Electrical Technician

Electrical Technician

This position will be filled at the Technician I, II, or III level. The level and salary offered will be dependent upon education and experience.

Open until filled with a best consideration date of July 23, 2026. This posting may close without notice.

The hiring salary for Electrical Technician I is $47,573.57.

The hiring salary for Electrical Technician II is $53,453.40.

The hiring salary for Electrical Technician III is $60,060.20.

Charles County Government is seeking an experienced Electrical Technician to perform a variety of tasks associated with the construction, installation, maintenance, repair, rehabilitation, alteration, and replacement of primary and backup electrical assets such as equipment, systems, and structures. Technician will address and resolve routine preventive maintenance requirements, corrective maintenance issues, and work requests submitted by departments and agencies in a safe, efficient, and quality manner with a strong focus on customer service and in compliance with applicable codes, standards, and regulations.

Description of Career Ladder Series

Electrical Technician I to Electrical Technician II

- Two years of satisfactory conduct and performance (this includes a satisfactory rating on every category for the annual performance evaluations) as an Electrical Technician I.

- Written recommendation of the Electrical Superintendent.

- Demonstrates technical proficiency at the journeyman level.

- Completed 100 hours of training related to the Electrical trade during the same two-year employment period.

Electrical Technician II to Electrical Technician III

- Two years of satisfactory conduct and performance (this includes a satisfactory rating on every category for the annual performance evaluations) as an Electrical Technician II.

- Written recommendation of the Electrical Superintendent.

- Demonstrates technical proficiency and has obtained a journeyman's license issued by the State of Maryland Board of Electrical Examiners.

- Completed 150 hours of training related to the electrical trade during the same two-year employment period.

Electrical Technician III

Must have and maintain a Journeyman's license issued by the State of Maryland Board of Electrical Examiners. Senior-level of the career ladder series for Electrical Technicians. An Electrical Technician III may apply for a supervisory position.

Essential Job Functions

• Review work orders, plans, specifications, or instructions and study technical drawings and manuals to understand connections and determine work activities. Identify materials and tools required and estimate time needed to complete the work. Purchase or order materials in accordance with county procurement policies and distribute to the appropriate location.
• Perform mandatory inspections and routine preventive maintenance to maximize the safety, productivity, and life of the assets. Examine the assets for damage, defects, or wear and to determine if additional safety or repair work is required. Document and inform supervisor of other recommended repairs.
• Use testing instruments, visual observation, or other specialized skills and tools to inspect and identify problems, assess operational efficiency, troubleshoot, or recreate situations, and verify customer complaints before work is initiated.
• Diagnose the cause and related symptoms of any malfunction. Advise supervisor immediately if the continued operation of the asset could be hazardous.
• Adjust, maintain, and repair assets as directed. Install parts and accessories or perform repairs in accordance with the manufacturer's guidelines.
• Conduct quality control and assurance procedures to confirm the repair is complete and the asset operates safely and reliably.
• Clear, prepare, and clean work sites, removing any debris in an appropriate manner. May need to temporarily or permanently remove flooring, ceiling tiles, or other coverings to perform or complete work.
• May lead or assist with the construct, install, repair, rehabilitate, alter, and replace electrical wiring, equipment, systems, and structures. Measure, cut, strip, splice, bend, and solder wire or cable and thread through conduit inside walls or other concealed areas. Fasten appropriate electrical box for switches or outlets.
• Connect wires to control panels, circuit breakers, transformers, or other components. Conduct signal quality and connectivity tests.
• Test wiring and control systems to include but not be limited to lighting, security alarm, smoke detection, and voice-data-video using testing instruments such as ohmmeters and voltmeters to ensure compatibility and safety.
• Check asset for signs of moisture; excessive heat, noise, or vibration; and unusual odors. Inspect wiring, wiring connections, and fuse blocks for looseness and evidence of short circuiting, overheating, or charring. Tighten loose connections and make any other necessary adjustments.
• Measure velocity, horsepower, revolutions per minute, amperage, circuity, and voltage to confirm results are within required range or below maximum limit.
• Relocate computer systems and network drops. Install or move wires or cables as needed.
• Document work performed in a clear, detailed but concise and timely manner. Documentation should reflect work performed by the employee or contractor and include the time, parts, and supplies used. Close work order and revise plans, specifications, and asset records as needed.
• Responsible for the safety and cleanliness of the work area, as well as safeguarding assets. Control traffic passing near, in, or around work areas. Signal equipment operators to facilitate alignment, movement, or adjustment of materials and equipment.
• Apply deductive and inductive reasoning and use checklists, technical manuals, or drawings and experience to estimate and compare the short-term and long-term costs and benefits of potential solutions.
• Evaluate strengths and weaknesses of options, determine the best solution, and plan the appropriate work procedures. Consult with coworkers, customers, and vendors to coordinate and execute work activities.
• Understand and review the implications of new information related to a solution for both current and future problem solving and decision making.
• Perform preliminary review of packing slips or invoices for accuracy and sign or initial to confirm receipt of listed items or verify the hours and work reported as complete.
• Cooperate with employees in other areas such as maintenance; heating, ventilation, and air conditioning; or custodial to resolve potential issues and meet deadlines with minimal disruption to customers, tenants, and visitors. Provide emergency or relief assistance to other areas as and when needed.
• May collaborate with supervisory personnel to perform the planning, monitoring, and reviewing of the work performed by contractors to ensure compliance with contract agreements and specifications.
• May respond to emergencies, transporting any needed tools and parts, and assess the feasibility of performing the repair. Assure adequate precautions are taken until the asset can be repaired or operate safely.
• Support supervisory personnel by obtaining or estimating costs associated with the purchase, installation, repair, and demolition of assets.
• May support supervisory personnel by training, guiding, and advising less experienced technicians and providing feedback on their performance.
• May lead or aide with the design and evaluation of assets to include routing, placement, type size, gauge, balance, load, continuity, and safe operations.
• Provide customer support and education to provide information on the safe and proper use of assets. Recommend energy conservation techniques.
• Participate or lead meetings with customers, contractors, and coworkers to assess needs or concerns. Attend weekly safety meetings.
• Perform other related job duties as assigned.

Qualifications, Knowledge, Skills, and Abilities

Education and Experience:

High school diploma or an acceptable equivalency diploma (GED), Completion of a Maryland Apprenticeship and Training Program or similar program related to electrical trade is preferred for all Electrical Technicians plus:

Electrical Technician I: Two years of experience with the construction, installation, maintenance, repair, rehabilitation, alteration, and replacement of electrical equipment, systems, and structures or an equivalent combination of education, experience and training.

Electrical Technician II: Four years of progressively responsible experience, performing at the journeyman-level, with the construction, installation, maintenance, repair, rehabilitation, alteration, and replacement of electrical equipment, systems, and structures or an equivalent combination of education, experience and training. The level of performance needed includes but not limited to: completing tasks with little to no supervision, solving non-routine problems, independent technical competence, performs advanced troubleshooting and diagnostics, complies with the electrical code, conducts preventive maintenance, independently handles emergency repairs and installs specialized systems.

Electrical Technician III: Journeyman license issued by the State of Maryland Board of Electrical Examiners. Seven years of progressively responsible experience with the construction, installation, maintenance, repair, rehabilitation, alteration, and replacement of electrical equipment, systems, and structures. or an equivalent combination of education, experience and training.

Licenses or Certifications:

Must possess a valid driver's license.

Department of Transportation (DOT) physical examination conducted by a licensed