Welder
Department of the Navy - Agency Wide
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the Welder in Langhorne, PA vacancy
- ...Job Type Full-time Description RD&S is seeking a Pipe Welder to work with our construction team, installing refrigeration systems at various customer locations. Key Responsibilities: Maintain a positive and professional attitude and appearance...SuggestedFull timeTemporary workApprenticeshipFlexible hours
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility....SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...We are currently seeking qualified Mechanics and Welders for a busy metals recycling facility. Candidates must have prior experience in the skilled trades industry and be comfortable working in a fast?paced environment. Schedule • Monday–Friday • 8?hour shifts...SuggestedFull timeLocal areaMonday to FridayShift work
- ...Vision, & Dental) • Discounts on Klein Tools products • Education and Professional Development Assistance The Combination Welder is responsible for preparing and welding materials using MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) techniques. This position...SuggestedDay shift
- Job Description Job Description Is this you? Do you have proven experience assembling cabinets and casework? Are you comfortable reading a tape measure and blueprint drawings with precision? Have you worked with laminates and the tools of the trade in a mass ...Full timeRelocation
- ...Job Opportunity We are currently seeking qualified Mechanics and Welders for a busy metals recycling facility. Candidates must have prior experience in the skilled trades industry and be comfortable working in a fast-paced environment. This position involves maintaining...
- ...Job Description Job Description DC Fabricators (DCF) is seeking a talented Welder to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. Shifts may vary depending on company needs. At DCF, you’ll be part of a skilled...Work at officeFlexible hoursShift work
$800 per month
Job Description Job Description Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team Mavis TODAY at our...Hourly payWeekly payImmediate start- ...Job Summary: Welder: Play a vital role in our metal fabrication process. Your primary responsibility will be to perform MIG welding on various metal components. Your work will contribute directly to the production of high-quality products that meet our clients' expectations...Local area
- ...TIG Welder Entry Level STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Entry Level, Level 1 or Level 2, responsible for TIG/GTAW welding...
- Job Description Job Description Do you have Fire Sprinkler installation and service experience? Would you like to start a career with a growing company that offers excellent benefits and can offer room for advancement? Northern Mechanical Contractors, Inc would like...For contractorsApprenticeshipWork at office
- Job Description Job Description About the Role: Join Newtown Fireplace Shop as an Experienced Gas Fireplace Maintenance Technician, where you'll play a vital role in ensuring our customers enjoy safe and efficient heating solutions. We are looking for dedicated ...Flexible hours
$21 - $33 per hour
Job Description Job Description Manufacturing Operators – Rimtec Corporation Location: Burlington, New Jersey Facility: PVC Manufacturing Schedule: Full-Time with Required Overtime Union Position Position Overview We are currently seeking Manufacturing...Hourly payFull timeTemporary workWork at officeFlexible hoursShift workAfternoon shift- Job Description Job Description Weighing & Blending Operator (2nd Shift) About KVK Tech KVK Tech is a U.S.-based generic and specialty pharmaceutical manufacturer committed to developing and producing high-quality, FDA-approved medicines that improve patients...Full timeShift workWeekend workAfternoon shift
- ...Job Title: Welder 2nd Shift (3:00pm - 11:00pm Mon-Fri) Department: Fabrication Accountability: This position reports to the Production Supervisor - Fabrication Responsibilities: • Responsible for welding various metals: stainless steel, aluminum, carbon steel...Afternoon shift
$60k - $150k
Job Description Job Description Do you get excited when figuring out how things work? Do you love the challenge of troubleshooting something that’s broken? Would you like to have a part in improving the home life of families in your community? If so, we are looking...Daily paidFull timeApprenticeshipWeekend work- Job Description Job Description CJ's: Your Ideal Workplace! • Family-owned and operated business for over 50 years. • Competitive benefits package: PTO, paid holidays, medical/dental/vision/disability/life insurances, and 401(k) plans. • Employee discounts, ...Traineeship
- Job Description Job Description DC Fabricators (DCF) is seeking a talented Fitter/Fabricator (2nd Shift) to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. The hours for this position are 3:30 PM – 12:00 AM. At...Work at officeFlexible hoursAfternoon shift
- Job Description Job Description Description What You’ll Do There’s no such thing as a dull day when you are installing industrial refrigeration systems. Under the direction of the Field Supervisor, you’ll be consulting blueprints, work orders, and schematics...Weekly payTemporary workFlexible hours
- ...We are currently seeking qualified Mechanics and Welders for a busy metals recycling facility. Candidates must have prior experience in the skilled trades industry and be comfortable working in a fast?paced environment. Schedule • Monday–Friday • 8?hour shifts...Contract workLocal areaMonday to FridayShift work
- Summary You will serve as a SHEET METAL MECHANIC LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- Job Description Job Description ~ Main functions: The Maintenance Technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive...Monday to Friday
- Job Description Job Description Description: Company Overview: Founded in 1936 and proudly 100% employee-owned, Harold Beck & Sons, Inc. (Beck Electric Actuators) engineers best-in-class electric actuators that deliver unrivaled precision and durability in demanding...Local areaWorldwide
- Job Description Job Description Job Title: Service Technician Department : Service Supervisor: Service Manager Summary Description Repair, customize, maintain, or overhaul both customer and dealer owned motorcycles as close to the allotted time schedule...Work experience placementFlexible hoursAfternoon shift
- Summary You will serve as a PIPEFITTER LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Job Description Job Description At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. ...
$35 - $38 per week
Job Description: Pitney Bowes is hiring an onsite direct hire full-time Senior Industrial Maintenance Technician, 2nd Shift in Levittown, Pennsylvania facility. Your hourly pay range is $35 - $38 paid weekly with possible overtime. Your 2nd Shift work schedule...Hourly payWeekly payFull timeCasual workLocal areaShift workAfternoon shift- Job Description Job Description Description This position involves troubleshooting and repairing all components of industrial ammonia refrigeration systems and equipment. Our ideal service technician will have experience with screw and reciprocating compressors, evaporators...
- Job Description Job Description McHales has been serving homeowners in Levittown and the Bucks County area for over 70 years. We’ve built our reputation on quality workmanship, honesty, and exceptional customer service. As we continue to grow, we’re looking for an ...Hourly payTemporary work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!


