MAINTENANCE MECHANIC

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position is to perform the full range of plumbing duties such as installing, repairing, and modifying water supply, sewage disposal, gas distribution, oil lines, and similar utility systems.

Learn more about this agency

Duties

Help

- Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders in the construction and maintenance of installation facilities. Reviews work order requirements reflecting structures and/or plumbing systems and equipment to be constructed, installed, modified, altered, or repaired. Visits worksite and analyzes, evaluates, and determines structural damage when planning repair and modification projects. Makes changes to job layout based on on-site inspection of job.

- Independently installs, modifies, repairs, and maintains a variety of new and existing utility, supply, and disposal systems and equipment, such as sewage, water, oil, and gas distribution systems, and water closets, tubs, backflow prevention devices/assemblies, fire sprinkler systems, and showers.

- Troubleshoots/tests various plumbing systems and equipment including backflow prevention devices, such as reduced pressure principle devices, double check devices, atmospheric vacuum breakers, and other cross connection devices. Tests and checks completed work for proper drainage, flow, and venting.

- Independently applies skilled methods, techniques, and advanced shop mathematics to construct, install, repair, and modify a wide variety of structures. Works on projects, such as building frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim, and other miscellaneous items.

- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing. Follows federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards. Uses and maintains tools.

Requirements

Help

Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Direct Deposit: All federal employees are required to have direct deposit.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver's license will be required for the position.
• Shift work may be required.
• Will be required to train/guide lower graded (or other trades) military/civilian employees.
• May be required to be certified for working with and/or removing hazardous material.
• The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
• Emergency overtime may be required.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial an periodic short notice drug testing.
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• The physical requirements of this position as determined by the manager are: Uses hand and power tools and equipment that may require standing and holding tools in uncomfortable positions for extended periods.
• The work requires considerable bending, kneeling, and stooping. On-site work typically requires crawling, climbing on ladders, scaffolds, and roof tops. The work may be at extreme heights (such as water towers or tall buildings).
• Strenuous physical exertion is sometimes required when handling heavy and bulky materials such as sheets of plywood and other construction materials. May lift and move materials up to 40 pounds, unassisted,
• and occasionally lift or move heavier items with the assistance of lifting devices or other workers.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance and Operations Work Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the ability to do the work of a MAINTENANCE MECHANIC without more than normal supervision.

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Knowledge of carpentry methods and techniques; precision carpentry equipment; and plumbing methods and techniques, equipment assembly, installation, operation, and repair to include routing, placement, slant, slope, and fall of systems.

2. Knowledge of safety regulations, practices, and procedures; regulations, procedures, and policies related to records maintenance and documentation; and current federal, state, and local regulations pertaining to hazardous waste management.

3. Knowledge of advanced shop mathematics to plan, compute, and lay out more complex and exact projects.

4. Skill in setting-up, operating, and maintaining a variety of power and hand tools/equipment.

5. Skill in measuring, cutting, bending, and threading pipe and tile, to caulk and seal elbows, union joints, faucets, and shower drains; constructing, installing, repairing, and modifying wood structures; and producing finished products with precise fits, accurate dimensions, and acceptable appearance.

6. Ability to install, modify, and repair new and existing utility, supply, and disposal systems and equipment without more than normal supervision; and interpret complex instructions, sketches, blueprints, and building codes.

Physical Effort:

Uses hand and power tools and equipment that may require standing and holding tools in uncomfortable positions for extended periods. The work requires considerable bending, kneeling, and stooping. On-site work typically requires crawling, climbing on ladders, scaffolds, and roof tops. The work may be at extreme heights (such as water towers or tall buildings). Strenuous physical exertion is sometimes required when handling heavy and bulky materials such as sheets of plywood and other construction materials. May lift and move materials up to 40 pounds, unassisted, and occasionally lift or move heavier items with the assistance of lifting devices or other workers.

Working Conditions:

Works inside shops and outside at job sites. In shops, is exposed to moderate or high noise levels from operating machinery, sawdust in the air, fumes, grease, and hazards associated with carpentry and plumbing trades. At job sites, may be exposed to weather conditions and hazards of working on and around scaffolds and ladders and are subject to cuts, bruises, and contusions; may occasionally be exposed to the possibility of broken bones. Has frequent exposure to the possibility of scrapes, burns, and infections. Occasionally makes repairs in areas where bad smelling fumes are present. May work in confined areas such as crawl spaces and attics that may be dusty and dirty. Uses protective devices such as ear plugs, safety glasses, respirators, safety shoes, hard hats, coveralls, gloves, rain gear, and other protective gear are required, which are sometimes heavy and uncomfortable.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Additional information

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.