UAS Drone Pilot III

Acuren is seeking UAS Pilot III to support operations in Cincinnati, OH. (RELOCATION ASSISTANCE AVAILABLE FOR QUALIFIED APPLICANTS)

As a senior UAS Pilot III in the electrical infrastructure inspection domain, you will lead advanced aerial inspection missions, manage UAS operations in complex environments, drive data interpretation, and mentor junior pilots. You will ensure inspection integrity, support decision-making for maintenance/asset management, and champion UAS operational excellence across the program.

The ideal candidate has a strong understanding of GO 95 and GO 165 requirements, FAA Part 107 operations, and utility inspection procedures. This position is critical in supporting system reliability, safety, and regulatory compliance through aerial data collection.

Lead mission planning for complex inspection operations: large transmission corridors, multi-state projects, energized lines, remote/off-grid substations, or difficult terrain. Include risk assessments, airspace coordination, emergency procedures, launch/recovery zone planning, payload configuration (e.g., thermal, LiDAR, NDT sensors).
• Pilot advanced UAS platforms and payloads, possibly beyond visual line-of-sight (BVLOS) or using special waivers, under company/regulatory policy; optimize sensor suite for electrical infrastructure inspection (visual, thermal, LiDAR, corrosion sensors).
• Oversee pre-flight inspections and operational readiness: verify UAS systems, sensor calibration, redundancy/backup plans, communications links, site access procedures, safety checklists.
• Conduct high-quality data capture for inspection of towers, lines, substations, including anomaly detection (e.g., conductor vibration, hot spots, tower corrosion, insulator flashover risk, tower hardware stress).
• Lead post-flight data processing workflow: ensure imagery/sensor data is properly ingested, triaged, annotated and delivered. Provide technical interpretation of findings, prepare detailed inspection reports for engineering/asset management teams.
• Drive decision-making: collaborate with engineers to prioritize maintenance, support defect classification, estimate repair urgency, contribute to asset life-cycle management strategies.
• Manage and maintain UAS fleet: define maintenance schedules, upgrade paths, sensor integration, budget planning for UAS operations.
• Train, mentor, and certify junior pilots (Levels I & II), develop training curriculum, ensure compliance with SOPs, best practices, operational safety culture.
• Develop and refine operational SOPs, safety protocols, regulatory compliance frameworks (including FAA waivers, airspace, site-specific authorizations), and continuous improvement initiatives.
• Represent the UAS inspection program to stakeholders: utility clients, regulatory bodies, internal leadership; communicate findings, metrics, safety performance, cost savings, risk mitigation.\
• Operate small unmanned aerial systems (sUAS) to inspect electrical infrastructure in accordance with FAA Part 107, company safety procedures, and project work plans.
• Plan, execute, and document aerial missions across varied terrain, including rural, mountainous, and urban environments.
• Capture high-resolution imagery for inspection and analysis of electrical transmission and distribution components.
• Ensure data quality and consistency following standard flight parameters and detailed capture requirements.
• Maintain detailed flight logs, mission reports, and equipment maintenance records.
• Manage data upload, storage, and transfer processes for timely integration with inspection workflows
• Coordinate with field inspectors, management, and safety personnel to optimize field efficiency and ensure compliant operations.
• Collaborate with inspection team (engineers, technicians, site managers) to schedule missions, coordinate ground support, access site permissions, and ensure safe launch/recovery zones.
• Follow continuous improvement: stay current with UAS technologies, sensor payloads (e.g., LiDAR, thermal imaging), inspection best practices and regulatory changes.
• Comply with airspace authorizations, waiver requirements, and local jurisdiction flight restrictions.

Other work duties as assigned.

KNOWLEDGE, SKILLS & ABILITIES:

• Recognized as subject-matter expert in UAS inspections within the electrical infrastructure domain; leads complex missions and fleets rather than only executing flights.
• Has decision-making authority for mission go-/no-go, equipment procurement, training of staff, and client/sponsor reporting.
• Responsible for integrating UAS inspection data into strategic asset-management workflows, not just collecting data.
• Demonstrable experience flying UAS in challenging field conditions (remote terrain, near energized lines/towers, variable weather).
• Proficiency with UAS flight planning software (waypoints, automated missions), and data capture workflows.
• Basic knowledge of electrical infrastructure (transmission towers, poles, substations) and associated hazards (electrical safety, fall zones, climbing operations) is strongly preferred.
• Strong situational awareness, spatial/hand-eye coordination, attention to detail in flight operations and data capture.
• Good interpersonal and communication skills: able to work with field teams, site managers, and engineers; present findings clearly.

EDUCATION:

• 5+ years of work experience operating UAS commercially, preferably in infrastructure inspection, utilities or similar environment.
• Valid FAA Remote Pilot Certificate (Part 107) or equivalent regulatory certification for commercial UAS operations.

• Competitive Salary
• Medical, dental, and supplemental insurance
• 401K Plan
• Paid Holidays
• Paid Time Off

• Outdoor work in varying and sometimes extreme weather (heat, cold, wind, rain, snow) while maintaining flight and safety standards.
• Exposure to electrical hazards, electromagnetic fields, and high-voltage environments-must maintain required safety clearances and PPE use.
• Frequent travel to inspection sites, including remote or rural locations; may require overnight stays or extended assignments.
• Occasional work at heights, near energized infrastructure, or within confined/controlled areas (e.g., substations).
• Extended concentration and situational awareness needed during flight operations to monitor aircraft position, airspace, and obstacles.
• Ability to wear and operate while using personal protective equipment (PPE) such as hard hats, safety glasses, high-visibility vests, gloves, and hearing protection as required by site safety rules.

PHYSICAL JOB REQUIREMENTS & DEMANDS:

• Ability to stand, walk, and operate equipment for extended periods (up to 8-10 hours per day) in outdoor environments.
• Manual dexterity and hand-eye coordination to safely control drones, operate handheld controllers, tablets, and sensor payloads.
• Visual acuity (with or without corrective lenses) sufficient to maintain visual line of sight (VLOS) with UAS, assess airspace conditions, and evaluate imagery for quality and accuracy.
• Auditory ability to hear and respond to commands, communications, and environmental sounds (e.g., approaching vehicles, equipment, or other hazards).

Acuren's strength begins with its people. Guided by our values- People First, Integrity Always, One Team, Higher Standards, and Innovative -we work to create safe, respectful, and high-performing environments for our employees, clients, and communities.

We are honored that our people have recognized Acuren as worthy of inclusion in the Forbes 2024 and 2025 list of Canada's Best Employers. This recognition reflects the importance we place on investing in our people, protecting everyone we work with, and acting with integrity in every engagement.

Acuren delivers comprehensive inspection, testing, certification, and asset integrity solutions that help organizations ensure critical assets are safe, compliant, and optimized for reliable performance. Our specialized expertise and advanced capabilities support clients across energy, industrial, and public infrastructure sectors.

Our services include inspection; traditional and advanced NDE/NDT; failure analysis; rope access; materials, field, and reliability engineering; drones; robotics; V-Deck; and condition-based monitoring. Through these capabilities, we help clients evaluate asset condition, manage operational risk, and make informed decisions throughout the asset lifecycle.

Our work supports the integrity and safety of assets across petroleum refining, pipelines, power generation, pulp and paper, mining, pharmaceutical, aerospace, and automotive industries. Acuren employs more than 5,000 professionals who support mechanical integrity and inspection programs across industrial sectors.

Our approach is practical and focused: provide capable local teams with certified, well-equipped personnel supported by trained and experienced leaders. Building on a strong heritage of safety, quality, and professionalism, we continue to advance technical capabilities and support reliability programs that create value for clients and employees.

Accessibility accommodations are available to applicants upon request. The company uses AI-enabled tools to organize candidate responses; these tools may be used during the screening or assessment process. #LI-BE1