Rail Loader/Unloader- Part Time/Casuals

divh2Rail Loader/Unloader- Part Time/Casuals/h2p1484 East Pearce Boulevard, Wentzville, MO, USA/pp27.00 per hour Weekly pay!/ppHourly/ppPart Time/ppAWCT is hiring part-time Rail Loader/Unloader Casuals for our Wentzville VDC location. Please apply fast for this position!/ph3Summary/h3pThis position is to prepare railcars for loading and offloading, disengaging vehicles from railcars, driving vehicles off railcars, and preparing railcars for transportation according to manufacturer manuals and American Association of Railroad standards. This is a general overview of the requirements of the position, not an all-inclusive list of activities. This job description is continuously evolving and may change without notice. Safely driving vehicles onto or off railcars wearing PPE, securing vehicles to railcars according to manufacturer and American Association of Railroad standards./ph3Essential Duties and Tasks/h3ulliDrive vehicles to and from specified locations in the yard and on/off rail cars./liliMake certain all vehicles are parked in proper locations and bayed correctly./liliUnderstand and apply all AWCT, customer, AAR, safety, and quality standards/policies./liliFollow all safety guidelines to guarantee the job is done in a safe manner./liliIdentify vehicles and insert documentation or scan VINs as required./liliInform Managers of any issues that could affect production, safety, or quality standards./liliLog/scan processed work into computer programs or tracking systems as required./liliRead and match VIN numbers (including VIN plate) quickly and accurately to ensure movement of proper vehicles./liliRead, compare, and understand work orders, repair orders, purchase orders, purge sheets, and other documents to complete work./liliVisually verify and inspect vehicles for damage prior to breaking chocks off any vehicle before starting to unload; notify supervisor of the damage immediately./liliReport missed bayed unit to supervisor or manager immediately./liliOpen or close railcar doors./liliRaise and lower railcar decks./liliLift, set and pin bridge plates and uninstall bridge plates as required./liliResponsible for junction spacing to ARR standards using proper equipment./liliSecure/unsecure customer vehicles to railcars using approved chocks and tie-downs as required; store any additional chocks and tie-downs left on the deck(s)./liliOperate and set buck ramps and stationery loading/unloading ramps./liliKeep work areas, vans, appropriate work attire, etc. clean and neat/liliNotify supervision of any workplace hazards or unsafe conditions immediately upon discovery./liliAttend monthly safety meetings./liliReport accidents and injuries immediately and follow up with the completion of the appropriate forms./liliOther duties as assigned./li/ulh3Minimum Requirements/h3ulliAbility to adhere to strict production, safety, and quality standards without variance/liliAbility to climb ladders and work at a height approximately 15-20 feet above the ground/liliAbility to lift 55 pounds overhead frequently/liliAbility to push, pull or carry up to 75 pounds/liliAbility to work outdoors, 100% of the time, in all weather conditions (often extreme) for extended periods/liliAbility to stand, walk and work in confined spaces for extended periods of time for up to a 10-12-hour shift (sometimes split shift)./liliAbility to get in and out of vehicle drivers door with minimal door opening clearance/liliAbility to use company-provided technological equipment to assist in job duties/liliAbility to function effectively under pressure as crews work together on production standards to complete work safely and timely without incident/liliAbility to verbally communicate with others effectively; work as a team with good interpersonal skills/liliAbility to judge distances/liliMust have the ability to maintain a good sense of balance/liliAbility to climb up and down railcar ladders at a 90-degree angle multiple times per shift while maintaining 3 points of contact for safety./liliAbility to pass Drivers Safety Test, Rail Safety Test and Buck Ramp quiz with 80% or higher/liliAbility to read and match numbers quickly and accurately/liliAbility to differentiate between colors for vehicle identification/liliAbility to read and understand location cards and work orders/liliAbility to read, understand and interpret SDS manuals/liliAbility to write, read, and comprehend basic English/liliAbility to drive standard and automatic automobiles/liliAbility to follow directions, both written and verbal/liliKnowledge of the use of hand tools (i.e., wrenches, screw drivers, ratchets, etc.)/liliMust have a valid drivers license; good driving record with the ability to maintain the same/liliMust pass AWCT pre-placement background clearances including pre-employment drug screening, HPE/POET physical demand testing/liliMust be able to obtain and maintain e-RAILSAFE/e-Verifile clearances as required by the AWCT customer/liliHigh School Diploma and/or GED/liliRegular attendance in all weather conditions/liliGood visual and auditory ability/liliMaintain positive behaviors and conduct in the workplace while acting and communicating with others, customers, vendors, co-workers, and management./li/ulpThe above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position./ppAWCT is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status, disability, or any other protected class with respect to employment opportunities./p/div