Relay Technician--minimum of 7 years of experience, 10 years preferred
$55 - $62 per hourPRIME Traffic Control
Job Description
· Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant.
· Perform relay panel risk assessments daily and apply human performance barriers as needed.
· Develop functional guidelines with an emphasis on human performance principles.
· Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses.
· Maintain and control proper use of Duke Energy issued TCA secure laptop.
· Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes.
· Apply approved LV control cable and fiber optic safe work practices.
• Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings.
• Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues.
• Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator.
• Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job.
• Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers.
• Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel.
• Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc...
• Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests.
• Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All “as-left” relay testing documentation will be saved and submitted to RCE.
• Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles.
• Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device.
· Relay technicians should have fiber optic splicing and termination abilities with CFOT certification.
• Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers.
• Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center
• Functionally test all relay and control circuits to verify proper operation during simulated fault conditions.
• Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center.
• Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment.
• When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment.
• Take In-Service readings of all new equipment as primary load is first applied.
• Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting.
• Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person.
• Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have.
• Schedule a meeting with the project engineers, if needed, to go over lessons learned.
• Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience
Job Description
Benefits:
- 401(k) matching
- Dental insurance
- Health insurance
- Paid time off
- Stock options plan
· Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant.
· Perform relay panel risk assessments daily and apply human performance barriers as needed.
· Develop functional guidelines with an emphasis on human performance principles.
· Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses.
· Maintain and control proper use of Duke Energy issued TCA secure laptop.
· Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes.
· Apply approved LV control cable and fiber optic safe work practices.
• Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings.
• Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues.
• Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator.
• Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job.
• Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers.
• Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel.
• Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc...
• Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests.
• Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All “as-left” relay testing documentation will be saved and submitted to RCE.
• Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles.
• Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device.
· Relay technicians should have fiber optic splicing and termination abilities with CFOT certification.
• Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers.
• Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center
• Functionally test all relay and control circuits to verify proper operation during simulated fault conditions.
• Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center.
• Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment.
• When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment.
• Take In-Service readings of all new equipment as primary load is first applied.
• Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting.
• Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person.
• Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have.
• Schedule a meeting with the project engineers, if needed, to go over lessons learned.
• Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Relay Technician--minimum of 7 years of experience, 10 years preferred in Ocala, FL vacancy
- ...Description Job Description HVAC Service Technician Southern Home Services is a... ...Required Qualifications: ~4-10+ years of HVAC experience, preferably with a focus on residential markets... ...~ Valid Driver’s License with a minimum of three years of driving experience...SuggestedBase plus commissionLocal areaFlexible hours
- ...office meetings.7. Responsible for... ...previous day for a minimum of ½ hour each... ...every new setup.10. Make sure all customers... ....E.D. equivalent preferred.Effective verbal... ...KNOWLEDGE/EXPERIENCE: Two (2) years of experience in... ...REQUIREMENTS: Service Technician...SuggestedFull timePart timeWork at officeDay shiftAfternoon shift
$55 - $62 per hour
...DescriptionJob DescriptionSENIOR and LEAD RELAY TECHNICIANS COMPANY:Full-service utility... ...401K, PTO, sick time and holidays, year-round job stability with no out-of-state... ...must have at least 7 years of relay experience, 10 years required for lead role.RESPONSIBILITIES...SuggestedDaily paidPermanent employmentFull time$20 - $30 per hour
...motivated, and quality-oriented individual with at least 2 years of experience in electrical work to join our growing electrical company,... ...record are encouraged to apply Experience: ~ Electrical Technician: 2 years (Required) License/Certification: ~ Driver's...SuggestedHourly payFull time- ...Description Job Description P&C Technician 1 or 2 Currently seeking... ...theory of operation of basic relays and protection systems,... ...microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Bachelor's Degree in...Suggested
$1,346.16 per month
...strong economy. Minimum Qualifications: High... ...driver's license. Four years of professional experience in facilities... ...professional experience. Preferred Qualifications:... ...and project work. The technician also assists with operations... ...by Rule 55A-7, Florida Administrative...ApprenticeshipWork at officeDay shift- ...Maintenance Technician in Ocala, FL The Collier... ...springs and experiences. It is home to the... ...contribution up to 10% of your gross income... ...during your first year with an annual increase... ...for at least 1 year preferred Strong work ethic... ...taught in "The 7 Habits of Highly Effective...Full timeSummer workFlexible hoursNight shift
- ...Hospital Services Technician $19/hr, Good Benefits, Day Shift, No Weekends... ...by such customers, and 2 years industry related experience in a customer service capacity preferred, or the equivalent in related... ...:00 am to 1:30 pm - working a 7 to 8 hr shift w/ 30 min lunch...Temporary workWork experience placementMonday to FridayShift workDay shift
- ...Mobile Diesel Technician Level II Cox Fleet keeps your fleet moving! Headquartered... ...Requirements: High School Diploma/GED and 3 years' experience in a related field. The right... ...: ~ ASE T8 (PMI) certification Preferred Certifications: ASE T3 (Drivetrain)...Weekly payCurrently hiringLocal area
- ...2026, for the 5th year in a row, Coke Florida... ...vacation pay, and 10 company paid... ...looking for a Fleet Technician based out of our Ocala... ...Friday 11:00 AM - 7:30 PM and Saturday... ...fleet maintenance experience Experience servicing... ...vehicle experience preferred ~ ASE...Full timeLocal area
- ...Job Information Skilled technicians are in high demand. To keep... ...Requirements: Education and/or Experience: High school diploma or GED... ...equivalency diploma) Minimum of 1 year experience or training; or... ...Manufacturer certification preferred but not required Benefits...TraineeshipLocal area
- ...equipment. Maintains a minimum set of tools required... ...completes required technician training classes. Diagnose... ...to modify one's preferred way of doing things.... ...Qualifications Education and Experience Formal Education:... ...Experience: 1-5 years experience Required...Casual workWork at officeImmediate startNight shiftWeekend work
- ...Squad Advanced Repair Technician (Agent), you'll work at... ...excellent customer experiences by listening to their... ...nights and weekends Preferred qualifications ~ Strong... .../non-exempt), and years of continued or bridged... ...Application deadline Minimum of 5 days from the...Hourly payFull timePart timeLocal areaWork from homeFlexible hoursNight shift
- ...also know that the best technicians never stop learning.... ...hours Work approximately 7:30 AM to 5:00 PM on weekdays... ...perspective Your experience matters, but so does your... ...by the company 5+ years of commercial refrigeration... ...service experience is preferred; candidates with 3–4 years...Work at officeLocal areaWeekday work
$16.5 per hour
...scheduled between 7:00 a.m. and 6:00 p... ...flexibility by providing a minimum of 20 hours of... ...ladders up to 10 feet Ability to... ...retail or merchandising experience is beneficial but... .... Experience Preferred Installation and merchandising... .... Over the past 31 years, our success has...Hourly payLocal areaMonday to FridayFlexible hoursShift workNight shiftEarly shift$50k - $75k
...environment? Our Repair Technicians man-handle pool leaks—... ...to make up to $75,000 year Permanent, full-time... ...years licensed driving experience. Drug screening, motor... ...Employer. RED RHINO has 10 locations throughout... ...business demands. At minimum, expect to travel for your...Permanent employmentFull timeWork experience placementNight shift- ...SummaryThe Automotive Technician plays a pivotal role within... ...– A8 within first two years of employment (Tests... ...for each test passed)Minimum QualificationsAbility... ..., and math skills.Preferred Qualifications2 years of automotive repair experience, completion of Vocational...Daily paidFull timeTemporary workPart timeLocal area
- ...experienced and highly motivated Maintenance Technician for our Multi -Family Property in... ...The Qualifications ~ Must be a minimum 18 years of age ~ High School degree or... ...~1-3 years previous maintenance experience desired preferably in a similar facility ~ HVAC, EPA...Full timeFlexible hoursShift workDay shift
- ...Education / Requirements: Must be at least 21 years of age. Must pass a pre-employment drug... ...with an acceptable driving record (CDL preferred but not required). Possible overtime may be required. Experience with heavy-duty/commercial tires preferred, but...Flexible hoursAfternoon shift
- ..., you must (1) be at least 18 years of age; (2) be legally authorized... ...; (3) possess 2 years of experience and/or training in automotive... ...additional qualifications are preferred: (1) state inspection license(... ...OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during...Weekly payFull timeImmediate start
- ..., you must (1) be at least 18 years of age; (2) be legally authorized... ...; (3) possess 2 years of experience and/or training in automotive... ...additional qualifications are preferred: (1) state inspection license(... ...OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during...Weekly payFull timeImmediate start
- ...lists for more than six years, and have remained on... ...looking for in a Maintenance Technician Candidate: Excellent... ...equipment. Prior experience in campground... ...High School Diploma preferred. High level of attention... ...To positively impact 10 million lives by funding...Full timeImmediate startWeekend workAfternoon shift
- ...hours of paid time off during your first year of employment ~ Up to 32 hours of... ...What We're Looking For Education and Experience High School Diploma or GED required... ...apprenticeship or work experience preferred but not required experience in TIG and...ApprenticeshipWork experience placementNight shift
- ...Role:The Automotive Tint Technician plays a critical role... ...improve the driving experience and protect vehicle interiors... ...from UV damage.Minimum Qualifications:High school... ...’s license.Minimum 2 years of verified hands on... ...and dealerships.Preferred Qualifications:Certification...Local area
- ...Description Lead Home Service Technician / Handyman Role: Lead Home Service... ...within scope) Who You Are ● 10+ years of hands-on home repair or construction experience ● Experience managing or mentoring other technicians is preferred ● Strong communication and...Work at officeFlexible hours
- ..., you must: Be at least 18 years of age and legally authorized... ...automotive repair and maintenance experience and/or training , or an... ...automotive and undercar repairs Preferred: State inspection license(s)... ...OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in...Weekly payFull timeImmediate start
$65k
...EY Entrepreneur of the Year Midwest award winner... ...Certification in body repair preferred. Knowledge of... ...related knowledge, skills, experience, relevant... ...guaranteed to meet local minimum wage requirements for... ...3085 Category Body Technician Position Type Regular...Minimum wageFull timeApprenticeshipLocal areaRemote work$20 - $25 per hour
...HiFyve is hiring a Maintenance & Installation Technician in the Manufacturing industry in Ocala, FL!... ...Electrical, Mechanical Technology, or related field preferred • 5–7 years of combined mechanical and electrical experience in a manufacturing, industrial, military, or...Work at officeFlexible hoursShift workDay shift- ...hours of paid time off during your first year of employmentUp to 32 hours of sick time... ...We're Looking For:Education and Experience:High School Diploma or GED requiredTechnical... ...equivalent apprenticeship or work experience preferred but not required experience in TIG and...ApprenticeshipWork experience placementNight shift
- ...positions to act as field service technicians. Mechanical or plumbing service experience is helpful, but we will train the... ...using hand or power tools.Minimum Requirements: High school diploma... ...insurance. Culligan has over 80 years of experience in the design and distribution...Worldwide
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Relay Technician--minimum of 7 years of experience, 10 years preferred. Be the first to apply!
Related searches




