WWTP Operator I,II,III,IV
$51.07k - $76.61kUnion County, NC
The Wastewater Treatment Plant Operator I, under close supervision, assist in the operation of the wastewater treatment plant. This is accomplished by working an assigned shift at the plant; learning from other operators about plant equipment and/or processes and assisting with monitoring equipment and processes for proper operations. Other duties include following all safety rules and protocols; maintaining records; and making rounds of the specific process or processes assigned. Pay ranges and qualifications are listed below for all levels of a Wastewater Treat Plant Operator. Assists with and after completion of training performs process control activities by collecting, testing, and analyzing process control samples; analyzing biological bacteria; conducting settle-ability tests; collecting composite samples; monitoring sludge blanket levels; using automatic samplers for permit compliance; and running additional tests as needed to ensure proper process control. Assists with and after completion of training monitors SCADA computer workstations for plant equipment and process conditions; maintains flows and loading by continuously monitoring dissolved oxygen, MLSS, return activated sludge rates, ammonia levels, suspended solids levels, alkalinity levels, chlorine residuals and dosage, wasting rates, flows, digester temperatures and levels, chemical feed rates, methane gas pressure and flows, and other process indicators. Assists with and after completion of training operates the plant by inspecting a wide range of various wastewater equipment for noise, vibration, and any abnormal operating characteristics; performing minor maintenance and preventive maintenance tasks; adjusting flows and chemical feed rates; completing rounds and recording operational data; monitoring SCADA data for daily trends; operating various type pumping systems , aeration systems,, bar screens, grit systems, sand filters, centrifuges, and other plant equipment; briefing other operators at shift change; and assisting maintenance staff with shut down and startup of equipment. Performs administrative and housekeeping duties by reading and studying the plant O&M manuals and SOP’s; participating in hands‑on training; maintaining daily log entries; completing required housekeeping tasks; completing monthly safety checks; and Grade I Wastewater Operator license. Performs other related duties as assigned. Must have a valid Driver's License and be able to maintain a safe driving history as defined by the Union County Vehicle Use Policy. WWTP Operator I (Salary range $51,074 - $76,611): Requires a High School Diploma or an acceptable equivalency diploma (GED), and no required experience; or equivalent combination of education and experience. NC Grade I Biological Water Pollution Control System Operator Certification or the ability to obtain within 12 months. Must obtain an NC Grade II Biological Water Pollution Control System Operator Certification within 18 months of date of hire. WWTP Operator II (Salary range $57,203 - $85,804): Requires a High School Diploma or an acceptable equivalency diploma (GED), and six (6) months of experience at a Grade II or higher biological water pollution control system; or equivalent combination of education and experience. Requires a NC Grade II Biological Water Pollution Control System Operator certification. WWTP Operator III (Salary range $61,207 - $91,810): Requires a High School Diploma or an acceptable equivalency diploma (GED), and two (2) years of experience at a Grade II or higher biological water pollution control system. Requires certification as a Grade III Biological Water Pollution Control System Operator. WWTP Operator IV (Salary range $66,103 - $99,155): Requires a High School Diploma or an acceptable equivalency diploma (GED), and three (3) years of experience at a Grade III or higher biological water pollution control system; or equivalent combination of education and experience. Requires certification as a NC Biological Water Pollution Control System Grade IV Operator. PHYSICAL DEMANDS Must be physically able to operate a variety of machinery, equipment and tools including computers, calculators, radios, typewriters, compactors, etc. Must be physically able to operate a motor vehicle. Must be able to exert up to 150 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 25 pounds of force constantly to move objects. Requires the ability to maintain body equilibrium when bending, stooping, crouching, climbing, reaching and/or stretching arms, legs or other parts of body to grasp, push, pull or otherwise move objects. WORK ENVIRONMENT Work is performed in a dynamic environment that requires the need to be sensitive to change and responsive to changing goals, priorities, and needs. #J-18808-Ljbffr Union County, NC
- Performs semiskilled work operating a variety of medium to heavy equipment needed for the installation, repair, and maintenance of water and wastewater systems and appurtenances; does related work as required. Work is performed under the supervision of a Water Distribution...SuggestedRemote work
- ...Job Description Job Description Description: Equipment Operator III We are seeking a skilled and experienced Equipment Operator III to join our dynamic team. This role offers an excellent opportunity for professionals who are committed to safety, efficiency,...Suggested
- ...charts, tables, various types of measuring instruments and scales. Ability to read and interpret documents such as safety rules, operating maintenance instructions, and procedure manuals. Ability to define routine problems, collect data, establish facts, and draw valid...Suggested
- CIRCOR International, Inc. in Monroe, NC is seeking a Warehouse Associate to support logistics operations, including receiving, storing, picking and shipping parts and materials to production lines and customers. You will follow verbal and written instructions, read drawings...Suggested
- Water Treatment Plant OperatorPerforms semiskilled work operating a water treatment plant; does related work as required. Work is performed... ...and on-the-job training to ensure timely attainment of Class II operator certification. Performs plant maintenance, bulk chemical...Suggested
$25.51 per hour
...diverse people around the world. Here, you will make an impact by: Operating CNC Lathe and Mills; has knowledge and able to run multiple... ...setting offsets; may receive assistance from Team Lead or Machinist III; expected to know proper collet, tool holders and tool holding...Hourly payH1bRelocation packageFlexible hoursAfternoon shift- The City of Monroe, NC, is seeking a skilled equipment operator to perform semiskilled work operating medium to heavy equipment for water and wastewater systems. You will work under the supervision of a Crew Leader and perform tasks in inclement conditions. Responsibilities...
$55k - $75k
...Description Salary based on the depth of construction experience - Salary Range - $55,000 to $75,000 -Summary/Objective- Excavator Operator -Candidates should have at least 3 years of experience operating excavators (operating weight 20,000 lbs. or more) on pipeline...Full timeTemporary workNight shiftWeekend work- ...documents and select proper cutting tools. Must be able to work on projects individually or as a team. Must be familiar with the operation of Bridgeport milling machines, horizontal milling machines, vertical milling machines, engine lathes, surface grinders and inspection...Permanent employmentFull timeLocal areaMonday to ThursdayWeekend work
$25 - $30 per hour
...Machinist jobs in Monroe where precision, technology, and craftsmanship come together? This opportunity lets you program, set up, and operate CNC equipment to manufacture high-quality components while supporting efficient production and exceptional quality. Job Duties...Hourly payWeekly payImmediate startMonday to FridayShift work- ...heaters and perform trial runs. Determine appropriate voltage, current, frequency, feed rates, speed, coil type, and water flow for operations. Inspect sample pieces for hardness and distortion; interpret results to ensure proper hardening techniques. Utilize...
- Globe Communications LLC is seeking an Equipment Operator to operate bucket trucks and aerial lift equipment for telecom installations and repairs. You will ensure precision, safety, and efficiency while working on overhead lines and underground utilities. Responsibilities...
- ...is a direct hire, full-time position located in Monroe, North Carolina. The candidate will be responsible for setting up and operating large and small vertical CNC machining centers to make precision parts. The candidate must be able to work efficiently to produce...Full timeLocal areaMonday to ThursdayWeekend work
- ...Construction Management Team is seeking a Transportation Technician IV to perform work as a lead inspector responsible for supervision... ...and Responsibilities Perform inspection of contractor's operations on a variety of transportation projects including roadway and...For contractorsFor subcontractorH1bLocal area
- ...Construction Management Team is seeking a Transportation Technician IV to perform work as a lead inspector responsible for supervision... ...and Responsibilities Perform inspection of contractor’s operations on a variety of transportation projects including roadway and bridge...For contractorsFor subcontractorH1bLocal area
- Discover a more connected career At Globe Communications, as an Equipment Operator you will operate bucket trucks and other aerial lift equipment to install, maintain, and repair telecom infrastructure. Your role involves ensuring precision and safety while working on...Weekend work
- ...and reliable Bilingual CNC Stone Cutter for our 2nd shift (2:00 PM – 10:00 PM) to join our fabrication team. This role involves operating CNC machines to cut, shape, and finish granite, marble, quartz, and other natural or engineered stone surfaces. The ideal...Flexible hoursAfternoon shift
- ...relocation packages available We are currently seeking experienced LVL II CR NDT Technicians for full-time work in Monroe, NC . Candidates... ...work independently while supporting production and inspection operations in fast-paced environments. Employment Type Full-Time...Full timeLocal areaRelocationRelocation packageShift work
- ...Job Description Job Description Short Description Operates a CNC machining station, processing parts from the initial reception of rough castings to the visual inspection and gauging of precision product. Interfaces with CNC controls and understands how they relate...Shift work
- CentiMark Corporation is seeking an experienced Crane Operator for our New Construction Division in Monroe, NC. The role involves operating a 32 ft, 25-ton boom truck with a 101-foot crane, loading and unloading equipment, and coordinating with field and office personnel...Work at officeWeekend work
$18.5 per hour
...Join Adecco as a dedicated Machine Operator and become an essential part of a dynamic manufacturing team in Monroe, NC. This role offers competitive pay of $18.50 per hour and provides an excellent opportunity for career growth within a safety-conscious environment that...Hourly payTemporary workLocal areaShift workNight shiftDay shift$16.07 - $17.07 per hour
...Production Assistant Monroe, NC You won't just be operating machinery—you'll be at the heart of their craft. If you have a meticulous eye for detail, a mechanical aptitude, and a commitment to quality, this is your chance to contribute to a world-class textile manufacturing...Weekly pay$18.51 per hour
...an experienced and eager production assistant to join their growing team! The Production Assistant supports the Multistage Operator and Second Operator in running multi-stage presses efficiently and safely while ensuring products meet quality standards. This position...Hourly payTemporary workLocal areaShift work$19 - $21 per hour
...Production Operator Monroe, North Carolina, United States About the Job Print Shop Operator Monroe, NC | $19$21/hr | 2 Days On / 2 Days Off Rotating Shifts (A, B, C, D) Day and Night shift Join a growing global packaging manufacturer producing plastic tubs and lids in...Night shiftRotating shiftDay shift$18.5 per hour
...Job Description Job Description Join Adecco as a dedicated Machine Operator and become an essential part of a dynamic manufacturing team in Monroe, NC. This role offers competitive pay of $18.50 per hour and provides an excellent opportunity for career growth within...Hourly payTemporary workLocal areaShift workNight shiftDay shift- ...responsible for producing high-quality machined components using CNC equipment and machining skills. The role involves machine setup, operation, inspection, troubleshooting, and maintaining production quality standards in a manufacturing environment. CNC, HMC, lathe, or...
- Globe Communications LLC is seeking an Equipment Operator for our Telecom Construction team. You will operate, maintain, and monitor specialized machinery used for installing phone and internet infrastructure, ensuring safety and efficiency on site. The role requires a...
- Performs intermediate work operating a variety of medium to heavy automotive and construction equipment; does related work as required. Work is performed under moderate supervision of the assigned supervisor. Supervision may be exercised over assigned personnel. This is...
- The City of Monroe, NC is seeking a versatile equipment operator to perform intermediate work operating a variety of medium to heavy equipment including lawnmowers, backhoes, tractors, loaders, and diggers. Under moderate supervision, you will perform routine maintenance...
$50k - $60k
...bonus structure, and depth of construction experience ). Responsibilities: Conduct pre-trip safety inspections of the truck. Operate the truck safely, adhering to all traffic laws and company policies. Haul various materials and equipment to and from job sites....Full timeFor contractors
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to WWTP Operator I,II,III,IV. Be the first to apply!



