Maintenance Mechanic

The primary purpose of this position is to provide full performance level welding, locksmithing, and carpentry work. Major Duties - Plans and lays out welding assignments from blueprints, sketches, drawings, specifications, and work orders. - Performs duties in a safe manner, utilizing safety practices and procedures, and complying with established safety rules and regulations. - Performs routine maintenance, repair, and inspection of various types of mechanical or electronic locks such as mortise, cylinder, deadbolt, GSA safes and vaults, office equipment, padlocks, and emergency exit devices. - Independently applies skilled methods, techniques, and advanced shop mathematics to construct, install, repair, and modify a wide variety of structures. - Uses and maintains tools. Conditions of Employment U.S. Citizenship Required Males must be registered for Selective Service, see This posn is subject to provisions of the DoD Priority Placement Program Disclosure of Political Appointments Direct Deposit: All federal employees are required to have direct deposit Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest Must be able to obtain within 1 year or have previous or current General Services Administration safe inspection certification The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays. Emergency overtime may be required. Shift work may be required The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position May be required to train and/or guide lower grade or lesser experienced employees as required May be required to be certified for working with/and or removing hazardous materials Must be able to obtain and maintain a Secret Clearance This is a drug testing designated position. The incumbent is subject to pre-employment drug testing as a condition of employment, and participation in random drug testing Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance & Operations Work Group . Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of a wide range of welding principles, processes, and techniques and how various metals and metal alloys react to welding processes and skill in formulating plans, patterns, and templates involving straight and curved edges or irregular curves, angles and planes; in layout and pattern development in fabricating complex items from a variety of materials such as galvanized or stainless steel, black iron, aluminum, and alloys; in using and maintaining a variety of metal and welding tools, equipment, and measuring instruments. 2. Knowledge of carpentry methods and techniques and precision carpentry equipment and skill in using, setting-up, operating, and maintaining a variety of woodworking power and hand tools/equipment; constructing, installing, repairing, and modifying wood structures; and in interpreting complex instructions, sketches, blueprints, and building codes. 3. Knowledge of the internal structure and operating characteristics to repair and maintain a variety of standard mechanical and combination-type locking devices; and skill in keying and rekeying locks; and installing locking devices. 4. Knowledge of safety and environmental standards, regulations and requirements. 5. Knowledge of advanced shop mathematics to plan, compute, and lay out more complex and exact projects; and of regulations, procedures, and policies related to records maintenance and documentation. 6. Skill in reading and interpreting blueprints, diagrams, sketches, and technical specifications and ability to produce finished products with precise fits, accurate dimensions, and acceptable performance. Physical Effort Work encompasses strenuous physical exertion which includes; climbing up and down ladders and scaffolds; working in cramped and awkward positions while installing items; and reaching, lifting and bending while using hand and powered tools in uncomfortable positions for extended periods. Weight lifted seldom exceeds 50 pounds. Uses hand and power tools and equipment that my require standing and holding tools in uncomfortable positions for extended periods. The work requires considerable bending, kneeling and stooping. On-site work typically requires crawling, climbing on ladders, scaffolds, and roof tops. Strenuous physical exertion is sometimes required when handling heavy and bulky materials such as sheets of plywood and other construction materials. May lift and move materials up to 40 pounds, unassisted, and occasionally life or move heavier items with the assistance of lifting devices or other workers. Working Conditions Works both inside and outside and is subject to a moderate amount of noise and vibrations from the shop machines. When working outside is subject to a variety of weather conditions. Subject to cuts, bruises, falls and burns. Is exposed to fumes, heat, flying sparks, the glare of torches, ultraviolet radiation, and heated materials. Shop areas normally have adequate lighting and ventilation. Required to wear safety glasses when performing eye hazardous operations. Works in shops and at job sites. In shops, is exposed to moderate high noise levels from operating machinery, sawdust in the air, glue fumes, and hazards associated with woodworking and related power equipment. At job sites, may be exposed to weather conditions and hazards of working on and around scaffolds and ladders and subject to cuts, bruises, and contusions. May work in confined areas such as crawl spaces and attics which may be dusty and dirty. Uses protective devices such as ear plugs, safety glasses, respirators, and gloves. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience. Education This job does not have an education qualification requirement. Additional Information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information. If you have questions regarding this announcement and have hearing or speech difficulties. Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. #J-18808-Ljbffr