Civil Engineer (Geotechnical)

Summary This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This position is with the St Paul District, HIRING OFFICE Responsibilities The incumbent will serve as a Civil Engineer responsible for performing a variety of work in support of the districts geotechnical design program. Conduct studies pertaining to foundation stresses, seepage, slope and foundation stability, dewatering, grouting, and related data for inclusion in review, feasibility, and design memoranda reports to higher authority. Write reports and technical appendices for feasibility and design memo studies, incorporating results of design data and estimates of quantities. Responsible for geotechnical portions of plans and specifications and drafts technical provisions of contract specifications. Make inspection trips to earth construction projects to insure that the project is being constructed to conform to design requirements and to verify assumptions made during design. Develop preliminary and final design for earth and rock structures such as levees, rubble mound breakwaters, roads, channel improvements, cut slopes, and earth dams. Compile data and prepare correspondence pertaining to the Districts geotechnical design program. Requirements Conditions of Employment Qualifications Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Education Requirement for Civil Engineer (Geotechnical) 0810 series: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure, Written Test, Specified academic courses, and/or Related curriculum. Please see the following link for more detail: In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed above: GS-11: Specialized Experience: One year of specialized experience which includes meeting three of the following: 1) Prepare technical reports and/or design documentation for project planning or design decisions; 2) interpret geotechnical investigation, laboratory, and/or field data to support engineering guidelines; 3) perform geotechnical engineering analyses to evaluate soil, foundation, slope, settlement, and/or seepage conditions for engineering projects; 4) coordinate engineering activities with multidisciplinary project delivery teams to support project schedules or milestones; 5) review specifications, design documents, scopes of work, and/or engineering modifications for compliance with project requirements; 6) Conduct construction inspections to verify conformance with design requirements and/or recommend appropriate corrective actions. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. GS-12: Specialized Experience: One year of specialized experience which includes meeting four of the following: 1) Prepare technical reports and/or design documentation for project planning or design decisions; 2) interpret geotechnical investigation, laboratory, and/or field data to support engineering guidelines; 3) perform geotechnical engineering analyses to evaluate soil, foundation, slope, settlement, and/or seepage conditions for engineering projects; 4) coordinate engineering activities with multidisciplinary project delivery teams to support project schedules or milestones; 5) review specifications, design documents, scopes of work, and/or engineering modifications for compliance with project requirements; 6) Conduct construction inspections to verify conformance with design requirements and/or recommend appropriate corrective actions. This definition of specialized experience is typical of work performed at the lower grade/level position in the federal service (GS-11). "Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted". Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest. Direct Deposit of Pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is an Engineers and Scientists (Resources and Construction) Career Program position aligned under the Construction, Analysis, Science, Infrastructure & Engineers (CASIE) Career Management Directorate. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.