Motor Control Technician
$20 - $23.5 per hourSulzer USA, Inc.
Electrical Control Panel Assembler
Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.
About the Role
Under indirect supervision and following JWCE's Standard Operating Procedures, assembles and wires electrical motor control panels, enclosures, and related control assemblies. Reads and follows electrical schematics, wiring diagrams, mechanical layouts, bills of material, and work instructions to complete assigned work safely, accurately, and to established quality and production standards and finally assist in system testing when required.
Principal Duties and Responsibilities:
- Performs essential wiring of control panels used in monitoring and controlling electric motors & hydraulic power packs.
- Performs final quality assurance of all series controls in accordance with company practices, and UL, NEMA, NEC and CSA requirements.
- Assists QA technicians with basic inspection and testing of all model control panels.
- Adheres to safety standards of facility.
- Performs other duties and special projects as assigned.
- Must be able to lift up to 50lbs.
- Must be able to stand for extended periods of time.
- Assemble electrical control panels and enclosures according to mechanical layouts, electrical drawings, schematics, and work instructions.
- Install DIN rail, wire duct, terminal blocks, circuit breakers, relays, contactors, power supplies, disconnects, transformers, PLC/I/O components, and other electrical components.
- Measure, mark, drill, tap, cut, and prepare panels and enclosures for component installation when required.
- Cut, strip, terminate, label, and route wires according to electrical drawings and company workmanship standards.
- Perform proper wire crimping, ferruling, lug installation, and terminal connections using the correct tooling.
- Verify components and materials against the BOM, pick list, drawings, and job documentation before and during assembly.
- Identify and report missing, damaged, incorrect, or nonconforming components and drawing discrepancies.
- Perform basic point-to-point and continuity checks as required.
- Inspect completed work for workmanship, wire routing, labeling, component placement, and general conformance to drawings.
- Make approved wiring or assembly corrections identified during inspection or testing.
- Maintain accurate job documentation and record completed work as required.
- Follow established procedures for quality, safety, ESD, tool control, and material handling, as applicable.
- Maintain an organized and clean workstation using established housekeeping/5S practices.
- Properly care for hand tools, power tools, crimpers, torque tools, and test equipment.
- Work with other assemblers, technicians, engineering, quality, and supervisors to resolve production issues.
- Support department production schedules and communicate problems that may affect job completion.
- Assist with training new employees on basic assembly practices, workmanship standards, safety procedures, and shop processes when needed.
- Perform rework and modifications according to approved drawings or instructions.
- Perform other related duties and special projects as assigned.
Experience, Education & Skills:
Required: High School Degree
Desirable: 2-year Vocational Certificate in HVAC, Electrical, or Electronics is a plus.
- Previous electrical control panel assembly, electrical wiring, or related manufacturing experience is preferred. Equivalent hands-on technical training may be considered.
- Ability to read and follow electrical schematics, wiring diagrams, mechanical layouts, bills of material, and written work instructions.
- Basic knowledge of common electrical control components and their purpose is preferred.
- Ability to safely use standard panel-shop tools, including wire strippers, cutters, crimpers, ferrule tools, torque tools, drills, taps, and other basic hand or power tools.
- Ability to use a digital multimeter for basic continuity and point-to-point verification when trained and authorized.
- Basic understanding of wire sizes, terminal connections, component identification, and electrical control circuits.
- Ability to recognize and communicate material, drawing, wiring, and assembly discrepancies.
- Strong attention to detail, quality, and workmanship.
- Ability to follow instructions, work independently on assigned tasks, and cooperate effectively with the production team.
- Willingness and ability to assist with training new employees when needed.
- Ability to use wire strippers, crimpers, ferrule tools, torque tools, drills, taps, and other standard panel-shop tools.
- Basic understanding of wire gauges, terminal connections, component identification, and electrical control circuits.
- Ability to use a digital multimeter for basic continuity and point-to-point verification.
- Ability to follow written work instructions and established workmanship standards.
- Strong attention to detail and ability to recognize drawing, material, and assembly discrepancies.
- Ability to work independently while also supporting team production requirements.
- Willingness and ability to assist with training new employees when necessary.
Decision Authority:
Basic Function:
Work is performed within established drawings, procedures, work instructions, safety requirements, and departmental guidelines. The employee is expected to stop and seek clarification when drawings, materials, instructions, workmanship requirements, or safety conditions are unclear or appear incorrect. Changes to approved designs or specifications require authorization from the appropriate supervisor, Engineering, or Quality function.
Measured by: (key performance managements)
- Quality and accuracy of completed assemblies
- Adherence to drawings, work instructions, and workmanship standards
- Productivity and ability to meet scheduled production requirements
- Number and severity of assembly-related defects or rework
- Safety compliance
- Attendance and dependability
- Proper documentation and job reporting
- Organization and housekeeping of assigned work area
- Teamwork and communication
Physical and Work Requirements Ability to stand and work at an assembly station for extended periods. Ability to lift and carry up to 35 pounds. Use appropriate material-handling equipment or team lifting for heavier or awkward items. Ability to perform repetitive hand and arm movements associated with wiring, fastening, crimping, drilling, and assembly work. Ability to safely use required PPE and work around typical manufacturing and panel-shop hazards. Employees may perform only energized electrical testing or other specialized testing for which they have been trained and authorized.
What We Offer You
$20.00 - $23.50
- 15 days of paid time off and 12 company-paid holidays
- 401k plan with a 6% match
- Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability
- Health savings account matching
- Motivating wellness program
- Employee Assistance Program
- Paid paternal leave
- Gym reimbursement
Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.
We are proud to be recognized as a Top Employer 2026 in Brazil, Canada, China, Finland, Germany, Ireland, Mexico, Switzerland, South Africa, the UK and the USA.
Sulzer USA, Inc.$4,794 - $6,002 per month
...Senior Motor Vehicle TechnicianDepartment of Motor Vehicles$4,794.00 - $6,002.00 per... ...field office, the Senior Motor Vehicle Technician (SMVT) is a lead technician for the performance... ..., applicants must indicate the Job Control/Code (JC) number and position number(s)...SuggestedFull timeWork at officeRelocation$796 per month
...with the ability to understand customer needs and expectations. ~ Valid driver's license and use of a validly registered and insured motor vehicle required. ~ Knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based...SuggestedHourly payTemporary workLocal areaVisa sponsorshipWork visa- ...with the ability to understand customer needs and expectations. Valid driver’s license and use of a validly registered and insured motor vehicle required. Knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications....Suggested
$25 per hour
...TechnicianBluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,... ...pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment...SuggestedHourly payFull timeTemporary workWork at officeLocal areaNight shift- ...steering systems, transmissions, wheels, hubs, and bearings. Replace, install frame components and basic diagnose of electronic control systems. Replace, install, service and diagnose charging systems, clutches and drive lines, and...SuggestedLocal areaShift work
$54.44k - $72.88k
...Automotive Technician Crevier BMW, located in Santa Ana, CA has immediate opportunities for technicians to become part of the BMW Family... ...with Center and Factory standards. Performing Quality Control checks for repaired vehicles to ensure repairs are complete....Immediate start$20 - $40 per hour
ROLE : MASTER AUTOMOTIVE TECHNICIAN Location : La Habra / Brea / Orange, California (Onsite — LOCAL CANDIDATES ONLY) Compensation : $20... ...electrical repairs Mentor junior technicians and ensure quality control Qualifications ASE Master Technician certification preferred 5...Local areaRelocation$20 - $30 per hour
...exterior equipment and parts. Installation of specialized emergency vehicle Lightbars, Emergency lighting, Push Bumpers, Sirens, Controllers, Speakers, Computers, Intercom Systems. Attention to detail as it relates to job progress and tracking of hours....Hourly payFull timeMonday to Friday$25 - $35 per hour
...DN a place where people want to work, achieve excellence, remain curious and humble, and build lifelong relationships. Diesel Technician / Mechanic Diesel Technician / Mechani c - Join the leader in the compact construction equipment industry. Bobcat of is...Full timeMonday to FridayFlexible hours- ...is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved...Full timeApprenticeshipWork experience placement
- ...Commercial Truck Technician We are seeking skilled and dedicated Commercial Truck Technicians to join our team! The ideal candidate will have experience servicing various types of medium duty commercial vehicles and possess a strong mechanical knowledge base. Responsibilities...Full timeImmediate start
$28 - $40 per hour
Waste Management is seeking Diesel Mechanics to inspect, maintain, and repair diesel-powered garbage trucks and heavy equipment used for waste collection operations. Diesel Mechanics are responsible for diagnosing mechanical issues, performing preventative maintenance, ...Hourly payFull timeRelocation packageShift workNight shiftAfternoon shift- ...nation's Veterans by offering career opportunities that value military training, discipline, and technical expertise. As a Diesel Technician, you will leverage the skills acquired during your military service to diagnose, repair, and maintain diesel engines and heavy-...
- ...nation's Veterans by offering career opportunities that value military training, discipline, and technical expertise. As a Diesel Technician , you will leverage the skills acquired during your military service to diagnose, repair, and maintain diesel engines and heavy-...
- Job Description Job Description Most people don't think much about their vehicle until something goes wrong. That's where we come in. Whether you're helping customers, servicing vehicles, leading a team, or supporting operations behind the scenes, you'll play...Temporary workFlexible hours
$30 - $38 per hour
...exceptional care we bring together highly trained veterinarians technicians and teammates committed to our patients well-being. We... ...cleaning and supply restocking. Perform routine equipment quality control checks as directed and report any concerns or calibration...Local areaShift workNight shift$21 per hour
Vehicle Service SpecialistAre you looking to reach your full potential? Do you enjoy meeting new people and working in a team environment? Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley...Full timePart timeFlexible hoursAfternoon shift$16 - $20 per hour
Water Damage Restoration TechnicianCompensation: $16.00 - $20.00 per hourBuilt on a foundation of great brands and employees with a passion for service, our vision is to be the leading provider of essential services through empowered people, world-class customer service...- Job Details Job Location: Del Amo Motorsports of Orange County - SANTA ANA, CA 92705 Salary Range: $17.00 - $18.00 Base+Commission/month Del Amo Motorsports is a leading Powersports dealership in Southern California within 5 locations in Orange County, Los Angeles...
$22 - $30 per hour
...Job Description Job Title: Master Automotive Technician Job Type: Full-Time Location: ~ Orange, CA 92865 Work Hours: Mon - Fri 8AM - 5PM Sat 8AM - 4PM Sunday Closed Pay: $22-30/hr + bonus Performance-based bonus $1500-7k / month...Hourly payFull time$38.34 per hour
Now Hiring: Automotive Master Technician Location: 100% Onsite in Fountain Valley, CA Pay Rate: $38.34/hour Ready to put your advanced automotive diagnostic and repair expertise to work in a hands-on engineering environment? We are seeking an experienced Master...For contractorsWork at officeLocal areaImmediate start$15 - $25 per hour
...you spend your time on the thinking, problem-solving, and client service that matter most. The result is more flexibility and more control over how you get the work done. Rewarded efficiency. Bonus compensation recognizes the results you deliver. Independence and...Hourly payPart timeFlexible hours$16.5 - $27.02 per hour
...Perform job duties of all lower job descriptions (General Service Technician). Adequately explain technical diagnoses and needed repairs... ..., bending, stooping, kneeling, twisting. Possesses fine motor skills to safely operate tools. Climb up and down ladders to...Hourly payPrice workFull timeTemporary workPart timeNight shiftWeekend work$90k - $150k
...Master TechnicianEarn $90,000–$150,000 a year at our Tustin Midas — we're hiring a Master Technician. At Midas, we take care of everything — tires, brakes, oil — so the opportunities to grow are endless. We're the #1 retail tire and auto service franchise in the country...- ...Perform visual inspections and document findings Help maintain showroom appearance and inventory standards Work closely with technicians and teammates to keep operations running smoothly What We're Looking For Customer service or sales experience preferred...Hourly payExtra incomePart timeFlexible hoursWeekend work
$60k - $130k
Automotive Mechanic TechnicianPerform diagnostics, repairs, and maintenance on vehicles, including brakes, tires, suspension, heating/cooling systems, and more. Use state-of-the-art computer systems for diagnostics. Conduct visual safety and courtesy inspections. Handle...Full time- ...growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services.Job Description The Automotive Technician, reporting to the...
$28 - $38 per hour
...accurate and effective parts inventory control system that includes perpetual and annual... ...record of efficiently dispatching parts to technicians in the shop to support seamless... ...welcome diversity - we celebrate it! Lucid Motors is proud to be an equal opportunity workplace...Hourly payFull timeWork experience placementWork at officeLocal area- Retail Sales Consultant Do you speak Spanish and English? If you do, we're looking for you! Our Retail Careers come with awesome perks and may include additional starting pay if you are bilingual. Great things are in store! Our part-time careers allow you to optimize...Hourly payTemporary workPart timeLocal areaFlexible hoursAfternoon shift
$110 - $125 per hour
The opportunity: Location requirement: This opportunity is only open to providers with office space for in-person sessions. Demand for in-person sessions is growing. Providers offering in-person care receive 33% more referrals on average. Individual pay rates...Part timeLive inWork at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Motor Control Technician. Be the first to apply!




