Senior Hardware Design Engineer - Low Voltage Electric Power

Description

Our Mission:
At General Motors, our product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed not just to be seen, but to be felt. We’re turning today’s impossible into tomorrow’s standard —from breakthrough hardware and battery systems to intuitive design, intelligent software, and next-generation safety and entertainment features.

Every day, our products move millions of people as we aim to make driving safer, smarter, and more connected, shaping the future of transportation on a global scale

In this role, Senior Hardware Design Engineer – Low Voltage Electric Power, you will be responsible for Hardware Design & Execution for any variety of components in the electric power space (e.g. Power Distribution Units, Battery Management Systems, Power Convertors, Inverters, etc.) and develop and/or improve hardware development process with center of expertise. You will work with cross functional teams (semiconductor, DREs, GM software, PCB layout, Mechanical Engineering, Supplier, Validation) to deliver quality product on time.

You will effectively achieve program milestones by thorough and effective program management.

I am seeking a high performing independent engineer to develop winning execution strategies, oversee solutions, resolve issues, and deliver continuous improvement for electric power components considering quality, cost, and timing.

Responsibilities

Collaborate with other teams, such as software, diagnostic, mechanical, and manufacturing teams, and strategize with Tech Specialists, DRE’s, and Safety to ensure seamless integration of electrical hardware designs into the overall product.

Lead embedded designs for advanced module architectures.

Lead new IC design/development strategic to advanced in-vehicle architectures

Lead electrical schematic design and PCB layout

Optimize proposed electrical hardware designs, considering factors such as cost, performance, reliability, and manufacturability.

Support next generation designs in digital/analog hardware including Gig+ ethernet, processors, memory, eFuse, FET, HSD/LSD, various semi associated within electric power components

Perform/Review electrical worst-case analysis, Power distribution Analysis, Component selection and compatibility Analysis, Environment Analysis, EMC analysis, Weibull and other component robustness analysis

Represent the GM HW team as design expert in the core technologies developed among the team

Optimize design and verification tests/analysis for electronic circuit design including five-point parametric tests and define/implement end of line production tests

Lead development process for either supplier owned or inhouse designs with production build team ensuring quality documentation (PFMEA, Control Plans, monitoring systems, EOL).

Continuous Improvement mindset by refining/optimizing requirements per KPIs with Electric Power team

Maintain component Hardware Design deliverables e.g., Block Diagram, Schematics, PCB layout, etc.

Lead Peer Reviews and resolve issues (e.g. integration, interfaces, systemic issues)

Support formal change control and ISO9001quality standards for Engineering Change Request (ECR) of components and appropriate documentation of design and process.

Support Assembly Plant issue resolution

Provide technical leadership for rapid issue resolution and root cause analysis

Support Product Investigations (SFI Process)

Lead Cost Reduction initiatives from evaluation to implementation

Provides direction to Design Release Engineers (DREs) in product development team meeting

Create and maintain Best Practices

Demonstrated ability to work cross-functionally within the electric power team and across other SMTs.

Ensure all Key Performance Indicators (i.e., piece cost, investment, mass, base engineering content, performance, and IPTV) are met.

Develop/Review/Approve all In-process Electrical verification for a component validation (includes component software verification) collaborating with DREs and others to ensure the plan is executed in time to meet program imperatives.

Develop new or improve analysis / simulation or testing to improve KPIs and incorporate into standard validation plans.

Provide engineering expertise in Formal Design, Peer and Quality Valve reviews to ensure robust engineering designs and processes.

Support vehicle integration activity for pre-production and production vehicles

Lead/participate in issue resolution for design and development issues, ECU warranty analysis, parts restriction and report updates as required to Engineering and Vehicle Team leadership

Lead/support DFMEA/PFMEAs/control plans/End of Line testing/APQP development/ Lean manufacturing/ 8D issue resolution/ compliance to ISO9001 and TS16949 compliance.

Requirements

Bachelor of Science in Engineering Required. Masters degree preferred

7+ years of experience designing automotive hardware electronics.

Experience creating digital and analog hardware interfaces, including schematics, PCB layouts, and supporting documentation.

Experience with launch excellence initiatives across requirements, product safety, systems engineering, quality, and analytics.

In-depth knowledge of low-voltage power distribution, including eFuses, FETs, thermal management, Li-ion batteries, and DC/DC converters.

In-depth knowledge of requirements engineering processes and tools, including DNG, FMEA, and Preliminary Hazard Analysis.

In-depth knowledge of regulatory and design requirements, including EMC, environmental durability, electrical robustness, signal integrity, and noise mitigation.

In-depth knowledge of hardware and embedded software verification and validation processes, including associated development and test tools.

Understanding of hardware design, failure modes, and the operating principles of mechanical and electrical systems.

Thorough knowledge of design, development, testing, manufacturing, assembly operations, and engineering processes and procedures.

Proficiency with design and analysis tools such as Mentor Graphics, Mathcad, PSpice, and Saber.

Knowledge of communication protocols, including Ethernet, SPI, I2C, IsoSPI, UART, PCIe, SerDes, AVB, and CAN.

Knowledge of BIQ/GMS-like standards and operational improvements using CMMI, ASPICE, ISO 26262, and other best practices.

Strong oral, written, analytical, and problem-solving skills, including experience with REDX, OpEx, and DFSS methodologies.

Demonstrated ability to work cross-functionally within Electrical and across other SMTs.

Strong interpersonal skills, with the ability to collaborate effectively, motivate employees, and drive results.

Ability to navigate ambiguity, resolve complex and unusual problems, and balance technical solutions with business priorities.

Preferred Qualification

Experience with compute, connectivity, Body, and low-voltage distribution systems, including electronic component manufacturing, assembly, PCB design, and manufacturing.

Knowledge of RTOS concepts, CG2999, CPU utilization, and supporting functions such as quality data analytics and Service/TAC.

Preferred experience with simulation tools and methods, including CarSim, PreScan, Saber, Simulink, Synopsys/ANSYS, Sherlock, CFD, FEA, SPICE, MathCAD, MIL, SIL, HIL, and VIL testing.

#LI-SW1

This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate

Why Join Us

This role offers the opportunity to work on critical vehicle electric power content by owning the mechanical and packaging execution of shields for generators, inverters, converters, battery vent tubes, jump start nuts, and related 12V hardware from concept through production. You will influence key integration decisions, solve packaging challenges, and help deliver robust solutions that support successful vehicle launches.

Work Environment

This position requires strong collaboration across electrical, systems, packaging, manufacturing, purchasing, quality, and supplier teams . Candidates should be comfortable leading technical discussions, driving issue resolution, and executing engineering deliverables in support of aggressive program milestones.

Bonus Potential: An incentive pay program offers payouts based on company performance, job level, and individual performance.

Benefits : GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more.

Diversity Information

General Motors is committed to being a workplace that is not only free of discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that workforce diversity creates an environment in which our employees can thrive and develop better products for our customers. We understand and embrace the variety through which people gain experiences whether through professional, personal, educational, or volunteer opportunities.

We encourage interested candidates to review the key responsibilities and qualifications and apply for any positions that match your skills and capabilities

About GM

Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.

Why Join Us 

We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.

Total Rewards | Benefits Overview

From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. 

Non-Discrimination and Equal Employment Opportunities (U.S.)

General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.

All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. 

We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire.

Accommodations

General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us View email address on us.fitly.work or call us at View phone number on us.fitly.work. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.