Ironworker Fabricator/Boilermaker

Job Title

Job Description

Ability to take lead in erection of steel, fabrication, grid layout, rigging etc.

Ability to perform all job duties of craft trade.

Drawings

Ability to read, understand IFC drawings.

Ability to make hang list, read details off drawings, read all notes on drawings before erection, locate and understand ECN's and holds on drawings.

Understand when to stop production work and when a RFI needs to be initiated.

Read and understand craft specs and cut sheets, craft spec procedures and recommendations

Able to locate piece marks for correct views and know how to pick out different elevations

Being able to know the correct installation based on the orientation.

Knowledge of symbols based on legend

Rigging

Knowledge of all types of safe rigging practices (chokers, slings, etc.)

Ability to dictate correct knots based on material

Connection

Know all aspects of connecting

Correct procedures of Bolting

Torque vs Tension

Fabrication

Ability to read cut sheets

Lay out from drawing

Cut material from lay out and cut sheets

Torque vs. Tension

Knowledge of Torque and Values

Knowledge of Tension

Turn of the nut method

Different types of indicators

Understand how to use a skidmore

Plan work and execute

Ability to take drawings, required material, line out helpers and execute work

Tools and knowledge

Knowledge of specialty tools (torque wrench, skidmore, torque guns, mag drills, hogan drills)

Welding and cutting

Basic knowledge of welding (machine set up, Mig, stick, gas, etc.)

Knowledge of cutting torch, set up, dangers, usage, cleaning, types of tips and when to use the different types of tips

Equipment Knowledge

Knowledge of JLG's man baskets, cranes

Basic maintenance (inspections)

Safe operations practices

Signaling of equipment (ERTS, NCCO, NCCER)

Flagging of cranes, forklifts, manlifts

Knots

Tying knots for tag lines, etc.

Basic knots for lashing

Math Skills

Footage, addition, subtraction, multiplication, division, fractions to perform all craft duties.

Responsibilities

Position Responsibilities

• Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
• Identify all tools required for tasks.
• Identify safety risks and the precautions required to eliminate those risks.
• Fabricate equipment according to blueprints or instructions from supervisors.
• Hoist equipment and tools into location via bull rigging or crane.
• Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.
• Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
• Bolt aligned structural-steel members in position for permanent riveting or bolting.
• Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.
• Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.

Qualifications

Qualification Highlights

• Must have 4+ years experience as a Iron-worker/ Structural Iron-worker, Boilermaker, and Fabricator.
• Must know how to fab steel.
• Must possess all Knowledge Skills and Abilities for positions (see below).
• Must be able to meet all physical requirements.
• Must be able to work at heights in excess of 300 ft.
• Must have all required tools.
• Must have reliable transportation.

Physical Requirements

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, work off of platforms and man lifts, and may occasionally work out on an open structure using the appropriate fall protection requirements. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots.

**CERTIFICATIONS AND/OR LICENSES REQUIRED**

NCCER - Must have Industrial Ironworker, Boilermaker, and Fabricator certifications.

Must have valid DL and reliable transportation.

ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

Job Info

• Job Identification 14427
• Posting Date 05/19/2026, 08:32 PM
• Locations 602 Copper Rd, Freeport, TX, 77541, US
• Job Schedule Full time