Retort Operator - QC Tech 1st shift /innovation
IPM Foods
Job Description
Job Description
The Quality Control Technician is responsible for conducting product testing on the production line and within the facility to ensure that all products meet established quality, safety, and specification standards. This role performs a combination of in process line checks, equipment calibrations, and facility wide quality monitoring activities to support continuous compliance.
QC Line Duties
●Obtain the specification sheet from the supervisor and verify accuracy of lot number, use by date, batch code and number, and weights before the run begins.
●Set up the printer, weight checker machine, and X ray machine at the start of each production run.
●Perform X ray and weight check tests every hour during production to verify product integrity and specification compliance.
●Prepare and enter production run information into the computer system accurately and in a timely manner.
●At the beginning of each run, collect the first two packages off the line for preoperational testing.
●Test product weight, temperature, salt content, volume, drain weight, and noodle weight (if required) every 15 minutes using two packages per test interval.
●Perform conductivity testing by collecting packages, checking drain weight, and verifying noodle weight (if required) every 15 minutes.
●Check seal integrity using pliers and measure the width of the seal area on each test interval sample.
●After the run is complete, print and verify all production data from the computer, save all information, and test the X ray and weight checker equipment for end of run validation.
●Clean the testing and work area thoroughly after production is complete.
Qualifications
●Prior experience in food manufacturing quality control or laboratory testing preferred.
●Ability to follow written specifications, measurement procedures, and standard operating procedures accurately.
●Strong attention to detail with a focus on accurate data collection and documentation.
●Basic computer skills for data entry and record management.
●Ability to use testing equipment including scales, thermometers, X ray machines, and conductivity meters.
●Knowledge of GMP and food safety requirements preferred.
Physical Requirements
●Ability to stand and move on the production floor for extended periods.
●Ability to lift and carry up to 40 lbs as needed for sample collection and testing activities.
●Ability to work in varying temperature conditions within a food manufacturing environment.
Work Environment
Work is performed in an active food manufacturing production environment. The Quality Control Technician is regularly exposed to production equipment, food products, cleaning chemicals, and varying temperatures. Strict compliance with all GMP, allergen control, food safety, and workplace safety requirements is mandatory at all times.
1st shift- Retort Operator The Retort Operator is responsible for controlling the retort system to cook... ...Collect samples for incubation and assist QC and the Loader Operator. Work... ...requirements is mandatory at all times. Shift schedule: 1st Shift 7:00 to 15:30 / 2nd Shift 15:00...Day shiftShift workAfternoon shift
- ...The Quality Utility supports the QA/QC department at NaturPak's Innovation Facility by providing flexible... ...coverage wherever needed throughout the shift Pull product samples and perform... ...immediately Perform pre-operational and post-operational sanitation inspections...SuggestedImmediate startFlexible hoursShift workAfternoon shift
- ...Description The Meat Processing Operator is responsible for the... ...products at NaturPak’s Innovation Facility in Janesville,... ...throughout the shift. ●Perform end-of-run... ...conforming product; notify QA/QC immediately. ●... ...safety requirements is always mandatory. 1st shiftDay shiftImmediate startShift workAfternoon shift
- ...according to batch records and recipes. ● Operate batch processing equipment such as mixers,... ...walk for extended periods throughout the shift. ● Ability to lift, carry, and handle... ...work around heat, steam, and hot liquids associated with kettle operations. 1st shiftDay shiftShift work
- ...Description The Bone Broth Line Operator is responsible for operating... ...documentation tasks throughout the shift. Key Responsibilities ●Set... ...; collect samples for QC and quarantine out of spec product... ...to wear required PPE for the duration of the shift. 1st shift.Day shiftShift work
$17.5 per hour
...Job Description Job Description Job Posting: PIV Operator – 1st Shift Location: Janesville, WI Shift: Monday–Friday, 7:00 AM–3:00 PM Pay Rate: $17.50 per hour Employment Type: Full-Time Position Overview We are seeking a dependable PIV Operator to join...Day shiftHourly payFull timeMonday to FridayShift work$1,213 per week
...Dialysis Tech Location: Janesville, WI Agency: talent4health Pay: $1,213 per week Shift Information: Days - 3 days x 12 hours Contract Duration: 13 Weeks Start Date: ASAP About the Position 3 Day Shifts X 12 Hrs Requirements...Day shiftFull timeContract workImmediate startShift work$3,309 per week
...Radiology Tech Location: Janesville, WI Agency: talent4health Pay: $3,309 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: ASAP About the Position 5 Day Shifts X 8 Hrs Requirements Required...Day shiftFull timeContract workImmediate startShift work$18 per hour
...Workers in a temperature-controlled candy production facility. 1st Shift: $19/hr | 4:45 AM – 3:15 PM | Monday-Thursday 2nd Shift: $20/... ...You'll help inspect, package and palletize finished candy, operate light machinery, and keep production moving safely and efficiently...Day shiftHourly payTemporary workSeasonal workLocal areaWeekend workAfternoon shift$18 per hour
...automotive background for our valued client in Janesville, WI. Apply today to be considered for this great opportunity! Pay: $18/hr Shift: M-F 8:30am-5pm Job Duties of the Production Worker: Measuring and marking surfaces to ensure accurate placement of...Day shiftWeekly payCurrently hiringShift work$23 - $25 per hour
...Adecco is assisting a client located in Janesville, WI in hiring a 1st shift CNC Machinist. Hours are 7am-3:30pm Monday-Friday paying based... ...Design and develop programs. Set-up, check programs and operate CNC machining equipment to perform a complex series of...Day shiftHourly payTemporary workLocal areaMonday to Friday$18 - $20 per hour
...Adecco is hiring Machine Operators for a growing manufacturer in Whitewater, WI. This is a contract-to-hire opportunity in a clean,... ...temperature-controlled facility with training provided. Pay & Shifts: 1st Shift: 8:00 AM - 4:00 PM | $18.00-$20.00/hr 2nd Shift: 4:00...Day shiftHourly payWeekly payContract workTemporary workLocal areaShift workNight shiftAfternoon shift$20 per hour
...full-time employment for associates who perform well. Pay & Shifts: ~1st Shift: 9:00 AM – 5:30 PM | $20/hour - (2) ~3rd Shift: 9:00... ...wheeled carts containing product throughout the department Operate hand pallet jacks Operate cloth machines under the...Day shiftHourly payFull timeTemporary workLocal areaShift workNight shift- ...Job Description Job Description The R2 Operator is responsible for the setup, operation,... ...periods throughout the production shift. ●Ability to lift and carry up to 50 lbs... ...varying temperature and humidity conditions in a food manufacturing facility. 1st shiftDay shiftShift work
- ...s a calling Worker Type: Regular Department: Operating Room Schedule: 40 hours per week / Day shift - Monday-Friday 7am-3:30pm. Call is every 5th night... ...Technology and Surgical Assisting (NBSTSA) Or Tech in Surgery - Certified - National Center for...Day shiftLocal areaRelocation packageMonday to FridayShift workNight shiftWeekend work
$18 - $22 per hour
...Shift: 1st Shift — 6:30 AM – 3:00 PM, Monday–FridayOvertime: Overtime may be mandatory based on business needs.Pay Range: $18–$22 per hour, based on experiencePosition SummaryThe Drill Press Operator is responsible for setting up and operating drill press equipment to...Day shiftHourly payTemporary workShift work$20 per hour
...Remedy Intelligent Staffing is currently hiring for Day and Afternoon Shift Experienced Production Workers for our valued client in... ...this great opportunity! Let's talk about the available shift: 1st Shift: 5:00am-3:00pm Monday-Friday, OT available 2nd Shift: 4:00pm...Day shiftHourly payWeekly payCurrently hiringMonday to FridayAll shiftsShift workAfternoon shift- ...kettle assistants, and the R2 operator to ensure each batch is produced... ...varying temperatures throughout the shift. Strict adherence to all GMP,... ...skills for coordinating with QC, kettle assistants, and the R2... ...and protective clothing, for the duration of the shift. 1st shiftDay shiftShift work
- ...Georgia Pacific is seeking Production Operators for their Janesville, WI facility. The Production... ...cost. Operators work a 12-hour shifts on a 2-2-3 schedule. Scheduled start... ...solve industry challenges, emphasizing innovation, quality, and customer-focused solutions...Hourly payTemporary workFlexible hoursShift workNight shift
$3,247 per month
...Allied Profession Allied Specialty Radiology Tech Job ID 37633670 Job Title Allied - Radiology Tech Weekly Pay $3247.0 Shift Details Shift Day Shift - 10 hours Scheduled Hours 40...Day shiftWeekly payShift work- Rad Tech Specialty EP Tech Shift Details: 10 Hour Day Shift, 4 Shifts Per Week Job Order Details: Start Date 07/24/2026, End Date 10/23/2026, Duration 13 Week(s) Client Details: City Janesville, State WI Meda HealthDay shiftShift work
- ...Experience competitive pay and benefits package at DSB Technologies: 1st Shift: 6:00 AM – 4:00 PM (Monday-Thursday) ~3+ weeks vacation ~... ...~ Find more information at -benefits As a CNC Operator at DSB Technologies, you will play a crucial role in the manufacturing...Day shiftWork at office
$3,336 per week
...Clinical Support Tech Clinical Support Tech - Clinical Support Tech Weekly Pay $3,336 Regular Pay Rate $52 Shift Details Shift 4x10 Days Shifts Per Week 4 Scheduled Hours 40 Start Date 07/24/2026 End Date 10/23/2026 Duration 13 Week(s) Float Required No Call Required...Day shiftWeekly payShift work$24 - $30 per hour
2nd Shift | MondayThursday| 3:00pm-1:30am Fridays 3pm-11pm Pay: $24$30/hour, based on experience Occasional Overtime Were looking... ...for an experienced CNC Machinist who can confidently set up, operate, and troubleshoot CNC machines while producing high-quality...Day shiftTemporary workAfternoon shift- ...performers consistently earn over $1,200 weekly!1st shift 5:45am-Finish 2nd shift 5:45pm-... ...Logistics @ Dollar General 101 Innovation Dr. Park in the Employee Parking: Walk... ...chain solutions partner with more than 650 operating locations, 19,000 associates, and 60,00...Day shiftImmediate startAfternoon shift
$18.5 per hour
...hours per week Schedule: Monday - Thursday, 1st shift Hours Pay: $18.50 per hour Job... ...the Plant Manager, the Part-time Quality Tech is responsible for all activities associated... ...environment. Prior work experience as a forklift operator. Able to read a tape measure. Able to...Day shiftHourly payPart timeWork experience placement$16 per hour
...Job Description Job Description Trim Table Operator – 1st Shift Location: Janesville, WI Pay Rate: $16.00/hour Schedule: Monday–Friday, 7:00 AM – 3:30 PM Position Type: Temporary Job Summary We are seeking reliable and detail-oriented Trim Table Operators...Day shiftTemporary workImmediate startMonday to Friday- ...Description Job Description The Case Packer Operator is responsible for the operation,... ...walk for extended periods throughout the shift on a production floor. ●Ability to frequently... ...gloves, hairnets, and safety footwear for the duration of the shift. 1st shiftDay shiftShift work
$18 - $25 per hour
...associates regularly earn over $1,200 per week! 1st shift 5:45am-Finish 2nd shift 5:45pm-Finish... ...Logistics @ Dollar General 101 Innovation Dr. Janesville, WI 53506 When you arrive... ...Unloader, youll help keep daily distribution operations moving efficiently. Your...Day shiftHourly payWeekly payPermanent employmentFull timeSeasonal workShift workAfternoon shift- ...Description Job Description Position Summary: Processing Operators are responsible for meeting production throughput and... ...of any noted issues with the product. Positions may be 1st, 2nd, or 3rd shift. Processing Operator 2 Next level position that may be...Day shiftNight shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Retort Operator - QC Tech 1st shift /innovation. Be the first to apply!
- bobcat operator Janesville, WI
- data center operator Janesville, WI
- frac operator Janesville, WI
- support operator Janesville, WI
- distribution operator Janesville, WI
- ski lift operator Janesville, WI
- telecommunications operator Janesville, WI
- female phone operator Janesville, WI
- refrigeration operator Janesville, WI
- refinery operator Janesville, WI



