Welder - Manufacturing
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 11 hours ago
Similar jobs that could be interesting for youBased on the Welder - Manufacturing in Jamul, CA vacancy
$35.36 - $38.71 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications...SuggestedHourly payLocal areaFlexible hoursShift work$28.8 - $43.2 per hour
Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...SuggestedRelocation$26.26 - $32.53 per hour
...Epsilon Systems Solutions, Inc. is seeking a full time Graving Dock Pipefitter Welder II in San Diego, CA. Summary: Performs various welding processes to repair, for fabricating, installing, and maintaining piping systems and welded structures foundations and...SuggestedHourly payFull timeLocal areaNight shift$61.36k - $93.66k
...What's it like working for an innovative company that takes on some of the world's most important challenges? Rewarding. Being a welder at BAE Systems means taking pride in the work you do in helping in the repair and modernization of the U.S. Navy vessels and knowing...SuggestedPermanent employmentFull timeWork experience placementLocal areaNight shift- Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...SuggestedRelocation
- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks...Hourly payLocal areaFlexible hoursShift work$67.69k - $80k
...Modernization (PM) trades teams provide expert solutions on submarine alterations and installations for fleet modernization. The selected Welder** candidate will support PM, working closely with our skilled trades teams, on active class surface ships, submarines, and shore-...Hourly payDaily paidFull timeWork experience placementLocal areaWorldwide$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance required Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other ...Hourly payLocal areaFlexible hoursShift work$20 - $22 per hour
Responsive RecruiterBenefits: 401(k), 401(k) matching, opportunity for advancement, training & development.Job Summary:Support other personnel as required, including cutting, grinding, cleaning, tacking, etc.Lifting 50lb.General power tool knowledge (angle grinders, drills...Monday to FridayShift work$28 - $32 per hour
...and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's... ...techniques on a variety of metals. Acts as mentor for junior Welders. May work with engineering to resolve problems and develop new...Hourly payDay shift$25 - $30 per hour
...Welder/Fitter (1st Shift)Company: TriMas Company LLCPrimary Location: 1451 N Johnson Ave, El Cajon, CA 92020 USAWorkplace Type: On-siteEmployment Type: Hourly | Full-TimeFunction: Manufacturing Production / DistributionEqual Opportunity Employer Minorities/Women/Veterans...Hourly payTemporary workFlexible hoursDay shift$33.62 - $36.97 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Installs and maintains ships' piping systems such as steam, heat and power, hot water, hydraulic, air pressure, and oil lines following blueprints, layouts and work...Hourly payLocal areaFlexible hoursShift work- ...Construction Laborer/Welder (San Diego) A San Diego based Construction Company with operations throughout Southern California currently has openings for Full Time CONSTRUCTION LABORER/WELDER, in its Lakeside, California Division. Job Duties: The duties for this...Full time
- Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleCasual workWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- ...Training & development Are you a highly skilled and experienced welder/fabricator with a knack for leadership? Do you thrive in a... ...with CNC cutting machines. * Familiarity with lean manufacturing principles. Benefits: * Competitive salary based on experience...
$20 - $25 per hour
...putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.6bn in 2025....Temporary workNight shift$28 - $32 per hour
Welder I - Certified - 1st Shift - Repair Solutions Date: May 9, 2026 Location:El Cajon, CA, US Company: GKN... ...protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft...Hourly payDay shift$28 - $32 per hour
Welder - 2nd Shift Date: Jul 9, 2026 Location:El Cajon, CA, US Company: GKN Aerospace Careers Fantastic... ...and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s...Hourly payAfternoon shift$25 - $40 per hour
Job Description Job Description Benefits: ~401(k) ~401(k) matching ~ Competitive salary ~ Opportunity for advancement ~ Training & development Main Activities: Layout - field layout. Rigging. Experience working with design and erection drawings...Hourly pay$20 - $25 per hour
...putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023....Temporary workDay shift- Job Description Job Description The Field Ironworker Foreman position is a full-time field position based out of Spring Valley, CA. The day-to-day responsibilities include working with a crew of 2-4 to install structural and miscellaneous steel according to project...Full timeApprenticeship
$22 - $25 per hour
...other duties, tasks and responsibilities as assigned Job Qualifications High school diploma or GED 3+ years of experience in manufacturing Ability to read blueprints, schematics and diagrams Ability to be certified to operate forklift Must be a U.S. Citizen or Green...Hourly payTemporary workNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder - Manufacturing. Be the first to apply!
Related searches
- manufacturing lead Jamul, CA
- industrial manufacturing Jamul, CA
- manufacturing team lead Jamul, CA
- electronic assembly manufacturing Jamul, CA
- medical manufacturing Jamul, CA
- manufacturing Jamul, CA
- manufacturing production Jamul, CA
- custom fabrication Jamul, CA
- general manufacturing Jamul, CA
- quality manufacturing Jamul, CA


