Brake Press Operator
$25.5 - $30.5 per hourAdecco USA
Press Brake Operator
Pay: $25.50 - $30.50 per hour, depending on experience
Shift Availability
1st Shift
- Monday through Friday, 5:00 AM - 1:30 PM
- Must be available to work Saturdays as needed
2nd Shift
- Monday through Thursday
- Must be available to work Fridays as needed
Job Summary
The Press Brake Operator is an advanced skilled position responsible for the setup, programming, and operation of CNC-controlled forming, cutting, and rolling equipment. This role requires the ability to independently perform complex machine setups, programming, troubleshooting, and production operations while maintaining quality and safety standards.
The Press Brake Operator may also assist with machine setup, operation, and training of less experienced operators. This position works under limited supervision, receives specific work assignments, and resolves most production issues with minimal supervisory assistance. All work is subject to first-piece and final inspections to ensure quality standards are met while minimizing material waste and labor costs.
The successful candidate is expected to follow departmental 6S standards and support the company's continuous improvement and Six Sigma initiatives.
Essential Duties & Responsibilities
Other duties may be assigned as necessary.
- Review job and production orders and interpret prints, blueprints, and drawings to determine work requirements.
- Perform bending and forming operations using standard and custom punches.
- Utilize CNC controls to input and modify machine programs.
- Adjust ram and back gauge locations according to blueprints and process control instructions.
- Measure and inspect parts using tape measures, calipers, gauges, and other precision measuring instruments.
- Perform complex programming utilizing all available press brake features.
- Produce quality parts for assembly operations.
- Meet customer specifications, quality expectations, and delivery requirements.
- Program CNC equipment to manufacture new parts according to specifications.
- Conduct spot inspections and quality checks throughout production.
- Configure bend allowances for sheet metal and plate steel, including stainless steel, aluminum, and carbon steel.
- Ensure machines are properly calibrated, maintained, and cleaned.
- Perform routine and minor maintenance according to established procedures.
- Prepare and clean product surfaces as required for fabrication processes.
- Monitor machine performance and production output to ensure quality and efficiency.
- Maintain a clean and organized work area, including fabrication equipment and tools.
- Follow all safety policies and procedures at all times.
- Ensure all work complies with ISO requirements and company quality standards.
- Assist in training and supporting less experienced operators when needed.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Qualifications
Knowledge, Skills & Abilities
- Strong knowledge of metal fabrication and forming practices and processes.
- Experience operating and setting up press brakes and ring rollers.
- Ability to read and interpret blueprints, shop drawings, and job specifications.
- Ability to perform intermediate mathematical calculations related to fabrication work.
- Knowledge of structural metals and material properties.
- Skilled in the use of fabrication tools and precision measuring instruments, including:
- Scales
- Protractors
- Fixed-angle gauges
- Radius gauges
- Knowledge of workplace safety practices and occupational hazards.
- Strong communication and teamwork skills.
- Ability to work independently and maintain high-quality standards.
Experience
- Minimum of 3 years of press brake or related fabrication machine experience required.
Education
- Formal apprenticeship training preferred but not required.
Certifications
- Forklift Operator Certification preferred.
Physical Requirements
- Lift up to 100 lbs. occasionally.
- Lift up to 50 lbs. frequently.
- Move materials up to 250 lbs. with assistance.
- Frequent standing, walking, kneeling, crouching, stooping, squatting, and twisting.
- Occasional climbing and sitting.
- Close vision, distance vision, peripheral vision, and depth perception required.
Work Environment
Work is performed in a metal fabrication, welding, and assembly shop environment.
Employees may be exposed to:
- Hot materials and surfaces
- Welding glare and flashing
- Sparks, metal chips, and flying debris
- Fumes and airborne particles
- Chemicals and cleaning agents
- Moving machinery and mechanical equipment
- Wet or humid conditions
- Outdoor weather conditions as required
- Noise levels at or above 85 dBA
Required Personal Protective Equipment (PPE)
- Safety glasses
- ANSI-approved safety shoes
- Gloves as needed
- Hearing protection
- Protective outerwear and additional PPE required by specific job sites
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
Equal Opportunity Employer/Veterans/Disabled
Military connected talent encouraged to apply
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
- The California Fair Chance Act
- Los Angeles City Fair Chance Ordinance
- Los Angeles County Fair Chance Ordinance for Employers
- San Francisco Fair Chance Ordinance
Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$25 per hour
...reliability are essential. Reporting to the Manufacturing Manager, the CNC Machinist is responsible for setting up, programming, operating, and maintaining CNC machinery to produce precision components in accordance with engineering drawings, specifications, and...SuggestedHourly payLocal areaShift work$20 - $24 per hour
...CNC OperatorAerotek is hiring immediately for 1st and 2nd shift CNC operators. Operators will be fully trained on tool change processes for machinery.Job Responsibilities:Operate CNC machines - mills and/or lathesPerform tool changes and offsetsLoad and unload machines...SuggestedContract workTemporary workImmediate startMonday to FridayMonday to ThursdayShift workNight shiftDay shiftAfternoon shift$30.02 - $43.43 per hour
...43.43/hr (includes 10% shift premium) + $2K Sign On Bonus 2nd Shift: 3:00 PM – 11:00 PM, Monday - Friday What You’ll Do Set up and operate CNC machines (lathes, mills, etc.) Read blueprints and perform precision measurements Use gauges and inspection tools Produce high-...SuggestedRelocation packageMonday to FridayShift workAfternoon shift- ...Description We are seeking experienced CNC Machinists and CNC Setup Technicians to join an established precision manufacturing operation in the Sturtevant, Wisconsin area. The ideal candidate has hands-on experience setting up, operating, and troubleshooting CNC...SuggestedFull time
$26 - $29 per hour
...Description Job Description Job Title: CNC Machinist Job Description We are seeking a skilled CNC Machinist to set up and operate CNC mills or lathes for short runs, typically no more than 25 parts. The ideal candidate will read blueprints to determine part...SuggestedWeekly payContract workTemporary workShift workDay shiftAfternoon shift$20 - $24 per hour
...Job Description Job Description Aerotek is hiring immediately for 1st and 2nd shift CNC operators. Set-up experience is not necessary. Operators will be fully trained on tool change processes for machinery. Job Responsibilities: Operate CNC machines - mills and...Weekly payContract workTemporary workImmediate startMonday to FridayMonday to ThursdayShift workNight shiftDay shiftAfternoon shift$20 - $25 per hour
...Job Description Job Description Aerotek is hiring immediately for 1st and 2nd shift CNC operators. Set-up experience is not necessary. Operators will be fully trained on tool change processes for machinery. Job Responsibilities: Operate CNC machines - mills and...Weekly payContract workTemporary workImmediate startMonday to FridayMonday to ThursdayShift workNight shiftDay shiftAfternoon shift$24 - $26 per hour
...Job Description Job Description Job Title: CNC Mill Operator Job Description This role focuses on operating CNC mills in a job shop environment to produce precision parts that fully comply with customer prints and specifications. You will set up and run CNC...Weekly payContract workTemporary work- Aerotek - - Responsibilities: Set up and operate CNC mills or lathes; Read blueprints for part specifications; Change tools and adjust programs; Inspect products with precision measuring tools; Perform preventative machinery maintenance
$30 - $34 per hour
...components that meet quality specifications. CNC Machinist Responsibilities Include But Are Not Limited To: Set up, program, and operate Haas CNC Vertical Mills and Lathes Perform complete machine setups, including tooling and workholding Create and modify CNC...Immediate startShift workAfternoon shift- ...We serve automotive, small-engine, furniture, and lighting/electrical markets, handling virtually all manufacturing and finishing operations in-house. Our focus is producing dependable tooling with short lead times and extending its useful life through refurbishment...ApprenticeshipLocal area
$20 - $24 per hour
...Aerotek is hiring immediately for 1st and 2nd shift CNC operators. Set-up experience is not necessary. Operators will be fully trained on tool change processes for machinery. Job Responsibilities: Operate CNC machines - mills and/or lathes Perform tool changes...Weekly payContract workTemporary workImmediate startMonday to FridayMonday to ThursdayShift workNight shiftDay shiftAfternoon shift$52k
...Press Brake OperatorThe Press Brake Operator will be part of a manufacturing cell team responsible for setting up and operating CNC brake press equipment to form metal components according to quality and production standards. This role offers opportunities for skill development...Permanent employmentMonday to FridayFlexible hoursShift workDay shift$30 - $35.5 per hour
...Job Description Job Description Job Title: CNC Haas Programmer and Operator Job Description This role combines CNC programming and hands-on operation in a machine and fabrication job shop. You will program, set up, and operate CNC lathes and mills, perform precise...Weekly payPermanent employmentTemporary workMonday to ThursdayShift workAfternoon shift- ...and engineering teams. Key Responsibilities Develop, create, and optimize CNC programs for milling and turning operations. Program and troubleshoot CNC machines using G-code, M-code, and CAD/CAM software. Design and improve machining...
$52k
...Job Description Job Description Job Title: Press Brake Operator Job Description The Press Brake Operator will be part of a manufacturing cell team responsible for setting up and operating CNC brake press equipment to form metal components according to quality and...Weekly payPermanent employmentMonday to FridayFlexible hoursShift workDay shift- ...Mechanic 1st Shift/7am- 3pm/ Mon.-Fri. Pay- Based on experience Responsible for keeping molding equipment efficient and operational through duty cycles. Essential duties and responsibilities include but are not limited to: Performs all preventative...Day shift
$22.5 per hour
...Job Description We are hiring a Press Brake Operator with at least 3 years of experience to join a growing manufacturing team in Kenosha, WI. This is a full-time, temp-to-hire opportunity for someone who takes pride in quality work and enjoys a hands-on production...Hourly payFull timeTemporary workMonday to FridayShift work- ...Job Description Job Description Job Summary: The Press Brake Operator is an advanced skilled position in the Company with specific responsibility for set-up and operation of CNC Controlled forming, cutting and rolling equipment. The Press brake operator may also be...ApprenticeshipAfternoon shift
- ...Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible...
- ...Summary The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include...Full timeMonday to FridayAfternoon shift
$30 - $40 per hour
CNC Machinist CNC Lathe Machinist needed in Kenosha, Wisconsin! Direct Hire! Our client is looking for an experienced CNC Lathe Machinist to add to their growing team! This employee will be responsible for the set up and programming of CNC Lathe machines according...Shift workNight shiftWeekend work$19 - $20 per hour
...Job Description Job Description Now Hiring – General Labor & CNC / Leveler Operator Location: Oak Creek, WI Schedule: Full-Time | 1st Shift | Monday–Friday Employment Service Connection, Inc. is hiring for two manufacturing positions in Oak Creek, WI....Full timeImmediate startMonday to FridayDay shift- ...expand their skills while helping create packaging found on store shelves across the country. Quad is seeking a Sheetfed Second Press Operator at our Franklin, WI location. We are seeking a candidate who are flexible and could work any of these shift options, as...Monday to FridayFlexible hoursShift work
$30 - $40 per hour
CNC Lathe Set Up Machinist needed in Kenosha, WI! Direct Hire! Our client is looking for an experienced CNC Lathe Set Machinist to add to their growing team! This employee will be responsible for the set up and programming of CNC Lathe machines according to specifications...Monday to FridayAfternoon shift- ...Aerotek - - Responsibilities: Set up and operate CNC mills or lathes for short runs; Read blueprints to determine part specifications; Change tools and make small program adjustments; Inspect parts with micrometers and calipers; Perform preventative maintenance on machinery
- ...CNC Programmer. 1st shift! You'll review drawings, put together material take-offs and run times for estimating, and support the operators on the shop floor when programs need troubleshooting.What you'll need:- 5+ years of CNC programming in a manufacturing or job shop...Day shift
$40 - $45 per hour
We are hiring a Metal Fabrication Machinist for a manufacturing operation in Waukesha, WI. This hands-on role involves preparing,... ...specifications. Operate equipment such as band saws, drill presses, milling machines, lathes, punch presses, and grinders. Read...Hourly payLocal areaShift work- ...work with the manufacturing team and use knowledge to braze copper, assemble components for commercial chiller (HVAC) assembly. Operations consist of brazing copper piping, assembling steel piping, insulating refrigerant lines, electrical panel building, wiring sensors...Temporary workWork experience placementWorldwideFlexible hours
$28 - $40 per hour
...have opportunities that match your current skill level and give you room to grow. Depending on your experience, you may start by operating established jobs or step directly into independent setups, troubleshooting, process improvement, and complex high-mix work. We’...ApprenticeshipRelocationRelocation packageShift workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Brake Press Operator. Be the first to apply!





