Electro Mechanical Technician
$43.9 per hourExcelsior Citizen
Electro-Mechanical Technician
The Electro-Mechanical Technician at Keurig Dr Pepper will be responsible for facilitation and leadership to install, troubleshoot, maintain, and improve process and packaging equipment, to maximize production and maintain Keurig Dr Pepper's high standards in safety and quality. This role will also be engaged in improving maintenance procedures and manufacturing processes for the improvement of safety, quality, delivery, cost and culture.
Responsibilities:
- Maintain a safe and healthy environment, demonstrating safe behaviors at all times.
- Focus on Good Manufacturing and Food Safety practices in all work.
- Analyze mechanical, pneumatic, hydraulic or electrical problems and make repairs through adjustments, defective parts replacement, or fabrication.
- Wire moderately complex control circuits.
- Teach basic mechanical skills to line operators to support autonomous maintenance, TPM functions, equipment set-up and center lining.
- Fabricate, repair, and install hangers and all types of piping including hot/cold water, steam, process and condensate, utilizing formulas for all phases.
- Ability to quickly learn to weld and machine metals, plastics, and composites.
- Fabricate or replicate minor pieces for the repair or replacement of parts on equipment.
- Complete size changeovers and troubleshoot liquid fillers and packaging equipment.
- Identify root causes of mechanical, electrical and control failures and resolve with effective problem-solving tools with minimal downtime or supervision.
- Troubleshoot and program minor changes in Allen Bradley PLC (SLC500, MicroLogix, CompactLogix and ControlLogix).
- Generate productivity and continuous improvement ideas.
- Demonstrate KDP values of Team First, Deliver Big, Think Bold, Being Fearless and Fair.
Total Rewards: Pay starting at $43.90 per hour. The employee will move to a higher rate of $46.26 per hour in the quarter after their 6-month anniversary. Shift prem. $1/hr Where Applicable: Benefits eligible day one!! Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement
Requirements:
- 3 years' experience maintaining, troubleshooting, & repairing mechanical & electrical/controls/PLC systems (Allen-Bradley systems experience required, including, but not limited to, the Rockwell FactoryTalk suite of software, Logix platform, & proficient understanding of Allen-Bradley)
- Ability to read and understand complex instructions, prints, flowchart, block diagram, and schematics.
- Ability to competently use and understand precision testing and diagnostic equipment.
- Computer knowledge of Microsoft Office
- Ability to get along with others, be punctual, and follow instructions.
- Ability to lift up to 50 pounds on a frequent basis.
Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper®, Canada Dry®, Mott's®, A&W®, Peñafiel®, GHOST®, 7UP®, Snapple®, Clamato® and Core Hydration®. Our global coffee business spans more than 100 markets and includes the leading Keurig® single‑serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth.
$43.9 per hour
...Job Overview: 2nd Shift; 2pm - 10:30PM The Electro-Mechanical Technician at Keurig Dr Pepper will be responsible for facilitation and leadership to install, troubleshoot, maintain, and improve process and packaging equipment, to maximize production and maintain Keurig...SuggestedHourly payWork at officeShift workAfternoon shift- ...Description: This position performs complex mechanical, electrical, pneumatic, vacuum and... ...to include both servo-mechanically and electro-mechanically operated equipment in the Aerospace... ...experience as an electromechanical technician. ~ Plumbing experience, a plus but not...SuggestedPermanent employmentWork at officeFlexible hours
$33 - $38 per hour
...Electromechanical Technician FieldBridge is looking for an Electromechanical Technician in Irving, TX. We offer weekly pay + benefits... ...role supports plant maintenance operations with a focus on mechanical and electrical troubleshooting, preventative maintenance, and...SuggestedWeekly payMonday to FridayAfternoon shift- ...This role produces and ensures the proper functioning of electro-mechanical systems and components used in unmanned aircraft systems. This... ...production environment, preferred. ~2 years' electronics technician degree, preferred. ~ Experience with the gimballed camera...SuggestedFlexible hours
- Assistant Partial Program Manager (Avionics) Part 121 The Assistant Partial Program Manager (Avionics) Part 121 serves as a full assistant to a Partial Program Manager (Avionics) Part 121 who is assigned a portion of the airworthiness program performing inspections, ...Suggested
- ...HaveProblem solving abilities.Ability to read blueprints and interpret complicated specifications.Extensive understanding of complex mechanical assembly, cable assembly and module assembly.Understanding and operation of various hand and power tools involved in assembly and...Flexible hours
- Job Title Duties Within assigned technical program, assures on a continuing basis that organizations are properly and adequately organized, staffed, and equipped; have and conduct an adequate training program, including an acceptable record. Provides guidance ...Contract work
- Aviation Safety Inspector (Rotorcraft/Helicopter) The Aviation Safety Inspector (Rotorcraft/Helicopter) performs the full range of General Aviation certification, surveillance and inspection duties for assigned air carriers, air operators, air agencies, airmen, and designees...
- ...Job Description Job Description Job Summary: We are hiring 2 Rack & Stack Technicians for a contract opportunity in Irving, Texas. The ideal candidate will have hands-on experience working in data center or telecom environments, assisting with the installation and...Contract workWork at office
- Duties Under the general direction of the Principal Inspector, performs the following: Technical Administration Assures on a continuing basis the organizations are properly and adequately organized, staffed and equipped, have and conduct an adequate training program...Contract work
- Assistant Principal Oversight Inspector The Assistant Principal Oversight Inspector serves as a full assistant to a Principal Inspector performing the full range of certification, surveillance, and inspection duties for assigned air carriers, air operators, air agencies...Remote work
- ...accomplished on POWERPLANTS off wing. The PPM (Powerplant) coordinates with the PPM (Fleet) on Airworthiness Directive, compliance, Mechanical Reliability Reporting, Mechanical Interruption Summary Reporting, engine removal rates, powerplant related incidents, powerplant...
- Flight Oversight ASI Duties Flight Oversight ASIs do not conduct certification (pilot evaluating, testing, and checking) job functions as a required crewmember, including safety pilot. The incumbent will not, in any scenario, act as a required crewmember or safety pilot...Remote work
$28 per hour
...Onsite Service Technician BlueCrest is seeking an experienced Onsite Service Technician to provide dedicated technical support... ...experience diagnosing, troubleshooting, and repairing complex electro-mechanical systems in a customer-facing environment. Strong understanding...WorldwideFlexible hoursShift workWeekend work$43.45 per hour
...Maintenance Mechanic PBNA $43.45 / hour Position is responsible for repairing and installing advanced production/manufacturing equipment. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. May mentor...For contractorsWeekend workAfternoon shift- ...Starts Here. Dallas-Fort Worth projects are ramping up for fall, and TradeSTAR is looking for experienced Structured Cabling Technicians ready to get to work. Bring your cabling skills, installation experience, and attention to detail we ll help connect you with...Weekly payFor contractors
$23 - $26 per hour
...Cable Technician Technician Location: Dallas, Texas Job Title: Cable Technician Location: Dallas, TX Pay Rate: $23-26 Company Summary: Our client is a proven leader in the communications industry, offering a professional level of cabling expertise to their...Work experience placement- ...Job Position: VD Level 2 Location: Irving, TX 75063 Pay Rate: $0.00/hr Shift: Description: Level II Voice & Data Technician You've Got the Foundation. Let's Build on It. TradeSTAR is looking for Voice & Data Level II Technicians for opportunities...Work at officeImmediate startMonday to FridayShift work
- ...Job Description Job Description ~ PRIMARY FUNCTION Under the guidance of the Maintenance Supervisor, the Electro-Mechanical Technician (EMT), supports operation, inspection, and maintenance processes from mechanical, electrical, and plumbing for all production equipment...For contractorsWork experience placementWork at officeFlexible hoursNight shift
- ...Job Description Job Description We are seeking a Line Technician to join our team at a manufacturing facility. The ideal candidate will have mechanical knowledge and experience working with hand and power tools in a production, warehouse or factory setting. Responsibilities...Shift work
$19 - $20 per hour
...DME Express is having tremendous growth and currently in need of the best drivers/technicians to deliver and pick up medical equipment such as Wheelchairs, Hospital Beds and Oxygen to Hospice Patients. DME Express is a medical supply company dedicated to delivering the...Work at officeWeekend work- Electromechanical TechnicianApply today to be an Electromechanical Technician with one of the most innovative and trusted packaging... ...Technician installs, maintains, and repairs complex electrical and mechanical manufacturing equipment while ensuring optimal performance and...For contractorsMonday to FridayFlexible hoursShift workNight shiftWeekend workDay shift
- Job Duties Under the general direction of the Front Line Manager, assists the Partial Program Manager (Maintenance), in accomplishing the following duties: A. Technical Administration Within assigned technical program, assures on a continuing basis that organizations...Contract work
- Assistant Partial Program Manager (Maintenance) Part 121 The Assistant Partial Program Manager (Maintenance) Part 121 serves as a full assistant to a Partial Program Manager (Maintenance) Part 121 who is assigned a portion of the airworthiness program performing inspections...
$21 per hour
...Job Description Position: Quality Technician - 3rd Shift Days/Times: Sun-Thurs (9pm-5:30am) Department: Quality Location: Gratz Manufacturing Plant Pay Rate: $21.00 + $1.50 Shift Diff. Reports to: Dept. Supervisor Status: Full-Time/Non-Exempt...Daily paidTemporary workShift workNight shift$26.78 - $31.5 per hour
...Mechatronics & Robotics Technician Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating... ...with proper documentation. Troubleshoot electrical and mechanical problems related to all Material Handling Equipment (MHE) which...Weekly payMinimum wageFlexible hours- ...commercializing advanced technologies.Excellent systems-level understanding across relevant technical disciplines, including electronics, mechanics, physics, and user interfaces.Demonstrated success developing and commercializing new products or solutions that incorporate...Full timeLocal area
- ...Quality and Production areas What You Bring Required: • Experience in Quality Assurance or Quality Control roles within an electro-mechanical product manufacturing environment • Experience with Windows environment and some networking experience including basic LAN/...Flexible hours
- Automation Tester NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. NTT DATA's client is currently seeking an Automation...Shift work
- ...potential. Together, we aim for being the first to do the right thing at the right time. Join the home for entrepreneurs! The Senior Mechanical Systems Engineer will be responsible for leading the design, development, and implementation of various material handling...Permanent employmentFull timeTemporary workLocal areaVisa sponsorshipWork visaFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electro Mechanical Technician. Be the first to apply!
- mechanical solidworks Irving, TX
- mechanical sales Irving, TX
- mechanical commissioning Irving, TX
- mechanical installation Irving, TX
- mechanical design Irving, TX
- entry level mechanical design Irving, TX
- electro mechanical assembly technician
- wind energy technician
- electro-mechanical maintenance technician
- electromechanical technician




