. You will collaborate with local authorities, social workers, and healthcare...SeniorLocal area
- Northeast Community Clinic in Alhambra, CA is seeking an Executive Assistant to provide high-level administrative support across the administration department. The role requires initiative, strong organization, and excellent communication to manage calendars, prepare reports...SeniorWork at office
- A staffing agency is seeking a Benefit Specialist III for its Pasadena office. The role involves ensuring the accuracy of premium payments and payroll deductions related to healthcare coverage. The ideal candidate will have strong analytical and communication skills, experience...SeniorContract workWork at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Senior Avionics Manufacturing Technician. Be the first to apply!
- senior living Pasadena, CA
- senior accountant manufacturing Pasadena, CA
- senior full stack web developer Pasadena, CA
- senior magento developer Pasadena, CA
- senior software design engineer Pasadena, CA
- senior international tax analyst Pasadena, CA
- senior manager accenture Pasadena, CA
- senior accountant remote Pasadena, CA
- senior software engineer Pasadena, CA
- senior devops engineer remote Pasadena, CA





