Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Assembler Mfg Direct - Truss

Truckee Fire Protection District

Assembly Line Worker

This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned.

This job has no supervisory responsibilities.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful.

Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Assembler Mfg Direct - Truss in Acworth, GA vacancy
  •  ...and build a career with unlimited horizons. PURPOSE The Assembler is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL... 
    Suggested

    Builders FirstSource

    Acworth, GA
    2 days ago
  •  ...Assembler I The Assembler I is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. Essential Duties and Responsibilities Places parts... 
    Suggested

    Builders FirstSource

    Acworth, GA
    11 hours ago
  • $11 per hour

     ...Description Job Description   Come be a part of our growing TEAM!   Immediate openings for motivated individuals at North Georgia Truss Systems.  Multiple positions available in production.  Starting pay for non-experienced personnel is $11.00 P/h with daily... 
    Suggested
    Full time
    Immediate start

    NORTH GEORGIA TRUSS SYSTEMS LLC

    Cartersville, GA
    25 days ago
  • $18 per hour

     ...Job Description Job Description TRC Talent is looking for Assemblers for our client in Acworth, GA. Job Details: ~1st & 2nd shift available ~$18/hr+ ~ Lots of OT opportunities ~ Direct Hire! Job Responsibilities: Follow all safety requirements for... 
    Suggested
    Shift work
    Day shift
    Afternoon shift

    TRC Talent Solutions

    Acworth, GA
    4 days ago
  •  ...Assembler / Production Assembly Specialist If you excel at high-volume, repetitive assembly and need immediate contract income, this...  ...to the test in a fast-paced environment where your output directly contributes to production goals. Your responsibilities:... 
    Suggested
    Contract work
    Temporary work
    Immediate start

    Randstad

    Acworth, GA
    1 day ago
  • $18.5 per hour

     ...paycheck, and a better team , this is it. Join us as an Electrical Assembler and be part of a 100+ year global leader shaping the future of...  ...overtime (earn an extra $277+ per week) ~ Weekly Pay: Direct deposit or pay card-your choice ~ Affordable Health Benefits... 
    Weekly pay
    Full time
    Contract work
    Temporary work
    Monday to Friday
    Day shift

    The Ōnin Group

    Kennesaw, GA
    5 days ago
  •  ...to be accomplished by reading working instructions and verifying correct parts are at the station at the beginning of each shift. Assembles components by following the work instructions for the required station. Verifies specifications by measuring completed component as... 
    Full time
    Shift work

    Inalfa Roof Systems Group B.V.

    Acworth, GA
    4 days ago
  • $25 - $30 per hour

     ...electrical Maintenance technician roles Automotive / mechanical work If you’re mechanically inclined, we want to talk—even without direct industry experience. Schedule Full-time, field-based role On-call rotation (details discussed during interview) Why... 
    Full time

    Super Source Inc

    Kennesaw, GA
    13 days ago
  • $60k - $75k

     ...hands-on technical work and is comfortable traveling to customer sites to diagnose and resolve equipment issues. Job Details: ~ Direct Hire Opportunity ~ Salary: $60K - $75K ~1st Shift ~ Bilingual in Spanish required ~ Travel to customer sites required... 
    Work at office
    Day shift

    TRC Talent Solutions

    Kennesaw, GA
    17 days ago
  •  ...Entry-Level Assembler / Component Handler Looking for a dependable, hands-on role that offers ultimate flexibility and consistent pay? Become an entry-level assembler / component handler! This role is perfect for those with little to no previous experience who are eager... 
    Temporary work
    Immediate start
    Shift work

    Randstad

    Kennesaw, GA
    1 day ago
  •  ...Assembler/Assembly TechnicianAre you a skilled assembler or assembly technician looking for rewarding work with the benefit of consistent pay? Join our network where your precision and expertise are valued. We offer flexible shifts and short-term mandates in light manufacturing... 
    Temporary work
    Immediate start
    Flexible hours

    Randstad

    Kennesaw, GA
    4 days ago
  •  ...Randstad - [Production Operator / Assembly Line Worker] As an Assembler at Randstad, you'll: Perform the assembly, loading and unloading of parts; Assemble components and parts according to specifications and blueprints; Operate hand tools and machinery to fit, connect... 
    Immediate start

    Randstad

    Acworth, GA
    3 days ago
  •  ...with unlimited horizons. Purpose This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. Essential Duties And Responsibilities... 

    Builders FirstSource

    Marietta, GA
    11 hours ago
  • Onin Staffing - - Responsibilities: Assemble and finalize electrical devices and assemblies; Load firmware/programs using computers; Read electrical schematics and CAD drawings; Install components and route wiring per specifications; Maintain clean, safe, organized work... 

    Onin Staffing

    Kennesaw, GA
    17 hours ago
  •  ...All of our kits have pre-packaged and pre-cut materials for easy assembly and installation. Most kits can be built by one installer, in...  ...crews Work as much or as little as YOU want! DAILY pay by Direct Deposit If you have... Building / construction experience... 
    Daily paid
    Full time
    For contractors
    Immediate start
    Flexible hours

    Backyard Products

    Kennesaw, GA
    11 days ago
  • $50k

     ...Electrical Assembly TechnicianLocation: Acworth, GaPosition Type: Full-Time, PermanentSalary: Up to $50,000 base plus Full Paid Benefits, including MDV, 401kVacation: Generous vacation program, including 2 weeks vacation, standard holidays, and 2 weeks paid vacation at... 
    Full time

    Staff Financial Group

    Acworth, GA
    4 days ago
  • $18 - $19 per hour

     ...join our team in Kennesaw, GA. The ideal candidate will have experience reading blueprints, operating fabrication equipment, and assembling metal components to precise specifications. This is an excellent opportunity for individuals looking to grow their skills in a fast... 
    Hourly pay
    Monday to Friday
    Shift work

    AtWork!

    Kennesaw, GA
    5 days ago
  • $20 per hour

     ...Mechanical Assembler – Manufacturing Location: Cartersville, GA Pay: Starting at $20.00 per hour Mechanical Assembler Job Summary A growing manufacturing company in the Cartersville, GA area is hiring five Mechanical Assemblers to join its production team.... 
    Hourly pay
    Shift work

    American Made Solutions LLC Defunct

    Cartersville, GA
    1 day ago
  •  ...Production Assembler C130 Aeronautics Company, Georgia 695807BR Basic Qualifications Requires twelve months previous experience...  ...Stipend Available Possible Req Type Full-Time Direct/Indirect Direct Join us at Lockheed Martin, where your mission... 
    Hourly pay
    Full time
    Traineeship
    Work at office
    Remote work
    Relocation
    Shift work
    3 days per week

    Lockheed Martin

    Marietta, GA
    1 day ago
  •  ...to Engineering and UL508A specifications. Employees will be responsible for but not limited to the mounting, wiring, cutting, and assembling of various components required in the build process. Duties and Responsibilities Accurately measure, drill, punch and cut... 
    Hourly pay
    Monday to Friday
    Shift work
    Day shift

    Copeland

    Kennesaw, GA
    2 days ago
  •  ...On-Site Merchandise Assembly Technician in Kennesaw, Georgia Do you feel like your last year has been wasted at a dead-end job? Their...  ...squat, and bend over for long periods of time. Can follow directions in the assembly of required products Must be mechanically... 
    Weekly pay
    For contractors
    Local area
    Immediate start
    Flexible hours
    Weekend work
    Day shift

    Around the Clock Services

    Kennesaw, GA
    2 days ago
  • $18.5 per hour

     ...Electrical Control Panel AssemblerOur client is seeking an Electrical Panel Builder / Electrical Assembler to build and wire custom industrial control panels.Blueprint and schematic reading is required. Candidates MUST be able to independently read, understand, and work... 
    Temporary work
    Monday to Friday
    Shift work

    Elwood Staffing

    Kennesaw, GA
    4 days ago
  •  ...work.Good hand-eye coordination and manual dexterity.Ability to work in a team-oriented environment.Willingness to learn and take direction from experienced welders.Prior experience or certification in welding is a plus but not required.Working Conditions:Exposure to heat... 
    Monday to Friday

    TRC Talent Solutions

    Kennesaw, GA
    4 days ago
  • $55k - $60k

     ...based in Marietta, GA to hire a Panel Builder . This is a direct placement opportunity with a partner that designs and builds machinery...  ...or work visa documentation. Job Details: • Fabricate, assemble, build, wire, and test industrial control panels. • Responsible... 

    Selectek

    Marietta, GA
    2 days ago
  • Sailors in the Navy’s Construction Battalion are makers. They’re driven to work with their hands, and they know the value of doing a job right the first time. They’re tougher than any task and they’re not afraid to get a little dirty. If this sounds like you, then you ...
    Part time
    Overseas

    U.S. Navy

    Kennesaw, GA
    3 days ago
  • $15 per hour

     ...Job Description Job Description 1st shift Assembler | $15/HR | Onsite   What Matters Most:  Schedule: Monday-Thursday 7am-5pm...  ...opportunity with career growth and stability  Weekly Pay with direct deposit or pay card  When you work through The Reserves Network... 
    Weekly pay
    Temporary work
    Monday to Friday
    Day shift

    The Reserves Network

    Woodstock, GA
    10 days ago
  •  ...Job Description Job Description Openwork is currently engaged in a search to find a skilled Assembly/Installation Technician in Acworth, GA. In this hands-on and dynamic role, you will be responsible for assembling and installing advanced packaging machinery, troubleshooting... 
    Daily paid
    Weekend work

    Openwork

    Acworth, GA
    12 days ago
  •  ...Six months of electrical wire harness fabrication, electrical assembly experience, and/or wire routing. This experience can be acquired...  ...Marietta-GA Marietta 30063 No Yes Full-Time Direct At Lockheed Martin, we use our passion for purposeful innovation... 
    Hourly pay
    Full time
    Work at office
    Remote work
    Flexible hours
    3 days per week

    Lockheed Martin

    Marietta, GA
    1 day ago
  • $18.76 per hour

     ...Job Description Job Description TRC Talent is looking for Assemblers for our client in Acworth, GA. Job Details: ~3rd shift schedule...  ...6/hr + $.60(when on 3rd shift) ~ Lots of OT opportunities ~ Direct Hire! Job Responsibilities: Follow all safety... 
    Shift work
    Night shift
    Day shift
    Afternoon shift

    TRC Talent Solutions

    Acworth, GA
    3 days ago
  •  ...ultimate flexibility and consistent pay? Become an entry-level assembler / component handler! This role is perfect for those with little...  ...components (e.g., snapping, gluing, screwing, packaging) under direct supervision. - Material preparation: count, sort, and organize... 
    Temporary work
    Work experience placement
    Immediate start
    Shift work
    Kennesaw, GA
    2 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Assembler Mfg Direct - Truss. Be the first to apply!