Equipment Processing Technician
$19 per hourAgiliti Health, Inc.
The Equipment Processing Technician is responsible for processing and inspecting medical equipment, including disassembling and reassembling it and processing and managing the associated accessories, in a district office. The Equipment Processing Technician also is responsible for the entry of data associated with these tasks.
Shift: Monday-Friday, 10:00am-6:30pm. Holidays/weekends occasionally required. $19/hr + full benefits. Knowledge and Physical Requirements- High school diploma or equivalent.
- Prior work experience in hospital setting or customer service preferred.
- Basic computer skills.
- Willing to work flexible hours, including evenings, weekends and holidays, as well as emergency off-hours as required.
- Able to lift and/or push 75 pounds.
- Able to stand for long periods of time.
- Possesses quality orientation with a "get it right the first time" attitude.
- Complies with patient privacy laws in all matters.
- Flexible, coachable.
- Demonstrates strong communication skills (listening, writing and speaking).
- Demonstrates team orientation and shows respect for others.
- Proactive and self motivated.
- Organized; prioritizes to meet deadlines.
- Able to work with very little supervision.
- Operates with a proactive approach towards safety, health and quality in compliance with all company, governmental and customer policies and regulations.
- Maintains a clean and safe work environment.
- Customer-focused; willing to go above and beyond.
- Completes all paperwork and data entry accurately and in a timely manner.
- Stays up to date on the medical equipment in the fleet.
- Cleans and inspects medical equipment for functionality, following approved written procedures.
- Demonstrates attention to details.
- Ships and receives medical equipment and supplies.
- Assists with inventory management.
- Performs other assigned duties.
Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact View email address on click.appcast.io. Primary Job Location: Philadelphia District Additional Locations (if applicable): Job Title: Equipment Processor I Company: Agiliti Location City: Mt. Laurel Location State: New Jersey Pay Range for All Locations Listed: $15.22 - $23.15 This range represents the low and high ends of the Agiliti pay range for this position. This base pay range information is based on the market locations shown. For sales positions, this range combines the base salary and the target incentive pay. The actual pay offered may vary depending on several factors including geographic location, experience, job-related knowledge, skills, and related factors. Dependent on the position offered, short-term and/or long-term incentives may be provided as part of the compensation. Applicants should apply via Agiliti's internal or external career site.
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the Equipment Processing Technician in Laurel, MD vacancy
$19 per hour
...The Equipment Processing Technician is responsible for processing and inspecting medical equipment, including disassembling and reassembling it and processing and managing the associated accessories, in a district office. The Equipment Processing Technician also is responsible...SuggestedDaily paidFull timeTemporary workWork experience placementWork at officeLocal areaMonday to FridayFlexible hoursShift workAfternoon shift- ...The Diesel Mechanic will maintain production and quality by ensuring operation of construction vehicles, machinery and mechanical equipment. Job Duties: As a Diesel Mechanic, you will handle repairs on engines, drive trains and truck chassis. Also you will...Suggested
- ...Job Description Job Description Description: Oneida Professional Services is seeking a Broadcast Equipment Technician to support the Defense Information School (DINFOS) Technology & Logistics Support Services contract at Fort Meade, Maryland. This position is responsible...SuggestedContract workWorldwide
- Konica Minolta is seeking an IIM BPO Senior Production Technician in Fulton, MD. The role entails advanced production tasks including document prep, scanning, QC/QA, and indexing, with potential coaching of new hires within assigned projects. Essential duties cover maintaining...Suggested
$35 per hour
...Equipment Maintenance Technician Up to $35/hr depending on experience Build Something Better with Renuity As a Equipment Maintenance Technician... ..., and you need an accommodation during the application process or to perform these job requirements, or if you need a...SuggestedFull time$35 per hour
...Equipment Maintenance TechnicianUp to $35/hr depending on experienceBuild Something Better with RenuityAs a Equipment Maintenance Technician, you'll keep our manufacturing facility running by maintaining, troubleshooting, and repairing CNC (Computer Numerical Control)...$27 - $30 per hour
...Piper Companies is currently looking for a Manufacturing Process Technician I in the Howard County, MD area to work a fully onsite role. This... ..., sterilize, stage, and manage materials, consumables, and equipment required for production operations. Perform equipment setup,...Hourly pay$25 per hour
...Description Reeder Distributors, Inc. is seeking a dependable Equipment Installation Technician to join our team. In this role, you will install,... ...with disabilities throughout the application and interview process. To request accommodation, please contact . Disclaimer: The...Hourly payWeekly payFull timeMonday to FridayShift workNight shift- ...inventory squared away What you’ll fix Commercial cooking equipment (e.g., Henny Penny, Garland Grill, Hobart mixers, Champion... ...or more: sealed refrigeration/HVAC, electrical, mechanical, process controls, hot-side equipment and/or mechanical power transmission...Full timeLocal areaVisa sponsorshipWork visaNight shift
- ...consistently achieve production and cost targets minimizing waste and downtime, through effective management and upkeep of the processes, teams and equipment, so as to ensure that we achieve customer service level with our customers, through the manufacture of products to the...Full timeShift work
- Tech24 in Baltimore, MD is seeking a Foodservice (Hot-Side) Technician to diagnose, maintain, and repair commercial cooking equipment at customer locations. You will work independently in the field to ensure safe, efficient operation and minimize downtime while delivering...Weekly pay
- ...candidates for potential openings.* Description Install, set-up, rearrange, or remove switching, distribution, routing, and dialing equipment used in central offices or headend. Service or repair telephone, cable television, Internet, and other communications equipment on...Full timeContract workWork at office
- Piper Companies is seeking a Manufacturing Process Technician I in the Howard County, MD area for a fully onsite role. The technician will support aseptic processing, cell culture, filtration, purification and fill-finish activities in a GMP-regulated cleanroom environment...
$30 - $50 per hour
...oriented and experienced Semiconductor/MEMS Fabrication Technician to support our microfabrication operations. In this role... ...environment, operating a wide variety of semiconductor processing and metrology equipment. In addition, candidate will execute critical process steps...Full timeFor contractorsLocal areaMonday to Friday- ...construction quantities and verify for the installed quantity. Perform Quality Assurance on the installed materials Review and Process contractor's monthly payment estimate, Monitor construction schedule and address any deficiencies with the Construction Manager/...Temporary workFor contractors
- Job Duties Some of the major duties you will perform include but are not limited to the following: Routine maintenance and upkeep of grounds and facilities. Build wooden structures for research needs. Operate, service, and perform simple repairs to small engines...
$35.5 - $37.5 per hour
...specifications Recommend adjustments to the assembly or installation process Inspect, identify, and submit material, components, or... ...for testing and measurement Operate electronic inspection equipment and software Document approval or rejection of inspected...Contract workImmediate startRelocationAll shifts$19.09 - $28.61 per hour
...please visit JOB SUMMARY This is an Operations position responsible for checking oil, fluids, tire pressure and fueling all equipment. RESPONSIBILITIES Fuel every piece of delivery equipment daily. Check all fluid levels of power equipment daily....Local areaWorldwideNight shift$51k - $82k
...Facilities Maintenance Technician Job Locations US-MD-Annapolis Junction... ...closures: decommissioning of furniture and equipment, asset disposition, records handling, vendor... ...and small-purchase procurement processes. Experience in a government contracting...Contract workTemporary workCasual workWork at officeRelocationShift workAfternoon shift$35 per hour
...Refrigeration Technician (Temp-to-Perm)Schedule: Monday-Friday, 7:00 AM-5:00 PMSchedules are... ...Type: Temp-to-PermInterview Process: In-Person InterviewsPosition SummaryWe... ...refrigeration systems, freezer and cooler equipment, HVAC systems, and related facility infrastructure...Permanent employmentTemporary workCasual workMonday to FridayWeekend work- ...Facilities Maintenance Technician Capitol Technology University seeks a hands-on Facilities Maintenance Technician to join our Facilities... ...filter replacement, basic troubleshooting, thermostat and equipment checks, minor component replacement where appropriate, and...Full timeFor contractorsSeasonal workRelocationShift workWeekend workAfternoon shift
- ...Job Summary The Production Technician III role is essential for supporting the operations... ...and preventive maintenance on production equipment throughout the facility. Perform 5S and... ...predictive maintenance tasks on production and process utility equipment to increase quality,...Work at officeNight shiftAfternoon shift
- ...currently has an exciting opportunity for an IIM BPO Production Technician! The IIM BPO Production Technician is responsible for accurate... ...all staples, clips, post it notes, etc. from documents to be processed.Repair any torn documents with tape.Accurately and legibly...For contractorsCurrently hiringWork at office
- ...currently has an exciting opportunity for an IIM BPO Production Technician! The IIM BPO Production Technician is responsible for... ...all staples, clips, post it notes, etc. from documents to be processed. Repair any torn documents with tape. Accurately and legibly...For contractorsCurrently hiringWork at office
$120 per day
Hello! My name is Sophia, and I'm a homeowner located in Jackson Township, New Jersey. I am looking for a responsible and caring house sitter to help me while I'm away. The primary responsibilities will include pet feeding to ensure my furry friends are well taken care...Daily paidExtra income- ...adjustments to products, instruments, or equipment. Determines and may assist in developing... ...to control or modify the manufacturing process. Works with engineers in conducting experiments... ...Seeking candidates to fill a Mechanical Technician position for our Beltsville, MD facility...Flexible hoursShift workDay shift
- Innovative Consulting & Management Services (ICMS) is seeking dependable Maintenance Trades Helpers to support skilled personnel in the operation, repair, and upkeep of building systems and facilities in Beltsville, MD. You will assist with preventive maintenance, organize...
$60 per hour
...Job Description Job Description Are you a skilled Industrial Ammonia Refrigeration Technician looking for an exciting opportunity? At IHG Mechanical, we are seeking a full-time technician to join our team in Laurel, Maryland. As part of our team, you'll work in...Full timeMonday to FridayFlexible hours- ...Job Description As a Geek Squad Advanced Repair Technician (Agent), you’ll work at our local Best Buy store to provide technology support and repair customers’ computers and other devices. You’ll provide excellent customer experiences by listening to their needs...Hourly payFull timePart timeLocal areaWork from homeFlexible hoursNight shift
$40.68 per hour
...Machinery Maintenance Mechanic repairs machinery and mechanical equipment primarily used for classified material conversion (CMC)... ...adjusts meters and gauges to make sure that plant equipment and processes are working properly. Replaces broken or defective parts with...Contract workFor contractors
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Equipment Processing Technician. Be the first to apply!
Related searches
- commercial food equipment service technician Laurel, MD
- equipment Laurel, MD
- medical equipment Laurel, MD
- equipment rental Laurel, MD
- equipment sales Laurel, MD
- restaurant equipment Laurel, MD
- work from home equipment provided Laurel, MD
- fire equipment Laurel, MD
- equipment associate Laurel, MD
- quality equipment Laurel, MD





