Operating Engineer
$26.35 - $31 per hourCushman & Wakefield
Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
- Perform all plumbing, electrical, or HVAC requirements of the building(s)
- Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
- Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
- Verify field conditions and perform any necessary repairs or adjustments
- Monitor Energy Management
- Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
- Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
- Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
- Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
- Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
- Document and report activities to supervisor
- Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
- Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
- Complete all required C&W Safety Training as scheduled annually
- Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
KEY COMPETENCIES
- Technical Proficiency
- Initiative
- Flexibility
- Multi-Tasking
- Sense of Urgency
IMPORTANT EDUCATION
- High School Diploma of GED Equivalent
- Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS
- Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
- May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
- Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
- Basic Computing Skills in Outlook, Excel & Word
- Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
- Knowledgeable in energy management systems, techniques and operations.
- Thorough knowledge in all building systems operations, maintenance and repair.
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.- Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
- Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
- Involves movement between departments, floors, and properties to facilitate work
- Ability to speak clearly so others can understand you
- Ability to read and understand information presented orally and in writing
- Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $26.35 - $31.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io. Please refer to the job title and job location when you contact us. INCO: “Cushman & Wakefield”- ...General Summary The Recycling Operations Facility Manager II (ROFMII) reports directly to the Recycling Operations District Manager (RODM... ...the facility by working closely with the Regional Safety Engineer(s). Ensures Environmental compliance in accordance with company...SuggestedHourly payFor subcontractorLocal areaFlexible hoursWeekend workWeekday work
- ...Automation Controls Engineer The Automation Controls Engineer is responsible for providing technical leadership and support for automation... ..., SCADA systems, industrial controls, instrumentation, and operational technology infrastructure. The Controls Engineer is...SuggestedWeekend work
- ...Controls Engineer II The Controls Engineer II is responsible for the advanced support of all phases of a controls project to include... ...and ability to contribute written descriptions of system operations for technical documents. Communicate with other team members...SuggestedContract workWork experience placementWork at officeLocal areaFlexible hours
$7.25 per hour
...and exceptional durability. Position Summary The Controls Engineer is responsible for designing, developing, commissioning, and... ...digitally connected manufacturing, enabling real-time visibility into operations through dashboards, system integration, and data...SuggestedHourly payFull timeWork at officeShift work$38 - $52 per hour
...Controls Engineer Louisville, KY Pay: $38.00-$52.00/hour Full-Time Controls Engineer Requirements ~ Bachelor's... ...productivity and cost efficiency Create detailed work instructions, operating procedures, and setup documentation Utilize lean...SuggestedFull timeWork at office- ...equipment. Assist the maintenance department in installing new electronic/electrical control equipment and making it operational. Develop engineering specifications for electrical control systems and equipment modifications. Provide technical support to the...Work at officeRemote workWorldwide
$95k - $180k
...construction industry's most respected contractors, owners, and operators. Headquartered in Silver Spring, MD, we employ driven... ...the Role We are currently looking for a Project Controls Engineer to provide scheduling support services to our valued client's...Full timeFor contractors$135 per day
...seeking a qualified and experienced Mechanical Commissioning Engineer for an on-site position. The position is set to commence the 1... ...ensures planning, preparation, and execution of the commissioning, operation, trial run, and acceptance testing for Water-Steam-Cycle and...Daily paidContract work- ...About the Role: As a CBREHVAC Engineer, you will be responsible for maintaining mechanical andelectrical equipment for complex commercial... ...maintenance on building HVAC equipment to ensure proper operation of equipment and compliance with all applicable codes,...Work at officeShift work
- ...Project Engineer The Project Engineer (PE) provides disciplined documentation control, workflow execution, and decision support for... ...control, and closeout documentation tracking. The PE installs and operates the Project Engineer Standard Operating System (PE SOS) and...Full timeTemporary workInternshipWork at officeDay shift
- ...for you! We currently have an opportunity for a Automation Engineer to join our team located in Louisville, KY. Responsibilities... ..., reliability, and performance across our production and operational processes. The ideal candidate has a strong foundation in controls...Local areaRemote workRelocation
$91.48k
...general direction, creates and signs off on basic to highly complex engineering designs involving site layout development, site grading and... ..., with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith Inc. and its...Work experience placementH1bLocal area$95k - $105k
...Home District/Group: Kiewit Industrial District Department: Field Operations Market: Industrial Employment Type: Full Time Position Overview As an Electrical Construction Field Engineer, you will be the primary electrical engineering lead on the EPC...Daily paidFull timeContract workFor subcontractorWork at officeRelocationRelocation packageWeekend work$7.25 per hour
...Requirements First (Day) Job Description Job Description: The Electrical Controls Engineer role supports existing equipment; diagnose, repair or prevent improperly operating systems and equipment to make it perform the tasks it was designed to do efficiently....Hourly payFull timeWork experience placementFor subcontractorWork at officeLocal areaRemote workWorldwideShift work- ...Electrical Controls Engineer The Electrical Controls Engineer supports the safe, reliable, and efficient operation of the Kentucky facility through the design, implementation, maintenance, and continuous improvement of process control systems, automation technologies...For contractors
$130k - $150k
...Job Title: Electrical Controls Engineer Job Description The Electrical Controls Engineer designs, programs, and documents... ...CNC motion control, including CNC axis programming and machine operation. Proficiency with AutoCAD Electrical for creating electrical...Permanent employmentTemporary workWork at officeMonday to Friday- ...GE Appliances, a Haier company, is seeking a Senior Controls Engineer to lead the development and implementation of advanced automation... ...teams in design, lean, quality, EHS, procurement, and operations to support new product introductions. Provide control systems...Flexible hoursShift workDay shift
$115k - $155k
...Ready to Power a Smarter World with us? The Senior Controls Engineer serves as the technical lead for advanced microgrid control system... ...through system development, commissioning, and ongoing operational support-while balancing hands-on technical execution with process...Temporary workWork experience placementRemote workFlexible hours$140k - $161k
...Senior Automation Engineer The Senior Automation Engineer will drive the planning, vision, and execution of the automation strategy... ...with key stakeholders in design, quality, supply chain, and operations to drive automation efforts Lead, guide, develop and enhance...$43.27 - $45.67 per hour
...Job Title: Quality Engineer Job Description This Quality Engineer role focuses on leading customer-facing quality activities for an automotive manufacturing operation that produces interior components such as carpet and felt. You will serve as the primary contact...Contract workTemporary work- ...Description A growing plastics manufacturer is seeking a Quality Engineer - Plastic Injection Molding to own technical quality... ...would like to learn more about Manufacturing, Production, or Operations opportunities, contact David McKnight with gpac at 608-514-981...
- ...Systems Process Engineer Louisville, Kentucky, United States This role is a combination of Onsite and Remote work option! Summary... ...provides support and enhancements to existing and new operations systems to ensure projects are aligned with the corporate strategy...Remote work
- ...Interested in joining us on our journey? The Advanced Quality Engineer (AQE) owns the quality initiatives on a new part, or New... ...implementing Lean process improvements in high volume manufacturing operations. Six Sigma Green Belt or higher certification proficient...Work at officeFlexible hoursWeekend workDay shift
- ...Configuration Documentation Engineer At Levata, we believe in making your journey with us seamless, impactful, and filled with opportunities... ...Engineering team and works closely with Configuration Operations to help technicians successfully execute customer-specific...Work at officeLocal areaImmediate start
$82k
...company that makes a difference? We are looking for a S ystem Engineer II to join our team! Onco360 Pharmacy is a unique oncology... ...for the effective provisioning, installation, configuration, operation, and maintenance of systems hardware, software, and related infrastructure...Temporary workWork experience placementWork at officeImmediate start- ...Purpose The Project Engineer is a key team member whose primary responsibility is to support the construction activities of the project... ...establishing clear lines of communication between customers, operations, and staff. Job Responsibilities Onboarding new jobs:...For subcontractorWork at office
- ...address customer needs through the delivery of cost effective engineered-to-order solutions, including project management, project estimation... ...and Division leadership. Maintain positive relations with all operating groups, especially Sales. Support and promote engineering...For subcontractorWork at office
- ...Project Engineer Job Locations US-KY-LOUISVILLE | US-IN-NEW ALBANY Requisition ID 2026-61759 # of Openings... ...renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture...Temporary workFor contractorsWork experience placementFor subcontractorWork at officeLocal areaFlexible hours
- ...generous benefits package. Ulliman Schutte is seeking Project Engineers in the Louisville, KY area who have a strong desire to learn,... ...Daily Life Planning and execution of day-to-day project operations. Like to be outside and not stuck behind a desk all day? You'll...Full timeFor subcontractorInternshipRelocation
- ...being comfortable is frowned upon, then you might be the Project Engineer we are looking for! At DF&I our Mission is to set the... ..., and TEAMWORK to design systems that make our customers' operations more efficient, reliable, and future-ready. Our vision is...Full timeContract workFor contractorsSeasonal workWork at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Operating Engineer. Be the first to apply!

