Welder - Manufacturing
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Welder - Manufacturing in Somerdale, NJ vacancy
- ...Welder PositionWastequip Steel Division has an immediate opportunity for a welder to support our Erial, NJ manufacturing operation. The ideal candidate will be a MIG welder with prior experience in a manufacturing environment.Hourly Rate: $23.74Shift Hours: 6:00AM-4:3...SuggestedHourly payTemporary workImmediate start
$50k - $100k
...Assembler III / Certified WelderAssembler III / Certified Welder is responsible for fabricating component parts or assembling the finished product according to the customer's specifications. Secures and maintains correct component parts and supplies required for the operation...SuggestedHourly payShift work- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...Job Description Job Description RSC is looking for multiple pipe welders who can pass a 6G Stainless TIG test. Pay starts at 40/hr and has opportunities for advancement into lead roles. We are able to test ASAP and get a start date lined up ASAP. Please submit...SuggestedImmediate start
- Job Description Job Description Description: Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and ...SuggestedFull timeRemote workFlexible hours
$20 - $30 per hour
...Job Description Job Description Welder/Fabricator Shifts: ~1st ~2nd ~3rd Pay: ~$20-30/hr. Description: ~ Cannonball Recruiting is seeking skilled Welder/Fabricators . The ideal candidate will be responsible for fabricating, assembling, and...Weekly payShift work$21 - $34 per hour
...Job Description Job Description We are hiring a Welder/Metal Fabricator for their Metal Fabrication company. The Welder/Metal Fabricator will be involved in all parts of the fabrication process, from raw material to finished product. This is a Temp to Perm opportunity...Permanent employmentTemporary workMonday to Friday- Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleCasual workWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
$28 per hour
...Job Description Job Description Structural Steel Welder Pay: $28+/hr. (depending on experience) Shift: Days, Flexible on... ...cranes, and other material handling equipment in a fast-paced manufacturing environment. Requirements: Structural Steel welding...Flexible hoursShift workDay shift- Job Description Job Description Build More Than Projects. Build Your Career. FMA Contracting & Mechanical Construction Inc. is looking for experienced commercial and industrial professionals who take pride in their work and want to grow with a company that's ...Weekly payFull timeShift work
$20.66 per hour
Job Description Wastequip has an immediate opportunity for a Fabricator to support our Erie, NJ manufacturing operation. This is a full-time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much more....Hourly payFull timeTemporary workImmediate startFlexible hoursShift work- ...Requirements: A welder will perform all tack welding—this is a true pipefitting position, not a pipe welding role. Experience fitting stainless steel and carbon steel pipe. Must be able to perform pipe and spool fit-up. Must be able to calculate takeoffs and measurements...
$20.66 per hour
Job Description: Wastequip has an immediate opportunity for a Fabricator to support our Erial, NJ manufacturing operation. This is a full-time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much more...Hourly payFull timeTemporary workImmediate startMonday to FridayFlexible hoursShift work- DAC Worldwide, part of the Amatrol family, is seeking a skilled Machinist/Fabricator in New Jersey to produce high-quality components for training equipment. The role emphasizes hands-on work, reading blueprints, and maintaining quality while collaborating with a supportive...WorldwideRelocation packageMonday to FridayDay shift
- ...materials for fabrication. Inspect parts and assemblies to ensure quality standards are met. Identify, troubleshoot, and correct manufacturing defects. Fabricate jigs, fixtures, and production aids as needed. Maintain a clean and safe work environment. Work...Temporary workWork experience placementWorldwideRelocation packageMonday to FridayWeekend workDay shift
- Bentley Truck ServicesBentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we now span the entire eastern seaboard with 11 state of the art locations offering commercial truck sales, commercial truck...Contract workLocal area
$28 - $34 per hour
Bentley Truck Services Bentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we now span the entire eastern seaboard with 11 state of the art locations offering commercial truck sales, commercial ...Contract workLocal area- Process Piping and Instrumentation Design Technician WSP is initiating a search for a Process Piping and Instrumentation Design Technician. The candidate will be involved in projects with our Power Generation Team and will be part of a growing organization that meets our...
$21 - $30 per hour
...Seniority level Seniority level Entry level Employment type Employment type Full-time Job function Job function Management and Manufacturing Industries Industrial Machinery Manufacturing Referrals increase your chances of interviewing at Xylem by 2x Get notified about...16 hoursFull time- ...contributing to a better future through plant‑based food our top priority. Position Summary: This role is a key position within our manufacturing plants and supports our production team leads as they drive production to the highest safety, quality and efficiency standards...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder - Manufacturing. Be the first to apply!


