Repair and Tool Technician
$24 per hourThe Home Depot
Job Description
Position Purpose:
Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. - $24.00
- ..., outside diameter, inside diameter, runout, etc. Experience with air gauging to verify tight tolerance bores is a plus Assembles, repairs, and fabricates metal parts by operating mechanical equipment. Assembles parts into sub-units or complete units. Uses blueprints and...SuggestedLocal areaImmediate startShift workNight shift
- ...technical documents to complete machining operations Manage cutting tools in CNC machines, ensuring optimal tool load and measurement for... ...operational issues, including alarm resolutions and tooling repairs, to maintain maximum machine uptime Operate CNC machines in a...SuggestedPermanent employmentFull timeContract workImmediate startWeekend workAfternoon shift
- ...Job Description Job Description Vitesse Systems is looking for a Tool Crib Technician to join the team in Harbor City, California! This is a temporary position, with the potential to hire on full-time. This Vitesse location is positioned to provide productions and...SuggestedPermanent employmentFull timeTemporary workCasual workWork at office
- ...united around reindustrializing American manufacturing for the 21st century and beyond. The Role We are seeking a Tooling Technician to serve as a cornerstone of our fabrication and automation operations. This is a hands-on, technical role ideal for someone...SuggestedPermanent employmentFull timeLocal areaRelocation packageFlexible hours
$53.1k - $64.54k
...skilled locksmith work involved in the installation adjustment, repair and maintenance of various types of locks and lock hardware; provide... ...furniture, as needed to install locks. Assure proper care of tools and equipment. Open locked doors and cabinets when keys are...SuggestedFull timeWork at office- Thread/Form Roll Operator Looking for a dedicated individual to join our team as a Thread/Form Roll Operator. This role involves operating and maintaining roll machines to ensure smooth production processes. If you have experience in this field and are ready to contribute...
- ...Operator / CNC Machinist The CNC Machine Operator / CNC Machinist is responsible for setting up, operating, and monitoring CNC machine tools to manufacture precision metal components that meet strict quality and dimensional requirements. This role works with production,...
$25.58 - $38.36 per hour
...sketches, oral and written instructions to determine the sequence of operations to be performed, dimensions and tolerances to be held, tools to use, method of locating, aligning and holding work and feeds and speeds. What You Will Do: Make machine adjustments for...Part timeApprenticeshipCurrently hiringRelocation packageFlexible hours- ...and following shop safety and quality processes. You will work with the production team to ensure first-piece verification and timely output. The ideal candidate will have basic shop math, good communication skills, and the ability to learn new tooling. #J-18808-Ljbffr...Afternoon shift
$30 - $35 per hour
...machining processes. Perform daily setups on both lathe and mill machines. Ensure precision and quality by using various measurement tools such as calipers. Engage in machining legacy parts and manage the workflow through multiple phases including machining, deburring,...Contract workTemporary work$26 - $31 per hour
...California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines,...Full timeRemote workFlexible hoursAfternoon shift- ...SIEMENS systems Strong knowledge of G-code programming and CAM software Excellent understanding of metalworking processes, cutting tools, and materials Proficient in reading and interpreting technical drawings, blueprints, and engineering specifications Experience with...Full timeApprenticeship
$30 - $35 per hour
...timing and true axial runout requirements. Learn to create setup kits and sheets to minimize setup time. Learn to sharpened cutting tools and rework holders. Learn to sharpen tools on cutters and grinders; redressing tools that wear out. Use advanced inspection equipment...Hourly payPermanent employmentTemporary workFlexible hours$23 - $27 per hour
...for tensile and fracture toughness, as well as fixture machining/repair Perform product inspection and rework as required Read and... ...specimen machining Proficiency with typical precision measurement tools such as dial indicators, bore gauges, micrometers, calipers, and...Permanent employmentTemporary workWeekend work- ...Interpret blueprints, drawings, and technical instructions Perform first article and in-process inspections Use precision measuring tools such as micrometers, calipers, and CMM equipment Make tool adjustments and assist with tool maintenance as needed Maintain organized...Full timeShift work
- ...Centers for new and existing product lines, determining estimated setup and cycle times to maintain an accurate ERP system. Select tooling, fixturing, and machine allocation based on material and part geometry for the fabrication of machined parts using 2 to 4-axis...Work at office
$35 per hour
..., and work instructions to determine machining requirements. Assist with CNC machine setup, including basic setup tasks such as tooling selection, fixture installation, and part alignment. Operate CNC mills and, when needed, support operations involving lathes, provided...Weekly payLong term contractContract workTemporary workWork at office- ...speed and accuracy. The ideal candidate with have a minimum 5 years of close tolerance aerospace machining experience, have their own tools, be a flexible self-starter, set-up, run and inspect their own work with little supervision. We offer a competitive benefits package...Flexible hoursShift work
- ...Description Multiple Jobs for CNC Lathe Setup - All shifts INDEX Machines mostly - Also HAAS & Takisawa Set and adjust work offsets, tool offsets, and machine parameters Verify first piece parts using precision measuring equipment such as calipers, micrometers, bore...Local areaAll shifts
- Job Opportunity Ready for your next exciting, high-growth job opportunity? Manual machinists with computer numerical control (CNC) experience are on the front lines of a tech-driven revolution in the manufacturing space and when you partner with Randstad, we can put...Immediate start
$25 - $35 per hour
...up machines accurately and assess geometric tolerances. Set up jobs by loading programs, selecting fixtures, part holders, and tooling to machine parts to specifications. Prepare and operate CNC machines, including; lathes, mills, grinders, waterjets and laser cutters...Hourly payFull timeApprenticeshipShift workAfternoon shift$29 - $34 per hour
...execute the tasks and make any necessary adjustments to produce a better result. Inspect finished product using precision measuring tools such as micrometer, calipers, and gages. Communicate with Quality and Engineering department regarding non-conforming parts....Hourly pay$25 - $38 per hour
...experienced with CNC machine operation, able to read blueprints, select tooling, perform machine setup and offsets, and verify parts meet tight... ...feeds/speeds, tooling, and coolant systems, and coordinate repairs or maintenance as needed. Deburr and finish parts to...Hourly payOngoing contractLocal area$22 - $30 per hour
...roll machines such as feeding systems on Warren, Waterbury, EWM, Roy, Hartford, platforms. Basic familiarity with thread/form roll tooling. This role requires intermediate competencies in print reading and inspection processes, as well as basic trouble shooting. 1-2 years...Hourly payFull timeZero hours contractWorldwide$30 - $35 per hour
.... Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform routine maintenance and troubleshooting on machines...Permanent employmentWork at office$20 - $26 per hour
...and inspections of products, services, and software systems, and repair faulty programs and machinery. You should have a mathematic... ...production and processing. You'll be handling complex machines and tools. Key Performance Deliverables: Cultivate a strong rapport...For contractorsWorldwide- Cnc Machine Operator (2nd Shift) Monday Friday 1:30pm to 10:00pm Setup, operation, and maintenance of machinery to ensure efficient production. Key responsibilities include: MUST be able to have recent experience with micrometer and calipers (will get tested during interview...Monday to FridayAfternoon shift
$30.15 - $45.23 per hour
...operate OD/ID grinding machines and to operate associated wheel dress and balancing equipment (60% of job) Use a variety of hand tools, gauges and dial indicators to install involute cams, yokes, arbors, work piece, etc. Use optical equipment to present wheel dresser...Part timeCurrently hiringWork at officeRelocation packageFlexible hoursShift work- ...similar) preferred ~ Ability to read and interpret engineering blueprints and GD&T symbols ~ Strong knowledge of speeds, feeds, tooling, and fixturing for various materials ~ Detail-oriented with a commitment to tight tolerances and high-quality output ~ Ability...
$35 - $45 per hour
...Perform in-process and final inspections using precision measuring tools (micrometers, calipers, indicators, bore gauges) Work with... ...~ Comfortable working on new part manufacturing as well as repair and restoration projects ~ Experience operating overhead cranes...Hourly payFull timeLocal areaAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- hotel maintenance technician Gardena, CA
- hospital maintenance mechanic Gardena, CA
- data center maintenance technician Gardena, CA
- pool repair technician Gardena, CA
- hospital maintenance technician Gardena, CA
- skilled maintenance technician Gardena, CA
- maintenance mechanic Gardena, CA
- repair technician Gardena, CA
- maintainer Gardena, CA
- maintenance technician Gardena, CA


