Aluminum Fabricator/Welder

Job Description Structural Aluminum Fabricator/Welder They MUST have EXPERIENCE AT LEAST 5YRS in the structural steel industry and 2 YEARS in the Aluminum Fabrication Industry. This is a full-time position with competitive pay, based on experience, and immediate work within our shop in Portsmouth, Va. Must be able to demonstrate ability to perform multi-pass, all position fillet and butt weld using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding). Complete lay outs using drawings and/or templates and/or by picking up and developing the geometry required. Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment. Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, shielded metal arc. Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed. Preform grinding and joint preparation for NDT processes. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Must be capable of using oxy/fuel torch to cut steel. Self-starter that displays a strong work ethic and a commitment to quality workmanship. Job Type: Full-time Aluminum Fabrication - 2 years nCompany Description MARRICK is a small fab shop that specializes in one/off projects for our customers. MARRICK is a small fab shop that specializes in one/off projects for our customers.