Welder II

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Manual Labor Brighton, MI, US 30+ days ago Requisition ID: 1842 Objective of the Position Rework prewelded assemblies from robotic stations. Reworks surface defects such as dings, dents, and buckles in exhaust systems by performing the following duties. The position incumbent ensures, that Examines surface of part to determine extent of defect. Fills holes and gaps of defected part by Mig welding area based on specifications. Welds sub-assemblies and/or final assemblies Smooth welded or defected area by Tig welding if required per specification. 100% rework work on parts requires operator sign-off and documentation of all non-conformances. Place re-worked parts on in-process racks to be leak tested. Leak tests component part and rework if needed. Operate robotic weld cells, gauges, leak testers May manually assembles and welds complete exhaust systems that have not already been welded from start to end using components parts supplied. The position incumbent ensures, that Conduct all business related activities for, and on the behalf of, Eberspaecher within the limits of applicable local, state, and federal legal requirements. Provide support to, and compliance with, all local and corporate Eberspaecher Health, Safety & Environmental (HSE) policies, procedures and other HSE related requirements. Quality - Demonstrates accuracy and thoroughness and follows all EETAM polices related to TS16949 and ISO 14001; looks for way to improve and promote quality. Remove & replace individual component parts, occasionally performing welds that are 100% of the length of the seam. Other duties as assigned. Requirement Profile: Professional Background / Basic Qualification / Work Experience: High school diploma or general education degree (GED) Minimum six (6) months’ related experience in manufacturing setting. Must pass each standard global re-certification test as required. Required to take qualification tests using the GMAW (MIG/MAG) and GTAW (TIG) processes. Technical Expertise: Ability to read and comprehend simple instructions, short correspondence, and memos, and write simple correspondence. Strives to continuously improve expertise. Working Conditions: This position involves working indoors around mechanical and hazards, fumes, irritants, with exposure to cold, heat and high noise levels under adverse conditions. While performing the duties of this job, the employee is exposed to moving mechanical parts and fumes or airborne particles. Physical Requirements: Sits: Occasionally .25 - 2.5 hours daily Stands: Frequently 2.5 - 5.5 hours daily Walks: Occasionally .25 - 2.5 hours daily Drive: Never Lift/Carry 0-10 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 10-20 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 20-50 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 50- over 100 lbs.: Occasionally .25 - 2.5 hours daily Reach Above: Frequently 2.5 - 5.5 hours daily Bend/Stoop: Frequently 2.5 - 5.5 hours daily Use Hands for Pushing/Pulling: Frequently 2.5 - 5.5 hours daily Use Hands for Manipulations: Continuously 5.5 - 8 hours daily Stress Level of Job: Low The statements herein are intended to describe the general nature and level or work being performed by employees, and are not constructed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Further, they do not establish a contract for employment and are subject to change at the discretion of Eberspaecher North America, Inc. #J-18808-Ljbffr