Sheet Metal Mechanic
$36 per hourKodiak Labor Solutions
Job Description Sheet Metal Mechanic | Per Diem Location: Huntsville Area, AL Employment Type: Project-based Compensation: $36.00/hour Per Diem: $120/day for qualified travelers About the Opportunity Kodiak is hiring Sheet Metal Mechanics for commercial and industrial construction work in the Huntsville area. You'll install, modify, and repair sheet metal ductwork and HVAC components, working from project drawings and specifications to deliver secure, properly sealed installations. This role is a great fit for tradespeople who take pride in quality work, put safety first, and work well alongside other skilled trades. Key Responsibilities
- Read and interpret blueprints, sketches, and specifications to determine installation requirements
- Measure, cut, bend, and fit sheet metal for ductwork, transitions, offsets, and connections
- Install ducts, vents, hangers, and supports to project requirements and SMACNA standards
- Hang ductwork securely, keeping it properly aligned and level
- Join and seal duct sections using collars, flanges, bolts, and other specified fastening methods
- Sketch transitions and connections for fabrication under supervision
- Inspect completed work for accuracy, fit, sealing, and compliance with specifications, and repair or replace components as needed
- Maintain tools and equipment, follow site safety procedures, and coordinate work with other trades
- Installations completed accurately and to drawings and specifications
- Schedules met without cutting corners on workmanship
- Your own work inspected and any issues addressed right away
- Safety hazards and installation problems recognized and reported to supervision
- High school diploma, GED, or trade school education
- Basic understanding of HVAC systems and components
- Ability to read and interpret project drawings
- Ability to read and write English, follow verbal and written instructions, and perform basic math
- Ability to safely use the tools and equipment used in sheet metal installation
- Must pass an extensive, project-specific criminal background check
- Previous HVAC or sheet metal installation experience
- Commercial or industrial construction experience
- OSHA 10 certification
- Lift and carry 30 to 50 lbs and handle tools and materials, with or without reasonable accommodation
- Climb ladders and scaffolding, work at heights, and maintain balance
- Stand, walk, bend, kneel, crouch, crawl, push, pull, and reach as required
- Work on active construction sites with uneven surfaces, obstructed pathways, varying noise levels, and possible exposure to dust and chemicals
- Follow all required safety procedures and wear appropriate PPE
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Sheet Metal Mechanic in Huntsville, AL vacancy
$24 - $27 per hour
...Sheet Metal Mechanic Pay: $24-$27 HR/DOE | Location: Redstone Arsenal, AL | Weekly Pay | Full Benefits | $300 sign-on bonus We are hiring experienced Journeyman Sheet Metal Mechanics for commercial construction projects in and around Redstone Arsenal, AL. Candidates...SuggestedWeekly payTemporary workRelocation packageShift work- ...Aircraft Sheet Metal Mechanic Status: Full-Time Work Schedule: Monday - Friday, 7:30 AM - 4:00 PM (may require schedule adjustments during surge periods) Job Summary Axxeum, Inc. is seeking a skilled Aircraft Sheet Metal Mechanic to support our aviation maintenance...SuggestedFull timeContract workLong distanceMonday to Friday
$36 per hour
...Job Description Job Description Sheet Metal Mechanic – HVAC Ductwork Installation Location: Huntsville, AL Pay Rate: $36.00 per hour Per Diem: $120 per day worked for qualified travelers Schedule: Monday–Thursday, 10-hour shifts; Friday, 8-hour shift...SuggestedHourly payDaily paidShift work- ...UH-60 Sheet Metal Mechanic Alabama Helicopter Structural Mechanic- UH-60 & Similar Helicopters Company: SkyBridge Aviation LLC Location: Huntsville, Alabama, USA Type: Permanent Description: We are seeking experienced Helicopter Structural Mechanics with 4-8+...SuggestedPermanent employment
- ...Job Description Job Description Summary of Job: We're always seeking skilled Sheet Metal Mechanics with experience fabricating, installing, repairing, and modifying sheet metal systems and components. If you have strong technical knowledge and enjoy solving complex...Suggested
- ...HVAC Sheet Metal Mechanic CSUSA Mid South, is a leader in the mechanical systems and services industry, providing our commercial, industrial and institutional customers with engineering, fabrication, piping, plumbing, electrical, refrigeration, controls, design,...Full timeTemporary workFor contractorsWork at officeLocal areaFlexible hoursNight shift
- ...HVAC Sheet Metal Mechanic We are seeking a reliable and responsible individual to join our team as a full-time sheet metal mechanic who can fabricate, assemble, install and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace...Full timeTemporary workLocal areaFlexible hoursNight shift
- Construction Sheet Metal Mechanic### Construction Sheet Metal MechanicApply: Madison, AL: Full time: Posted Today: R-26-2610-1019**Summary of Job:**Perform journeyman level construction, installation, alteration and repair of sheet metal products and equipment in accordance...Full time
- ...Aerotek - JobID: JP-005853246 [Production Operator / Assembly Line Worker] As a Sheet Metal Technician at Aerotek, you'll: Perform assembly of components, part marking, sizing, and aligning; Prepare parts for welding, and prep parts for painting; Use tool hardware such...Immediate start
- Sheet Metal / Structural Fabricator Location US-AL-Huntsville ID 2026-1382 Category Manufacturing Operations Position... ...with the fabrication and assembly of electronic and mechanical hardware assemblies ~3 years' experience preferred; five years...Full timeRemote work
- ...Description Job Description Summary of Job: Perform journeyman level construction, installation, alteration and repair of sheet metal products and equipment in accordance with blueprints, drawings and work orders; provide technical guidance and direction to lower...
- ...Machinist for their Huntsville, AL facility. The right candidate will produce new and replacement parts in making repairs of metal components of mechanical equipment. This is a contract-to-hire opportunity. JOB DUTIES Produce new and replacement parts in making repairs of...Contract work
- ...machining techniques. The selected candidate will be trained in exposure to normal metal working materials and hazards as well as being trained in and expected to perform other mechanical technician tasks required to support Advanced Manufacturing Welding Capabilities...Hourly payContract workWork at officeMonday to FridayNight shiftAfternoon shift
- Workers' Compensation Attorney Brock & Stout Attorneys at Law is seeking a Workers' Compensation Attorney to join our growing team. This position may be based at any of our 13 office locations. Prior experience representing injured workers is preferred, but attorneys...Work at office
$40 - $50 per hour
Overview We're hiring experienced CNC Machinists for an aerospace and defense manufacturer in Arab, Alabama. This is a high-mix, low-volume precision machining environment producing complex components for aerospace and defense applications. The shop runs a broad...Permanent employmentFull timeMonday to FridayShift workDay shiftAfternoon shift- Job Description Job Description Gillmann Services is currently recruiting for CNC Machinist in the Huntsville Alabama area for immediate start Set up and operate Mazak CNC machines. Read, interpret, and work from blueprints, engineering drawings, and technical...Immediate start
- ...plus Additional education, training, or certifications in closely related disciplines is a plus Experience in fabrication, mechanical assembly, and manufacturing is a plus Experience working in an ISO9001/AS9100 environment is required Must have a general working...Work experience placementWork at officeLocal areaFlexible hours
- ...of tooling, setups, speeds, feeds, and machining processes Skilled with precision measuring and inspection equipment Strong mechanical aptitude, troubleshooting, and attention to detail Able to work independently and take ownership of your work Precision,...
$25 - $42 per hour
Job Description Job Description Job Title: Multi-Axis CNC Machinist $25-$42/hr Based on experience Job Description In this hands-on role, you will independently set up, operate, and troubleshoot CNC equipment to produce high-quality precision parts. You will...Weekly payPermanent employmentTemporary work$87k - $95.56k
...CNC Machine Operators who can diagnose and repair electrical and mechanical issues on CNC machine can increase their pay by as much as 37%... ...Jr. and David Weber. It began as a regional distributor of metal fabricating equipment, building its early reputation in Texas by...Hourly payNight shift- ...am) Relocation provided Qualifications: ~2+ years related CNC experience. ~1+ years working with super alloys and hardened metals. ~ Experience with one or more of the following CNC machines: Mazak, Hass, DMG Mori, Mori Seiki, and/or Okuma ~ Working...Permanent employmentTemporary workLocal areaRelocationShift workAfternoon shift
- Job Title: Machinist Summary: We are seeking a skilled Machinist to set up, operate, and maintain a variety of machine tools to produce precision parts and instruments. The ideal candidate will have strong knowledge of machining practices, attention to detail, ...Apprenticeship
- ...working with multi-axis lathes and 5-axis mills producing complex parts to tight tolerances ~2+ years of experience machining hardened metals including nickel-based alloys, stainless steels, and high-temperature superalloys ~ Experience with CNC controls such as Mazak,...Permanent employmentTemporary workLocal area
- ...machinery that automatically mills, punches, drills, broaches or reams metal and/or plastic parts. Make adjustments to adhere to established... ...and development machined parts. Interpret drawings, route sheets and other specifications to ascertain nature of assigned work...Local areaShift work
- ...9100, ISO 9001), and regulatory requirements relevant to the defense and aerospace industry.Document programming procedures, setup sheets, and best practices.Mentor and provide technical guidance to junior programmers and machinists.Requirements & Desired SkillsAssociate...Full time
$48.1k - $86.95k
...work is ahead! Leidos is seeking talented CNC Machinists for all shifts - 1st shift, 2nd shift and Weekend shifts to join our Mechanical Manufacturing team in Huntsville, AL. The ideal candidate will need to have experience in programming, setup, and operation of a...Full timeLocal areaImmediate startWorldwideAll shiftsShift workWeekend workDay shiftAfternoon shift$22 per hour
...shop mathematics and work as a member of a team while adhering to all company policies and procedures.What's Needed?Trade school, a mechanical background, or experience operating CNC machines is preferred.Ability to read and interpret technical drawings and specifications...Monday to FridayDay shift- ...and interpret engineering drawings and CAD modelsIdentify necessary tooling/fixturing required to manufacture partsCreate/Edit setup sheets/work instructions for CNC machinists or operators to run parts, while ensuring processes are complete and quality of parts are...Full timeWork experience placement
- ...METTS). The CNC Programmer is responsible for producing complex, non-routine parts and items of equipment from raw stock of different metals, metal alloys, and other materials. This position works with minimal supervision to produce one-of-a-kind work products.Job duties,...Contract workFor contractorsShift workAfternoon shift
- ...skilled and experienced CNC Programmer for our 1st shift to join our Mechanical Manufacturing team in Huntsville, AL, to support operations in... ...package consisting of CNC program, machining operation setup sheets, tool lists and other related documentation for use by...WorldwideDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Sheet Metal Mechanic. Be the first to apply!




