Machinist Trainee
NTM Inc
Produce tools, gauges and machined parts to established quality standards. Minimum Qualifications Strong mechanical aptitude and problem-solving capabilities Basic Computer Skills Additional Desirable Qualifications Prefer 1-2 years manufacturing experience Ability to work with geometric dimensioning and tight tolerances Flexibility to work overtime on occasion Team oriented employee Self-motivated and can work effectively under minimum supervision Essential Functions Interpret routers, work orders, and Bill of Materials Learn and operate machine shop equipment as needed. Keep machines properly lubricated and maintained and work area in a clean and orderly condition. Observe all established safety rules and procedures and report all unsafe conditions immediately. Specific Requirements of the Position Physical Requirements: Sitting, standing and moving about depending on specific operation. Reaching, handling, and manual dexterity to assemble, operate, adjust and inspect. Occasional bending, stooping, and kneeling. Frequent lifting, pushing and manipulating of objects weighing 10 pounds or more, with occasional lifting up to and over 50 pounds (assistance available for heavy lifting). Mental Requirements: High attentiveness and regard to detail to inspect parts and to ensure safety. Reading and basic math comprehension to understand and interpret quality information (SPC, charts, graphs, etc.). Writing notes, etc. and reading comprehension of blue prints. Interact daily with work teams. Equipment Used: Conventional lathes, mills and grinders, drill presses, sanders, band saws, and other machine tools in the Machine Shop. Inspection equipment such as optical comparator, flutter-gauge, laser micrometer, digital height gauge, gauge blocks, plug gauge, electronic internal and thread gauge, sine plate, shop computers etc. Working Environment: Majority of work is spent on the manufacturing floor subject to continual exposure to noise/vibration, dust and dirt, mechanical equipment hazards and moving equipment such as fork trucks. Occasional overtime offered to meet business needs. Working with and around others as a part of formal and informal work teams. Support available through supervisor or other associates for problem-solving and heavy lifting. NTM considers qualified applicants for employment without regard to any status protected by applicable federal, state or local law. Applicants who require an accommodation during the application or interview process may contact an NTM management representative for assistance. #J-18808-Ljbffr
$36 per hour
...Description Job Description Career opportunities for skilled Machinists (hiring pay up to $36/hour with opportunity to earn future... ...and/or training less experienced Machinists, Machinist Trainees, and Machine Operators. Adherence to safety procedures/guidelines...TraineeshipTemporary workWork experience placementLocal areaRelocation packageDay shiftAfternoon shift- Contact prospective clients and schedule virtual benefits reviews. Meet with clients to review existing coverage and understand their family’s needs, priorities, and budget. Explain available benefits, policy features, costs, and coverage limitations clearly. Recommend...TraineeshipRemote jobFull time
$25 - $40 per hour
...CNC Machinist - Mori Seiki Multi-Axis Setup Operator Precision. Technology. Aerospace. Build Your Career Here. Are you an experienced CNC Machinist who thrives in a high-precision manufacturing environment? Join a growing team producing critical components for...SuggestedWeekly payContract workTemporary workMonday to FridayNight shiftWeekend workDay shift- ...Job Description Job Description Aerospace machinist positions, particularly for horizontal milling centers (HMC), need a blend of technical skills and practical knowledge. Key Skills for Aerospace Machinists Precision Machining — Mastery of machining techniques...SuggestedAfternoon shift
- ...Job Description Job Description These are the main skills/competencies required: - Proven experience as a machinist or in a similar role within a manufacturing environment. Strong competency with mills, lathes, and other machine shop equipment; both manual and...Suggested
$30 - $38 per hour
We build leaders in precision. ARCH recognizes and rewards our employees' contributions with a competitive total rewards package. This position offers: ~ Competitive base rate -$30 to $38 per hour, depending on experience. ~ Medical/Prescription Drug/Dental/Vision...Hourly payPermanent employmentContract workTemporary workRelocation packageShift workDay shift- ...divisions, including four in Minnesota—Blaine, Long Prairie, Montevideo, and Wyoming—and one in Chihuahua, Mexico. Summary Skilled CNC machinist (Mills) that can perform standard set‑ups and some complex set‑ups. Operates and adjusts CNC machines to perform standard and...Permanent employmentContract workWork at office
$25.5 - $33.74 per hour
...We are open and honest with one another Integrity We do the right things and do things right The primary purpose the Machinist is to set up, operate, and maintain CNC equipment to manufacture precision parts. Accountabilities & Responsibilities: • Adheres...Hourly payImmediate startShift workWeekend work- ...Machinist Class AAs a Machinist Class A here at Honeywell, you will play a crucial role in the production process.Key ResponsibilitiesDiversified work to tear down, rebuild and adjust any type of machine regardless of make or model. Scrape ways and bearings, line levels...Permanent employmentTemporary workFlexible hoursDay shift
$22 - $35 per hour
...Machinist IINiron Magnetics is commercializing the first new permanent magnetic material in decades—a breakthrough Iron Nitride technology that eliminates rare earths, strengthens supply chains, and drives a more sustainable future. At Niron, we're not improving what exists...Hourly payPermanent employmentWork at officeImmediate start$21 - $22 per hour
...Machinist InternAt Kurt Machining our employee experience and ability to solve complex manufacturing challenges set us apart. We provide precision CNC-machining services utilizing state-of-the-art manufacturing, quality, and automation technology. Since 1946 we have delivered...InternshipMonday to FridayFlexible hoursDay shift$39.36 per hour
...Turning Machinist OpportunityAdvance your machining career in a state-of-the-art, climate-controlled facility in Coon Rapids, MN! Twin City Staffing is hiring a turning machinist for 1st or 2nd shift direct-hire opportunities. In this role, you will set up and operate...Temporary workShift workDay shiftAfternoon shift$25 - $42 per hour
...overseas are offered private health insurance, life insurance, and an employee assistance program (EAP). POSITION SUMMARY The Machinist is responsible for maintaining Anderson Dahlen Quality standards on one or more of our CNC vertical, horizontal Mills, and Bridge...Hourly payContract workOverseasShift workNight shiftWeekend workDay shift$23 - $26 per hour
...Machinist 2nd Shift Machinist 2nd Shift Plymouth, MN 55447 $23.00-26.00/hr FullTime September 24, 2026 48312763 Job Description About the Opportunity: Job Title: Machinist Pay Rate: $23.00-$26.00/Hour Location: Plymouth, MN Schedule: 2nd Shift, Monday-Thursday 3PM-1:30...Full timeTemporary workAfternoon shift$31.25 per hour
...Machinist B - 3rd ShiftIn the Motion Systems Group and the Hydraulic Actuator Division, we play a pivotal role in applications that change our world. We are in almost everything that moves. With our wide range of technologies, we help our customers solve their most complex...Hourly payPermanent employmentTemporary workImmediate startNight shift$25 - $46 per hour
...Machinist Position at Applied AdhesivesAbout Applied Adhesives: We have you covered. Nobody knows more about adhesives than Applied Adhesives. We are passionate about solving complex challenges with innovative adhesive products and offerings. Applied is the industry leader...Live inRelocation- ...GENERAL SUMMARY The Machinist is responsible for fabrication and layout on a variety of parts or products involving close tolerances. Must set up and operate all machine shop machines to cut, bend, machine or form parts. ESSENTIAL FUNCTIONS Responsible for quality of work...Afternoon shift
$24 - $28 per hour
...Machinist - 2nd ShiftElectric Machinery Company, a division of WEG Electric Corp. Minneapolis, MinnesotaPrimary Objective of Position:A Machinist is responsible for the setup and operation of CNC and manual machining equipment. A Machinist works within close tolerance...Hourly payFull timeTemporary workMonday to FridayAfternoon shift$21 - $22 per hour
..., semiconductor, oil and energy. Take a virtual tour of our Machining Division by clicking here! Job Summary The Machinist Intern position allows students pursuing a career in the manufacturing industry the opportunity to gain experience while completing...InternshipMonday to FridayFlexible hoursShift workDay shift$28 - $36 per hour
...Now hiring for a Tool Room Machinist Location: Minneapolis, MN Pay Rate: $28.00 - $36.00 per hour Schedule: ~1st Shift: Monday-Friday, 7:00 AM-3:30 PM ~2nd Shift: Monday-Friday, 3:30 PM-12:00 AM ~ Overtime may be required during...Hourly payWeekly payImmediate startMonday to FridayShift workDay shiftAfternoon shift$38 - $40 per hour
...Master Precision. Machine the Exceptional as a Swiss Machinist Location: Bloomington, MN | Payrate : $38 - $40/hour | Both 1st and 2nd shifts available PDS Tech Commercial is partnering with a leader in the manufacturing industry to hire accomplished Swiss Machinists...Hourly payLocal areaShift workDay shiftAfternoon shift$25 - $32 per hour
YOUR BENEFITS Our benefit package includes: ~ Starting at 4 weeks PTO per year ~401(k) and a company match ~ Profit Sharing Medical + Company HSA contribution ~ Wellness Program ~ Dental ~ Vision ~ Life Insurance ~ Disability ~6 Weeks Parental...Work experience placementWork at officeFlexible hoursShift work- ...Aerotek - JobID: JP-005851982 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines; Inspect, trim, test, fixture, assemble, and package products; Perform other duties as assigned...Hiring Immediately...Immediate start
- ...Management Trainee Opportunity We'll help your talents branch out. Do you want to learn how to inspire and lead while getting valuable, hands-on experience across customer service, sales & marketing, finance and operations? If the answer’s a resounding yes, then a...Traineeship
$2,500 per month
...right things and do things right NOW OFFERING SIGN-ON BONUSES FOR SWISS POSITIONS! Machine Operators will receive $2,500 and Machinists will receive $5,000! The primary purpose the Machinist is to set up, operate, and maintain CNC equipment to manufacture precision...Immediate startRelocation packageShift workWeekend work$22 - $25 per hour
Job Description Job Description Denture Set‑Up Technician Udell Dental Lab St. Louis Park, Minnesota Pay: $22.00–$25.00 per hour Job Type: Full-Time Experience Level: 5+ years required Join a Growing, Quality‑Driven Dental Laboratory Udell...Hourly payFull time$19 - $40 per hour
...Machinist Job Location: Fridley MN Pay: $19/hr - $40/hr DOE Shift: M-F 6:00am - 2:30pm Overview Our company is a global provider of thermal solutions, temperature sensing and control solutions, and flex circuit solutions for medical, aerospace, defense...Hourly payFull timeTemporary workFlexible hoursShift work- ...coursework in electrical, mechanical, HVAC, or industrial maintenance. Previous experience in a maintenance or technical role (even as a trainee or apprentice). Basic understanding of electrical circuits, plumbing, HVAC systems, or mechanical systems. Familiarity with...TraineeshipHourly payApprenticeship
$27 - $40 per hour
...Manual Machinist PositionJoin a well-established machining company in Minneapolis, MN as a manual machinist! This position offers steady hours, a clean and organized shop, and the opportunity to work with a wide variety of manual machines while producing high-quality parts...Hourly payMonday to Friday- ...recently certified as a "Great Place to Work" for the fifth year in a row? If so, please read on... L&S is looking for a Manual Machinist for the 1st shift. We are seeking a self-motivated team member that has strong verbal and written communication skills, excellent...Weekend workDay shiftAfternoon shiftWeekday work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Machinist Trainee. Be the first to apply!
- machinist Minneapolis, MN
- production machinist Minneapolis, MN
- lathe machinist Minneapolis, MN
- maintenance machinist Minneapolis, MN
- sales trainee Minneapolis, MN
- store management trainee Minneapolis, MN
- insurance sales trainee Minneapolis, MN
- clinical research trainee Minneapolis, MN
- international management trainee Minneapolis, MN
- graduate trainee Minneapolis, MN



