Class A Fitter Welder
$34 - $36 per hourHireCall
Job Description Class A Fitter/Welder - ASME Pressure Vessels & Boilers Location: West Tulsa, OK
Pay: $34.00-$36.00 per hour, depending on experience
Job Type: Full-Time
Schedule : Monday-Thursday, 6:00 AM-4:30 PM
Overtime: Friday and Saturday, 6:00 AM-2:15 PM, as needed Job Description HireCall is seeking an Experienced Class A Fitter/Welder for a manufacturing opportunity in West Tulsa, OK. This position involves fitting, fabricating, and welding pressure vessels, boilers, and waste heat recovery equipment built to ASME Code standards. Qualified candidates must have at least 5 years of welding and fitting experience in a manufacturing environment, including experience with pressure vessels, boilers, or heavy industrial fabrication. We are looking for someone who can independently read blueprints, lay out and fit complex assemblies, and perform high-quality TIG, Stick, and Flux Core welding. Candidates must be able to pass all required welding and fitting tests. Job Responsibilities
Pay: $34.00-$36.00 per hour, depending on experience
Job Type: Full-Time
Schedule : Monday-Thursday, 6:00 AM-4:30 PM
Overtime: Friday and Saturday, 6:00 AM-2:15 PM, as needed Job Description HireCall is seeking an Experienced Class A Fitter/Welder for a manufacturing opportunity in West Tulsa, OK. This position involves fitting, fabricating, and welding pressure vessels, boilers, and waste heat recovery equipment built to ASME Code standards. Qualified candidates must have at least 5 years of welding and fitting experience in a manufacturing environment, including experience with pressure vessels, boilers, or heavy industrial fabrication. We are looking for someone who can independently read blueprints, lay out and fit complex assemblies, and perform high-quality TIG, Stick, and Flux Core welding. Candidates must be able to pass all required welding and fitting tests. Job Responsibilities
- Read and interpret blueprints, fabrication drawings, and welding procedure specifications (WPS).
- Independently lay out, measure, cut, fit, tack, and weld pressure and non-pressure components.
- Fabricate cylinders, nozzles, tubes, tubesheets, headers, and structural components.
- Perform basic and advanced math calculations for accurate fitting and fabrication.
- Use measuring and leveling equipment to ensure proper alignment and dimensional accuracy.
- Perform FCAW (Flux Core), SMAW (Stick), and GTAW (TIG) welding.
- Weld in all positions, including flat, horizontal, vertical, and overhead.
- Work with carbon steel, stainless steel, chrome alloys, and nickel alloys.
- Produce welds that meet ASME Code, company, and customer quality requirements.
- Perform welding capable of passing X-ray inspections and other non-destructive testing (NDT).
- Operate carbon arc gouging equipment, cutting torches, grinders, and other fabrication tools.
- Inspect completed work for quality and accuracy.
- Perform additional shop labor and fabrication duties as needed.
- Maintain a safe, clean, and organized work environment.
- Minimum 5 years of welding and fitting experience in a manufacturing environment REQUIRED.
- Previous experience with pressure vessel, boiler, or heavy industrial fabrication REQUIRED.
- Strong hands-on experience with FCAW (Flux Core), SMAW (Stick), and GTAW (TIG).
- Ability to independently read and interpret blueprints and welding procedures.
- Proven experience laying out, fitting, and tacking pressure and non-pressure components.
- Experience fabricating cylinders, nozzles, tubes, tubesheets, headers, and structural components.
- Ability to perform basic and advanced math calculations.
- Proficiency with measuring, leveling, cutting, and fabrication equipment.
- Ability to weld in all positions.
- Experience working with carbon steel, stainless steel, chrome alloys, and nickel alloys.
- Ability to produce X-ray-quality welds meeting ASME Code requirements.
- Proficiency with carbon arc gouging equipment and cutting torches.
- Strong attention to detail and commitment to safety.
- Experience with Submerged Arc Welding (SAW) is a plus but not required.
- Extensive experience with ASME Code pressure vessel and boiler fabrication.
- Experience independently fitting complex industrial assemblies.
- 6-inch Schedule 80 pipe
- GTAW (TIG): Stringer/Root and Hot Pass
- SMAW (Stick): Fill and Cap
- FCAW (Flux Core) on 1/2-inch plate
- Demonstrate fitting, layout, measurement, and fabrication skills.
- Waste heat and process gas boilers
- Firetube and watertube boilers
- Steam drums
- Economizers and superheaters
- Pressure vessels
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Class A Fitter Welder in Tulsa, OK vacancy
$34 - $36 per hour
...Job Description Job Description Class A Fitter/Welders | $34–$36/hr Location: Tulsa, OK Schedule: Monday–Thursday Hours: 6:00 AM – 4:30 PM Friday & Saturday OT as needed Employment Type: Full-Time BlueWorx is hiring experienced Class A Fitter...Class a cdlFull time$28 - $30 per hour
...Welder - Night ShiftIndustrial Welder Pay: $28-30/hr Location: Tulsa, OK Hours: Monday–Thursday | 3:30 PM – 2:00 AMWelder Test: Class B welders: Ability to pass 6G pipe test, tube to tube, tube to plate Class A welders: Ability to pass 6G pipe test, XX Sch, TIG all the...Class a cdlNight shift$22 - $25 per hour
...Job Description Job Description MIG / Flux Welders – Structural Welding Location: Catoosa company Immediately HIRING Pay:... ...We are seeking experienced MIG and Flux Welders as well as Tig Class A Welders to join our team. The TIG welders can earn $28 - $32 per...Class a cdlHourly payWeekly payImmediate startMonday to FridayShift work$24 per hour
...Job Description Job Description Structural Fitter / ASME Welder (Class A or B) MIG / Flux Core – Day Shift Pay: $27+ DOE Location: Broken Arrow, OK Abundant Solutions is hiring experienced Structural Fitter / ASME Welders for a growing manufacturing facility...Class a cdlShift workDay shift- ...Pipe Fitter/WelderWe are seeking an experienced Pipe Fitter/Welder to join our fabrication shop. This position is responsible for the layout, cutting, prepping, fitting, and welding of process piping systems in accordance with shop and industry standards.Minimum RequirementsMinimum...SuggestedFlexible hours
$6,000 - $8,000 per week
Job Description CDL-A Regional Tanker Owner Operator \n \n Tulsa, OK \n \n * Out up to 6 days \n * Hauling chemicals in a liquid tanker... ...\n \n \n For 95 years, TransWood has been providing professional Class A truck drivers with consistent freight, top pay and great...Class a cdl$26.24 - $29.35 per hour
...Job Title: Fitter Welder Job Description This role focuses on welding metal components to fabricate and repair steel electrical poles, substations, and related structures in a manufacturing environment. The Fitter Welder uses MIG, flux core, and metalcore welding...Weekly payContract workTemporary workMonday to ThursdayDay shift$1,600 - $2,100 per week
...Maintain accurate logs and trip documentation and Communicate clearly with dispatch and driver managers. Requirements: Valid CDL Class A license. Clean motor vehicle record and background checks. Ability to pass a DOT drug screen.Urine and Hair Follicle Test....Class a cdlContract work$25 - $26 per hour
...Fitter WelderPay Rate: $25.00 - $26.00 per hour Shift: 4:30 pm to 3:00 am, Monday through Thursday Duration: 4 to 6 weeks, temporary only Weld Test: The welders need to be able to pass an ASME Section 8 Plate Test. Our test is a 3G 3/4 inch thick plate; open route MIG...Hourly payTemporary workMonday to ThursdayShift work- ...Job Description Job Description Class A & B Welders ~ Class A Welder **Products: Waste heat recovery equipment designed and built to ASME Code: waste heat and process gas boilers (firetube boilers, watertube boilers), steam drums, economizers, superheaters, Pressure...Class a cdl
- ...Additional Technician Perks: Boot allowance Paid prescription safety glasses Technician Requirements: Possession of a valid Class A or Class B commercial driver's license (CDL A or CDL B) preferred Position requires candidates to provide a standard set of hand...Class a cdl
- ...Pay Scale: Click for Labor Trades (LT) pay scale Licenses and Certificates: Possession of a valid Oklahoma Class "D" Driver's License; possession of a Class "B" Commercial Driver's License with applicable endorsements within six (6) months from date of hire with some...Class a cdlMonday to Friday
$15.63 - $41.54 per hour
...HPC Industrial, powered by Clean Harbors, is looking for a Class A CDL Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single...Class a cdlFull time- ...of subject matter experts. Now offering signing bonuses: Class A - $4,500 JOB SUMMARY: Fit-up and weld carbon steel and stainless... ...all Tig with a 1/2 " schedule 160 pipe. • Must be skilled fitter with verifiable experience • Must pass a written fitter...Class a cdlRelocation packageDay shift
$24.5 per hour
...Job Description Fitter Welder Pay: $24.50/hr Location: Tulsa, OK Shift: Day Shift - Monday-Thursday, 5:00 AM-3:30 PM Overtime: Available during the week with Supervisor approval Job Type: Fitter Welder Job Order #: 123842 Position...Full timeShift workDay shift$100 per hour
...CDL Class A Instructor Trainer160 Driving Academy is the largest CDL training school in the country — 14 years strong, 90+ locations across 32 states, training roughly 20,000 students a year with an overall 88% average first-time pass rate. Our instructors are why. As...Class a cdlHourly payDaily paidLocal areaRelocation packageNight shiftDay shift$24 - $26 per hour
...Job Description Job Description URGENT HIRING: STRUCTURAL FITTERS & WELDERS 20 IMMEDIATE OPENINGS | TULSA, OK Pay: $24$26/hour Location: 17411 E Pine St, Tulsa, OK 74116 Company: S & T Mfg. Co. SHIFT DETAILS 1st Shift: MondayFriday, 5:00 AM3:30 PM. 2nd Shift...Weekly payContract workTemporary workImmediate startShift workNight shiftDay shiftAfternoon shift$25 - $28 per hour
...Job Description Job Description Fitter Welder in Tulsa at $25–$28/hr DOE. Fit and weld structural and pipe work with MIG and TIG to print and quality standards. Quick facts: Pay: $25–$28/hr DOE Location: Tulsa, OK MIG and TIG welding Structural and...- ...applicable; and, (c) 1 year of operating experience. Licenses and Certificates: a) Possession of a valid Oklahoma Class "D" Driver license b) Valid Class "A" Commercial Driver's License (CDL) with X endorsement and a 3rd Class Stationary Engineer License (Some Positions...Class a cdlMonday to Friday
$103,700 - $181,610 per week
...Job Description Job Description Flatbed CDL-A Driver, Regional Route: $1,037.01 - $1,816.05 per week. System Transport is hiring CDL-A flatbed drivers for Texas and Oklahoma regional routes hauling steel, machinery, and building materials. Division 264 Texas...Class a cdl$1,040 - $1,275 per week
...2% of annual gross pay. Paid orientation. Paid time off after 6 months, plus 6 days of holiday pay per year. Qualifications Valid Class A Commercial Driver’s License (CDL). HazMat endorsement preferred. Passport, FAST card or Enhanced CDL opens more opportunities. Need...Class a cdlHourly payWeekly payFull timeApprenticeshipImmediate startRelocation package$1,825 per week
...CDL-A Dedicated Truck Driver: Home Weekly - Avg $1,825/wk & $2,500 Sign On Bonus. U.S. Xpress is ready to bring motivated drivers... ...with this truck driving job Qualifications: Must have Class A License (CDL A) & 21 years or older. Must have 3 months of verifiable...Class a cdlTemporary workRelocation packageFlexible hours$1,040 - $1,275 per week
...after 6 months, plus 6 days of holiday pay per year.Annual bonus: Earn up to 2% of annual gross pay each year.QualificationsValid Class A Commercial Driver's License (CDL).HazMat endorsement preferred.Passport, FAST card or Enhanced CDL opens more opportunities.Need CDL...Class a cdlHourly payWeekly payFull timeApprenticeshipRelocation package- ...Job Description Job Description WE TRAIN! Currently seeking CDL Driver's with a Class A OR B license. Your license MUST be unrestricted! All driving roles are in the elements, but you are home every night. Shift: Monday-Friday from 6AM-5PM and every other Saturday...Class a cdlLocal areaMonday to FridayShift workNight shift
- ...electrical and diagnostics schematics. · Active participation in training classes and development opportunities to increase skills and working... ...and willing and able to be trained in software systems. · Class A or B Commercial Driver’s License (CDL) preferred, or the...Class a cdl
- ...Must have delivery experience in 22'-28' curtain side flatbed. Current, valid, unencumbered CDL driver's license is required. (Class A or B) Clean driving record is required. Work hours are Monday - Friday *Home every night* Salary to commensurate with experience...Class a cdlHourly payWeekly payLocal areaMonday to FridayNight shift
$1,040 - $1,275 per week
...plus 6 days of holiday pay per year. ~ Annual bonus: Earn up to 2% of annual gross pay each year. Qualifications Valid Class A Commercial Driver’s License (CDL). HazMat endorsement preferred. Passport, FAST card or Enhanced CDL opens more...Class a cdlHourly payWeekly payFull timeApprenticeshipRelocation package- ...trucks. Must have delivery experience in 22'-28' curtain side flatbed.Current, valid, unencumbered CDL driver's license is required. (Class A or B) Clean driving record is required.Work hours are Monday - Friday *Home every night* Salary to commensurate with experience...Class a cdlHourly payWeekly payLocal areaMonday to FridayNight shift
- ...Local Delivery Driver (CDL A or B)Linde Gas & Equipment Inc.Tulsa, OK, United States | Work Schedule: 1st ShiftWhat you will enjoy... ...recent certification from a Truck Driving School, along with a valid Class A or B CDLThis role requires you to be 21 years or olderCurrently...Class a cdlLocal area
$24 per hour
...older.Ability to pass a pre-employment drug screen, DOT physical, and federal background check for railroad property access.Valid CDL (Class A or B) with tanker and air brake endorsements.5 years of total clean driving experience required.Ability to operate manual...Class a cdlDaily paidFull timeSeasonal workMonday to FridayFlexible hoursShift workNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Class A Fitter Welder. Be the first to apply!





