Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Mill Operator I

$21.28 per hour
Full-time

Doe Run Co

At The Doe Run Company, our jobs help supply minerals and metals that support our way of life. $21.28/hour 5% targeted monthly bonus. Insurance benefits start day 1. 80 hours vacation after 90 days. On-the-job training with career growth opportunities. The Doe Run Company is seeking a Mill Operator I to learn to safely and effectively assist in mill operations that produce all finished concentrates. This rotating shift position will be located at Brushy Creek Mill in Boss, MO. The work location may change as needed to support production and business needs within the Viburnum Trend in Southeast Missouri. Education & Experience:

  • High school diploma or equivalent, preferred.
  • No experience required, some industrial experience preferred.
  • Experience operating skid steer loaders, forklifts, and larger loaders
preferred. * Valid driver’s license. Knowledge, Skills, & Abilities:
  • Ability to read a micrometer and a tape measure.
  • Ability to safely drive a forklift or other mobile equipment and become
certified (forklift). * Environmental safety and health rules and regulations training (MSHA) training. * Basic math skills. Responsibilities:
  • Perform daily preventative maintenance tasks.
  • Assist mill operators with mixing mill reagents.
  • Maintain and clean work area. Complete all daily end-of-shift housekeeping
tasks. * Assist the mill operators II and III in the processing of all finished concentrate products. * Operate wheel loaders to load ore into the process and load concentrate trucks. * Complete tasks in a safe and environmentally compliant manner by following EHS (environmental, health, and safety) policies, procedures, and best practices; support and assist peers in working in a safe, compliant manner; report unsafe acts or conditions, incidents, and deviations; and provide feedback to support continuous improvement in EHS performance. * Perform other duties as assigned. Work Environment, Physical & Lifting: * Regularly works near moving, mechanical parts; occasionally works in confined spaces, is required to wear personal protective equipment, including but not limited to, a respirator, hearing protection, steel-toe boots, and eyewear, and works at heights of four feet or more with fall protection. Regularly exposed to vibration; frequently exposed to outdoor weather conditions and extreme heat; occasionally exposed to wet, humid conditions and extreme cold. Works rotating shifts. Exposed to moderate noise levels. * Regularly requires talking, hearing, standing, walking, reaching with hands/arms, and repetitive movement; frequently requires feeling attributes of objects, grasping, pushing, and driving; Occasionally requires stooping, kneeling, crouching, crawling, and climbing or balancing. Requires clarity of vision, three-dimensional vision, the ability to judge distance and spatial relationships, precise hand-eye coordination, and the ability to identify and distinguish colors. * Regularly required to lift up to 50 pounds; occasionally required to lift up to 100+ pounds. Based in St. Louis, Missouri, USA, The Doe Run Company is a privately held natural resources company and a global provider of lead, copper, and zinc concentrates. Dedicated to environmentally responsible mineral and metal production, Doe Run operates the Resource Recycling facility, one of the world’s largest, single-site lead recycling centers, located in Boss, Missouri. The company also owns six operating mines in one of the world’s largest lead mining districts, also in Missouri: Brushy Creek, Buick, Casteel, Fletcher/West Fork, Mine 29/Viburnum and Sweetwater. The Doe Run Company and its subsidiaries deliver products and services necessary to provide power, protection, and convenience. Doe Run has operations in Missouri, Washington, and Arizona. For more information, visit [ Doe Run is an Equal Opportunity Employer, including disability and veterans.

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Mill Operator I in Missouri vacancy
  •  ...materials such as Titanium, Aluminum, Stainless Steel, and exotic metals.   Job Details: ~Machinist needed for 3 axis and 5 Axis Milling Machines and 5 axis Gantry  ~ Milling Machines. ~ Trade School and experience a plus, hands-on type of work. We Offer: ~... 
    Suggested
    Shift work
    Night shift
    Weekend work
    Day shift
    Afternoon shift

    Heizer Aerospace Inc.

    Pevely, MO
    1 day ago
  • $26 per hour

     ...environment, and take pride in producing quality work, we want to hear from you. What You'll Do Set up, layout, and operate CNC lathes and mills Read blueprints, work orders, and tooling instructions Select and install tooling, fixtures, and work-holding devices... 
    Suggested
    Permanent employment
    Full time
    Monday to Friday
    10 hours per week
    Flexible hours
    Shift work
    Weekend work
    Day shift
    Afternoon shift
    3 days per week

    Manpower

    Fenton, MO
    2 days ago
  •  ...more than just a steel fabrication company—we’re a 100% employee-owned team driven by pride, precision, and performance. As a Mill Operator on 3rd shift (Sunday – Thursday, 9:00pm – 5:30am) you are at the heart of our steel mill, responsible for tasks related to the... 
    Suggested
    Flexible hours
    Shift work
    Night shift

    Trinity Products LLC

    Saint Charles, MO
    1 day ago
  • $30 - $38 per hour

     ...Job Description Job Description CNC Machinist Needed - Mills or Lathes or Swiss - Setup or Program Looking for Experienced Machine Operators familiar with one or more of the following:   CNC Mills, Lathes, CNC Rotary Transfer, Multi Spindles, Hydromat, Index... 
    Suggested
    Permanent employment
    Day shift
    Afternoon shift

    Dedicated Staffing

    Saint Louis, MO
    2 days ago
  •  ...Description Looking to work daytime hours in a clean, modern, and supportive manufacturing environment? We are seeking a CNC Mill Setup / Operator to join our growing team on 1st Shift. This role is ideal for a skilled CNC Machinist who can demonstrate proficiency in... 
    Suggested
    Day shift

    SR Precision Holdings LLC

    Lees Summit, MO
    20 days ago
  • $27 per hour

     ...Job Description Job Description Adecco is currently assisting a local Customer in their search for an CNC Mill Operator in Fenton, MO! This is a great opportunity to further your existing skills as an CNC Mill Operator while learning new ones to assist you in your... 
    Hourly pay
    Temporary work
    Local area
    Flexible hours
    Shift work
    Afternoon shift

    Adecco

    Fenton, MO
    4 days ago
  • $35 - $40 per hour

     ...Work with Metro Asphalt? Top Market Pay: We pay $35–$40/hr because we want the best operators in the KC metro. Premium Fleet: Run top-tier machinery, including Wirtgen milling equipment. Steady Local Work: Our project pipeline keeps our crews moving consistently... 
    Full time
    Seasonal work
    Local area

    Metro Asphalt Inc.

    Kansas City, MO
    19 days ago
  • $37.88 - $44.19 per hour

     ...and fittings Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems,...  ...computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape... 
    Hourly pay
    H1b
    Local area
    Work from home
    Relocation
    Flexible hours
    Shift work
    Night shift
    Weekend work
    Day shift
    Afternoon shift

    General Motors

    University, MO
    11 hours ago
  • $25 per hour

     ...processes and tool information. Train new employees to properly operate CNC swiss lathes and programs. Follow established processes and...  ...automated or automated tools and machines (swiss lathes, grinders, mills, etc.) Must have a positive attitude with a demonstrated ability... 
    Hourly pay
    Full time
    Apprenticeship
    Weekend work

    Burger and Brown Engineering

    Grandview, MO
    7 days ago
  •  ...for a machinist that knows their way around the world of manual mills, CNC machining center, manual lathes, manual drill presses,...  ...what it takes! Perform duties required for the set up and operation of manual mills, CNC machining center, CNC lathes, manual lathes... 

    Recruiting Module

    Augusta, MO
    5 days ago
  •  ...safer, cleaner, and more efficient across the entire value chain. Operating in more than 120 countries, the company blends deep industrial...  ...math and reading skills. Have working knowledge of lathes, mills, and other machine shop equipment. Have the ability to write... 
    Worldwide
    Flexible hours
    Shift work
    Weekend work

    Baker Hughes

    Liberty, MO
    5 days ago
  •  ...humility. Position Summary: Provides support for machining operations of products and assemblies using manual and/or CNC machine...  ...Mastery (Responsibility Matrix): Delivery: • Runs CNC machines, mills, drills, lathes, saws, shears, presses, punches and drill presses... 
    Temporary work

    Watlow

    Columbia, MO
    5 days ago
  • $45.11k - $58.65k

     ...skilled Machinist II to support prototype and job shop machining operations in Bridgeton, MO. This position is responsible for programming,...  ..., Mastercam, and Mazatrol to create machining programs for CNC mills and CNC lathes. Candidates must be able to read and interpret... 
    Full time
    Contract work
    Work experience placement
    Local area
    Flexible hours

    Leonardo DRS

    Bridgeton, MO
    7 days ago
  • $24.52 - $30.24 per hour

     ...Position Summary What you will do as a CNC Machinist is to setup and operate Computer Numerically Controlled (CNC) lathes and/or mills. Primarily responsible for setting up and operating equipment with some program editing and offsetting on a variety of parts. Responsible... 
    Temporary work
    For contractors
    Work at office
    Local area
    Shift work
    Afternoon shift

    STERIS

    Saint Louis, MO
    4 days ago
  •  ...Our CNC Mill Operator 2nd shift role is our entry role into machining and manufacturing with Burger & Brown Engineering, Inc. This role requires attention to detail, patience and thinking through the process and the end use of products to be successful. Job Duties... 
    Full time
    Apprenticeship
    Afternoon shift

    Burger and Brown Engineering

    Grandview, MO
    23 days ago
  •  ...U.S. Government, and their allies. Since 1950, we have proudly operated in St. Louis and McCay is committed to setting itself apart from...  ...to be the most relied on supplier. Job Title: CNC Lathe and Mill Machinist 2 Job Description: We are seeking experienced CNC Lathe... 
    Permanent employment
    Apprenticeship
    Local area
    Shift work
    Afternoon shift

    McCay Tool & Engineering

    Saint Louis, MO
    2 days ago
  •  ...the candidate have any planned time off during the next 90 days Roles & Responsibilities: Setup, layout and operate various CNC lathes and/or mills Reads blueprint or job order for product specifications such as dimensions and tolerances and tooling instructions... 
    Work experience placement
    Monday to Friday
    Flexible hours
    Shift work
    Day shift
    Afternoon shift

    Apidel Technologies

    Fenton, MO
    1 day ago
  • $24 - $29 per hour

     ...of the future of our company, you should consider a career with us. Job skills: - Ability to operate manual machines: Lathes, HBMs and Vertical Boring Mills. - Must be able to read and interpret blueprints. - Proven experience in measuring and recording dimensions... 
    Hourly pay
    Full time
    Work at office
    Relocation
    Shift work

    HANCO

    McDonald County, MO
    2 days ago
  •  ...will perform a variety of duties to support the manufacturing operations including, but not limited to, design/developing, building and...  ...manual and automated machines; lathes, bridgeports, grinders, edms, mills, welders. Ability to work independently and as a member of... 
    Contract work
    Apprenticeship
    Day shift

    MILLENNIUMSOFT

    Saint Louis, MO
    1 day ago
  •  ...Using conventional manual machines and tooling, e.g., Bridgeport mill, lathe, etc., fabricate parts and components to predetermined...  ...machines & tooling and plan the required sequence of machining operations to ensure part quality and maximum productivity. Set up machine... 

    ZZZDoNotUseAutomation Service

    Earth City, MO
    3 days ago
  •  ...Overview C.W. Roberts Contracting, Inc. (CWR) is a growing road construction company. We are seeking to fill a Milling Foreman for our local operations. Responsibilities Responsible for the efficient operations and effective coordination of all milling personnel, crews... 
    Local area
    Night shift
    Weekend work

    CWR Contracting, Inc.

    Wildwood, MO
    5 days ago
  •  ...Academy, Kohl’s, and Walmart. As an Aluminum Processing Machine Operator , you’ll work with specialized equipment to cut, punch, and...  ...Operate aluminum processing machines, including saws, punch presses, mills, or CNC equipment Load raw aluminum materials and run jobs... 
    Full time
    Temporary work
    Monday to Friday
    Shift work
    Day shift

    PFI Holdings LLC

    Washington, MO
    1 day ago
  •  ...individuals who all make an impact. As a Machinist, you will set up and operate conventional, special purpose, and numerical control (NC)...  ..., attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. * Calculate and set... 
    Flexible hours
    Day shift

    ASPEQ Heating Group

    Monroe City, MO
    2 days ago
  •  ...The Loader Operator will contribute to the production team to ensure goals are met safely and efficiently while conforming to company policies. Process vehicles in a safe manner to produce core & scrap products, enable the customers to pull parts, and satisfy environmental... 
    Local area
    Shift work

    Schnitzer Steel Industries Inc

    Kansas City, MO
    4 days ago
  • $45 - $50 per hour

     ...turnaround time matter. The CNC department works with a mix of Haas mills/lathes and older 3-axis routers used heavily for flat panels,...  ...equipment actually runs, troubleshoot at the machine, and help operators get good parts out the door. Key Responsibilities... 
    Full time
    Shift work

    CalTek Staffing , Inc.

    Wildwood, MO
    5 days ago
  •  ...manufacturing company in St. Joseph is seeking a skilled professional with 5-7 years of CNC milling experience to join their team. What You'll Do: Set up, program, and operate CNC milling machines Read and interpret blueprints and technical drawings Work... 
    Full time
    Local area
    Immediate start

    Express Employment Professionals Defunct

    Missouri
    5 days ago
  • $20.68 per hour

    CNC Machine Operator BH Job ID: BH-4309 SF Job Req ID: CNC Machine Operator Ingersoll Rand is an equal...  ...~ Set up, adjust, and operate machine tools (lathes, milling machines, etc.), selecting and securing appropriate tools, fixtures... 
    Monday to Friday
    Shift work
    Weekend work
    Day shift

    Ingersoll Rand

    Springfield, MO
    2 days ago
  •  ...SUMMARY: We are looking for a CNC Programmer to join our team. In this role you will program software to ensure our CNC and mill machines operate efficiently and produce quality products. At Addman you'll be part of a skilled and growing team pushing the limits of... 
    Full time
    Temporary work
    Work experience placement
    Relocation package
    Flexible hours
    Shift work

    ADDMAN ENGINEERING

    Wright City, MO
    2 days ago
  • $28 - $32 per hour

     ...Machinists to join their production team. In this position, you’ll operate CNC equipment to produce high-quality, tight-tolerance...  ...$5000 SIGN ON BONUS! Responsibilities include: Operate CNC mills and/or lathes to produce parts to documented requirements. Read... 
    Relocation package
    Shift work
    Night shift
    Day shift

    Manpower

    Saint Louis, MO
    1 day ago
  • $33.07 - $40.46 per hour

     ...Machinist with machining experience to support our stamping die operations. The Opportunity: Work with both manual and CNC machine...  ...up, operate, and disassemble manual and CNC machine tools like mills and lathes. Monitor machine speeds and operations to maintain... 
    Hourly pay
    16 hours
    Temporary work
    Apprenticeship
    Work at office
    Monday to Friday
    Shift work
    Night shift
    Afternoon shift

    ABB

    Saint Louis, MO
    4 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Mill Operator I. Be the first to apply!