Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Double Backer Operator

Pratt Industries

POSITION TITLE: DOUBLEBACKER OPERATOR

REPORTS TO: Corrugator Supervisor/Lead

SUMMARY

Responsible for all activities associated with running the double-backer including setup, operation, cleanup, and recommending improvements to operations.

DUTIES AND RESPONSIBILITIES

Set up bridge guides and glue station in accordance with proper setup techniques.

Check wet end lineups to verify correct roll stock is received and used.

Put rolls of paper in mill roll stands ensuring proper size and grade of paper to be run and make splices and paper changes as necessary.

Make adjustments during runs for tension, alignment, adhesion, and warp control.

Trim only the necessary amount of paper from the rolls when preparing for splices.

Remove roll stock from the machine when necessary and mark the proper size, grade, diameter, and lineal footage on the roll and place core plugs in each end of the buttrolls.

Maximize the utilization of equipment by operating the double-backer at available capacity and speed in line with those of the corrugator.

Clean starch pans, metering rolls, and glue rolls when necessary.

Keep the doublebacker area clean.

Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, Quality Data.

Turn in maintenance work orders to supervisor for needed repairs. Be proactive in the maintenance of equipment.

Take all paper off of cores of stub rolls.

Assist the Corrugator Operator as necessary.

Assist in the training of dry end personnel.

Adheres to production schedule. Makes recommendations for optimizing the schedule to meet cost, quality and service goals. Reports any unusual scheduling issues to Supervisor.

Comply with all company policies and procedures, including safety and maintaining good housekeeping.

Additional duties may be assigned by management.

EDUCATION and/or EXPERIENCE

High school diploma or GED.

Candidates are PREFERRED who offer the following:

Prior work experience in the corrugated industry.

6 months' experience on the dry end of the corrugator

LANGUAGE SKILLS

Able to read and follow instructions on factory masters.

MATHEMATICAL SKILLS

Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more concrete variables in standardized situations.

TECHNICAL SKILLS

The individual must have a working knowledge of the following:

Equipment design and capabilities that can be translated into efficient operation.


Product layouts and production specifications

Product quality specifications

Quality standards

CERTIFICATES, LICENSES, REGISTRATIONS

May be required to maintain a current Lift Truck Operator License.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job.

While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job.

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud.

PERFORMANCE MEASUREMENTS

The performance of the employee will be measured as follows:

Operating standards - the employee will need to meet or exceed the Operating Standards in the areas of quality, cost, safety, customer satisfaction and productivity. Such standards will be set annually and communicated to the employee.

Personal growth - while the company will provide the tools to assist the employee to grow professionally the responsibility for moving forward lies with the individual. Each year there will be goals developed and agreed to by the employee and his/her superior.

Employee relations - through observations the employee will be evaluated regarding his/her behaviors associated with appropriate human interaction, respect and communication.

Creativity - this will be evaluated by how active the employee is in participating in advancing the business through new and innovative ideas.

Pratt Industries provides equal employment [and affirmative action] opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability.

Pratt Industries is America's 5th largest paper and packaging company with more than 9,000 highly skilled green collar employees dedicated to the environment and sustainability. Pratt Industries is one of the largest corrugated packaging companies in America, with sophisticated manufacturing facilities in more than twenty states. The company operates several of the most modern, cost effective paper mills in the country, as well as a series of sheet and box plants strategically placed throughout the United States offering a wide range of creative packaging solutions. Pratt Industries is committed to recycling and the environment by harvesting the urban forest.

Pratt Industries offers competitive compensation plans with incentive opportunities, full benefits package including medical, dental, vision, life, disability, All State, Pre-Paid Legal, and 401(k) with company match, paid vacation, paid holidays, and childbearing and parental leave.

Pratt Industries is an Equal Opportunity/Affirmative Action Employer.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Double Backer Operator in Statesville, NC vacancy
  • $21.95 - $32.92 per hour

     ...Quanex is looking for a Machinist to join our team located in Statesville, NC. As a Machinist, you will support operations within the plant by producing or modifying extrusion tooling and various manufacturing equipment components. We Offer You! ~ Competitive... 
    Suggested
    Hourly pay

    Quanex

    Statesville, NC
    3 days ago
  •  ...Converting Machine Operator Responsible for all activities associated with running production machines including setup, operation, cleanup, and recommending improvements to operations. Monitor quality. Maximize the utilization of equipment by operating the machinery at... 
    Suggested
    Work experience placement
    Second job

    Pratt Industries

    Statesville, NC
    18 hours ago
  • $13.5 - $16.5 per hour

     ...Production Equipment Operator United Talent Staffing is hiring Production Equipment Operators for a leading manufacturing facility in the Statesville, NC area! We are seeking dependable, safety-focused individuals to join a growing production team. Openings are available... 
    Suggested
    Weekly pay
    Full time
    Shift work
    Day shift
    Afternoon shift

    United Talent Staffing

    Statesville, NC
    1 day ago
  • $15 per hour

     ...handling tasks Use basic hand tools to assemble, adjust, and prepare materials Measure materials accurately using a tape measure Operate production equipment such as manual strapping machines and miter saws Support packaging and shipping preparation processes... 
    Suggested
    Weekly pay
    Full time
    Contract work
    Temporary work
    Monday to Friday
    Shift work
    Day shift

    Onin Staffing

    Statesville, NC
    2 days ago
  •  ...Carolina-Statesville Overview To perform activities regarding compounding, weighing, mixing, processing of materials and safe operation of equipment throughout the facility. To ensure the even flow of the properly mixed compound throughout the manufacturing process.... 
    Suggested
    Immediate start
    Night shift
    Afternoon shift

    Hexpol

    Statesville, NC
    9 days ago
  •  ...Job Title Salvagnini Operator Job Description This position is responsible for setting up, operating, and maintaining the Salvagnini S4 (punching and shearing) and P4 (panel bending) machines to produce high-quality sheet metal components. This role plays a critical... 

    Janus International

    Statesville, NC
    3 days ago
  • $19 - $22.5 per hour

     ...Machine Operator Job Category: Production & Manufacturing Requisition Number: MACHI007475 Posted: July 15, 2026 Full-Time On-site Statesville, NC 28625, USA Job Details Quanex is looking for a Machine Operator to join our 2nd Shift team located in Statesville... 
    Hourly pay
    Full time
    Immediate start
    Monday to Friday
    Shift work
    Afternoon shift

    Quanex Building Products

    Statesville, NC
    2 days ago
  • $18 - $19 per hour

     ...Machine Operator Statesville, NC 28687 Employment Type: Contract to Perm Job Number: 57679610 Pay Rate: $18-19 / hour Machine Operator Location: Statesville, NC Shift: 1st and 2nd (Mon-Thur) Pay: $18-$19 As a Machine Operator through Graham Personnel Services... 
    Permanent employment
    Contract work
    Shift work

    Graham Personnel Services

    Statesville, NC
    4 days ago
  • $17 per hour

     ...Machine Operators Statesville, NC With over a century of industry excellence, this is your chance to put your Machine Operator experience to work with a premier manufacturer. Enjoy competitive weekly pay, top-tier benefits, and the opportunity to grow in a long-term... 
    Weekly pay
    Full time
    Contract work
    Temporary work
    Shift work
    Night shift
    Weekend work
    Day shift

    Onin Staffing

    Statesville, NC
    3 days ago
  •  ...Machine Operator Job Category: Manufacturing Operations Full-Time On-site 1401 Industrial Dr Statesville, NC 28625, USA Description Primary Responsibilities & Duties: Ensures safety of personnel and compliance with all applicable health and safety... 
    Full time
    Local area

    Nelson Global

    Statesville, NC
    1 day ago
  •  ...Converting Machine Operator Responsible for all activities associated with running production machines including setup, operation, cleanup, and recommending improvements to operations. Monitor quality. Maximize the utilization of equipment by operating the machinery... 
    Work experience placement
    Second job

    Pratt Industries

    Statesville, NC
    18 hours ago
  •  ...industry. The typical workflow will include machining new parts, creating tooling for the production floor, optimizing workflow for the operators. If you thrive in a creative, fast-paced, self-motivated work environment, send us your resume to join the team! Requirements... 
    Temporary work

    Kooks Custom Headers

    Statesville, NC
    3 days ago
  • $17 - $18 per hour

     ...Job Title Schedule: 5:00 AM to 3:30 PM Monday - Friday Pay Range: $17-$18 Overview Operate tube machinery to bend, cut, and form metal materials to specification. Key Responsibilities Set up, adjust, and operate tube machinery and equipment Perform tooling... 
    Local area
    Monday to Friday

    Nesco Resource

    Statesville, NC
    5 days ago
  • $19.4 per hour

     ...Machine Operator Machine Operator is responsible for working in conjunction with the Maintenance Department to set-up, start-up, and operate rotational molding equipment to safely produce plastic parts of acceptable quality at a standard out-put rate throughout production... 
    Temporary work
    Flexible hours
    Day shift

    Wastequip

    Statesville, NC
    4 days ago
  •  ...CNC Rotary Tube Bending Machine Operator Key Responsibilities: Ability to setup and run CNC rotary tube bending machines such as Soco, Eagle or Addison with limited supervision. Set-up and operate CNC rotary draw bending machine while conforming to manufacturing... 

    Kooks

    Statesville, NC
    18 hours ago
  •  ...products includes perimeter security solutions for industrial, commercial, and residential applications. Merchants Metals is an operating company of Fencing Supply Group and is seeking a welder to become an integral part of our team! We are looking for an enthusiastic... 
    Temporary work
    For contractors
    Work experience placement
    Day shift

    Merchants Metals

    Statesville, NC
    18 hours ago
  •  ...CNC Machinist We are looking for an experienced CNC Machinist to join our team. In this role you will set up, operate, and clean CNC and Milling machines to ensure efficient operations, prevent contamination and achieve optimal utilization. At Addman you'll be part of... 
    Temporary work
    Work experience placement
    Flexible hours

    ADDMAN

    Statesville, NC
    18 hours ago
  • Job Description Job Description Mobile Equipment Operator Location: 1404 Industrial Drive, Statesville, NC, 28625, United States Employee Type: FT Non-Exempt Manage Others: No Description Requirements PI3ec115ad55be-25405-39657662

    Lane Enterprises Inc

    Statesville, NC
    8 days ago
  • $18 per hour

    Production Worker Kelly Professional & Industrial is hiring a Production Worker for a Manufacturing Company in Statesville, NC. Shift: ~1st shift: 7:30 am 4:00pm ~ Monday Friday Payrate: ~$18 / hr ~ Weekly Pay every Friday Duties: Use hand tools...
    Weekly pay
    Temporary work
    Monday to Friday
    Shift work
    Day shift

    Kelly

    Statesville, NC
    3 days ago
  •  ...cartons/colors/labeling/etc.). Understands metrics and schedules. Measure product dimensions to determine accuracy of machine operation. Performs minor machine maintenance such as oiling machines and dies. May have the ability to assist/train new machine... 
    Full time
    Monday to Friday
    Night shift

    Gibraltar Industries

    Statesville, NC
    18 hours ago
  • $19 per hour

     ...Machine Operator 2nd Shift Statesville, NC 28625 Employment Type: Contract to Perm Pay Rate: $19.00 / hour We are currently seeking experienced Machine Operators for a plastic injection molding company in Statesville. This company manufactures plastic components... 
    Permanent employment
    Contract work
    Afternoon shift

    Graham Personnel Services

    Statesville, NC
    1 day ago
  •  ...Carmelizer Operator While working safely at all times, the carmelizer operator is responsible for the overall performance of the carmelizer. He/she will see that all quality, process, cost standards are met, procedures are followed, records and information maintained... 
    Temporary work
    Day shift

    JPS Composite Materials

    Statesville, NC
    9 hours ago
  •  ...Motor Equipment Operator I - Water Maintenance Public Utilities Salary Range: $20.76 - $34.26 Hourly / $43,180.80 - $71,260.80 Annually FLSA Position Class: Full-time, Non-Exempt Work Schedule: Monday Friday, 7AM -3:30PM Summary This position is responsible... 
    Hourly pay
    Permanent employment
    Full time
    Monday to Friday
    Night shift
    Weekend work

    City of Statesville, NC

    Statesville, NC
    18 hours ago
  •  ...Salvagnini Machine Operator Hours: Monday - Thursday 5:30 am - 4:30 pm. Pay: $18 Job Summary We are seeking a skilled Salvagnini Machine Operator to operate and program automated Salvagnini sheet metal equipment, including panel benders, punching/shearing centers... 

    Nesco Resource

    Statesville, NC
    1 day ago
  • $20 - $34 per hour

     ...Whether your journey with us lasts two days or two years, we value your contribution. What You'll Do as a Machinist: Set up and operate CNC mills, lathes, and related machining equipment to produce precision components Program, edit, and optimize machine controls... 
    Hourly pay
    Weekly pay
    Full time
    Contract work
    Temporary work
    Monday to Friday
    Day shift

    Onin Staffing

    Statesville, NC
    4 days ago
  • $18 per hour

     ...known engineered industrial components and exhaust systems manufacturing company in Statesville, NC. We are now hiring Machine Operators who are team players, versatile, and dependable! Pay: $18.00+ per hour based on experience Job description: MACHINE OPERATOR... 
    Hourly pay
    Work experience placement
    Immediate start
    Monday to Friday
    Shift work
    Day shift

    Proman Staffing

    Statesville, NC
    9 days ago
  • $16.75 per hour

    Manufacturing Worker Jobs | Statesville NC Focus Workforce Management has recently partnered with a large manufacturing facility in Statesville, NC. If you have been looking for Production work or other job types to start building and improving your skillset Focus is...
    Hourly pay
    All shifts
    Shift work

    Focus Workforces

    Statesville, NC
    4 days ago
  •  ...Set-Up Supervisor Aid supervision in daily activities to ensure productivity of the operations. Responsible for monitoring of the set-up personnel including oversight of work performed. Working with supervisors, quality and manufacturing engineering personnel on troubleshooting... 
    All shifts
    Shift work

    Mack Molding

    Statesville, NC
    1 day ago
  • Kooks-Custom-Headers in Statesville is seeking a CNC programmer capable of managing 3 axis VMC’s and live tooling lathes. The ideal candidate will need to proficiently create, set up, and refine CNC programs in a high-volume manufacturing environment. Responsibilities include...

    Kooks-Custom-Headers

    Statesville, NC
    4 days ago
  • Kooks Custom Headers, Inc. is seeking a CNC Programmer for its high-volume manufacturing facility in Statesville, North Carolina. Ideal candidates will be experienced in CNC programming, specifically with 3 axis VMC’s and live tooling lathes. Responsibilities include machine...

    Kooks Custom Headers, Inc.

    Statesville, NC
    4 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Double Backer Operator. Be the first to apply!