Plasma Processing Technician
$18.98 - $22.46 per hourCSL
- In compliance with Standard Operating Procedures (SOPs), responsible for collecting plasma samples and moving plasma units to freezer to ensure product quality.
- Ensure plasma units are properly stored according to SOPs, which could include unsuitable plasma units and samples.
- Ensures accuracy of unit labeling by verifying the pre-printed label matches the dynamic label.
- Utilize sterile technique to draw samples and use heat sealer to assure the sterility and quality of plasma unit samples per SOPs.
- May ensure samples and units are packed and shipped in accordance with SOPs and center procedures. Prepares shipping and unit disposal documentation.
- Monitor freezer and refrigerator temperatures and immediately informs appropriate personnel if equipment is not functioning properly. Records variances.
- Conduct daily calibration of equipment according to SOPs.
- Ensure the accurate recording of donor data in the electronic donor information management system as outlined in the SOPs.
- Understand the policies and procedures associated with hyper immune programs at the center if applicable.
- Maintains clean efficient work environment, and ensures sufficient operating supplies and forms are available as needed. Follows all Health Safety & Environmental (HSE) and Occupational Safety and Health Administration (OSHA) policies and procedures. Promotes safety in all actions.
- Maintain confidentiality of all personnel, donor and center information.
- May be cross-trained in other areas to meet the needs of the business.
- Bilingual skills may be required, at the discretion of the organization, to meet the needs of the business.
- Perform other job-related duties as assigned.
Your skills and experience
Education
High school diploma or equivalent required
Experience
- Minimum of three (3) months experience in laboratory or warehouse environment preferred or equivalent combination of education and experience
- Will perform basic math calculations
(NON-EXEMPT) The expected base pay for this position at hiring is $18.98/hour - $22.46/hour. Please note this wage range reflects what CSL expects to pay for this position at the listed location as of the time of this posting. Individual base pay for a successful candidate within this range is determined by qualifications, skill level, experience, competencies and other relevant factors.
#J-18808-Ljbffr- CSL is seeking a commitment-focused individual to support plasma collection and storage operations at our Sacramento center. You will collect plasma samples, ensure proper labeling, and transport units to freezers per SOPs, maintaining sterility with heat sealing equipment...Suggested
$28 - $32 per hour
Gaveyard Semiconductor Engineering Process Technician needed for an 18-month contract to hire opportunity with Yoh’s client located in Santa... ...FIB/TEM system, perform routine maintenance procedures, flash, plasma clean, image calibrations etc. Perform routine shut down...SuggestedHourly payContract workShift workNight shiftWeekday work$35 - $38 per hour
Job Description Job Description Process Technician - Baldwin Park, CA Pay: $35.00 - $38.00/hour Schedule: Monday - Friday | 7:00 AM - 4:00 PM About the Opportunity We are seeking an experienced Process Technician to join a growing medical device manufacturing team....SuggestedWork at officeMonday to Friday- Kelly Services in Baldwin Park, CA seeks an experienced Process Technician to support injection molding in a medical device manufacturing setting. You will execute process development, engineering runs, and validation runs while documenting results and optimizing processes...Suggested
- The eDiscovery Processing Technician supports legal teams by managing the intake, processing, and organization of digital evidence. This entry-level role is ideal for a detail-oriented professional seeking to build expertise in data management workflows within a high-stakes...SuggestedInternshipLocal area
$26.47 - $43.62 per hour
...including medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. The role involves processing mail, including sorting and preparing mail for shipment to the next destination, #J-18808-Ljbffr US Postal ServiceHourly pay$20 - $30 per hour
...possible in typical positions. Position Description Work Location: 20162 Windrow Dr, Lake Forest, CA 92630 The Injection Molding Process Technician | Plastics Manufacturing supports polymer injection molding operations at Applied Medical by performing equipment setup,...Work at officeLocal areaShift work$26.47 - $43.62 per hour
United States Postal Service in California is hiring for a Postal Mail Processor position. No experience is required and paid training is provided, offering job security in a government-backed role. Starting pay ranges from $26.47 to $43.62 per hour, with an average annual...Hourly pay- Sysco Newport Meat Southern California is seeking a Meat Utility to support production operations in a refrigerated processing environment. You will open meat, de-box, and move products through the production area, with basic equipment operation and occasional sanitation...
- ...responsible for general support functions within the Specimen Processing Department. This position requires a data entry background.... ...environment preferred. Phlebotomist Phlebotomy Phlebotomist Technician Phlebotomy Technician Mobile Phlebotomist Medical Assistant Technician...Temporary workWork experience placementMonday to FridayShift workNight shiftWeekend work
- Sierra Wireless in Rowland, CA, is seeking a Wafer Fab Process Technician to run volume production for InP BH DFB laser and BH GC devices, ensuring process stability, mask and passivation steps, and high-yield manufacturing in a cleanroom environment. The role emphasizes...
- ...seeks a Chemical Processor for the 2nd shift in City of Industry, CA. It is an on-site, full-time hourly role performing secondary processing and wastewater treatment operations to support manufacturing. Responsibilities include degreasing, lube, etch, anodize, chromate...Hourly payFull timeAfternoon shift
- ...of Industry, CA is seeking a hands-on manufacturing worker for on-site, full-time roles. The position includes operating secondary processes and wastewater treatment systems, following production schedules, and ensuring safe, efficient operations. The role requires a...Hourly payFull timeAfternoon shift
- Snap-On Tools seeks a Quality Technician to perform receiving, in-process, first article, and final inspections to ensure materials and finished products meet specifications and ISO requirements. This role supports the QMS by documenting results, identifying nonconformances...
$130k - $165k
...organizational leadership across Manufacturing Engineering, with primary responsibility for New Product Introduction (NPI), manufacturing process development, continuous improvement, Root Cause and Corrective Action (RCCA), and the engineering systems and manufacturing data...Hourly payPermanent employmentFull timeTemporary workWork at officeWorldwide- R&D Partners is hiring a Manufacturing Technician for our Los Angeles, CA site. You will set up and operate equipment in a biologics processing environment for plasma-derived pharmaceuticals, while strictly following FDA-regulated procedures and maintaining thorough documentation...Night shift
$36.61k - $45.76k
R&D Partners is seeking to hire a Manufacturing Technician in Los Angeles, CA. Your main responsibilities as a Manufacturing... ...for equipment setup and operation in a biologics processing environment for plasma derived pharmaceuticals. Strict adherence to procedures...Shift work- ...Manufacturing Engineering is a hands-on leadership role and the process authority for how Butcher Power Products’ switchboard and... ...Teaching: Coach, train, and develop manufacturing engineers and technicians in process design, tooling, DFM/DFA, Lean and Six Sigma, time...
$23.4 - $31.66 per hour
...teams, you will play a critical role in ensuring product quality, process efficiency, and continuous improvement across our operations.... ...knowledge of CNC programming. Training as a machining technician, machine operator, or lathe operator is required. Candidate should...Hourly pay$27 per hour
...team, and plant meetings during their scheduled times Measure and continuously improve the line operation as a team and with other technicians Cross-train in other areas to support operations during downtimes Maintain your workstation in an organized and clean manner...Hourly payPermanent employmentSeasonal workLocal areaShift workWeekend work$25.55 per hour
...Production Technician IThe Production Technician I is responsible for monitoring Keurig Dr Pepper's production processes, including operating manufacturing equipment and maintaining compliance with Keurig Dr Pepper's high standards for safety and quality. This role will...Hourly payShift workWeekend work- ...JOB BRIEF The Production Technician is responsible for assembling, testing, and inspecting industrial computers, electronic components, and related products to ensure they meet quality standards and product specifications. This role works closely with Quality Assurance...
- ...Production TechnicianThis Production Technician will perform a variety of assignments within a manufacturing environment. These assignments... ...work instructions. - Required to identify and implement process improvement projects using Lean techniques. - Responsible to ensure...Immediate start
$25.55 per hour
...Production Technician IThe Production Technician I is responsible for monitoring Keurig Dr Pepper's production processes, including operating manufacturing equipment and maintaining compliance with Keurig Dr Pepper's high standards for safety and quality. This role will...Hourly payShift workWeekend work- ...POSITION SUMMARY At SD Pantry, a Manufacturing Technician will produce, finish and package all cannabis-infused products such as edibles ranging from caramel corn, gummy candies, chocolates to rice crispy treats along with canna-butter concentrates. Manufacturing...Monday to FridayShift work
$27 per hour
...and plant meetings during their scheduled times Measure and continuously improve the line operation as a team and with other technicians Cross-train in other areas to support operations during downtimes Maintain your workstation in an organized and clean manner...Hourly payPermanent employmentSeasonal workLocal areaShift workWeekend work- Roles and Responsibilities: Partner with Manufacturing and R&D to implement and optimize manufacturing processes. Support technology transfer from Product Development into Manufacturing. Troubleshoot manufacturing equipment and resolve process-related issues. Improve processes...
- Katalyst-Healthcares- is seeking a Manufacturing/Process Engineer to partner with Manufacturing and R&D to optimize processes and support tech transfer from product development into manufacturing. The role emphasizes troubleshooting equipment, improving filtration-related...
- ...Packaging Corporation in California is seeking a maintenance technician to diagnose and repair mechanical, electrical, hydraulic, pneumatic, and PLC systems across plant equipment. The role emphasizes rapid response to downtime, adherence to safety policies, and ongoing...
- ...Packaging Corporation of America (PCA) is seeking a maintenance technician in California to diagnose, repair, and maintain plant equipment across mechanical, electrical, and PLC systems. The role emphasizes safety, reliability, and proactive downtime reduction, with opportunities...Shift workWeekend work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Plasma Processing Technician. Be the first to apply!
- process development technician Sacramento, CA
- injection molding process technician Sacramento, CA
- process technician Sacramento, CA
- process engineering manager Sacramento, CA
- manufacturing engineering manager Sacramento, CA
- biowork process technician
- process development technician
- injection molding process technician
- process technician
- surgical processing technician



