Relay Technician--minimum of 7 years of experience, 10 years preferred
$55 - $62 per hourPRIME Traffic Control
Job Description
· Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant.
· Perform relay panel risk assessments daily and apply human performance barriers as needed.
· Develop functional guidelines with an emphasis on human performance principles.
· Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses.
· Maintain and control proper use of Duke Energy issued TCA secure laptop.
· Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes.
· Apply approved LV control cable and fiber optic safe work practices.
• Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings.
• Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues.
• Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator.
• Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job.
• Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers.
• Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel.
• Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc...
• Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests.
• Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All “as-left” relay testing documentation will be saved and submitted to RCE.
• Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles.
• Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device.
· Relay technicians should have fiber optic splicing and termination abilities with CFOT certification.
• Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers.
• Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center
• Functionally test all relay and control circuits to verify proper operation during simulated fault conditions.
• Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center.
• Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment.
• When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment.
• Take In-Service readings of all new equipment as primary load is first applied.
• Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting.
• Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person.
• Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have.
• Schedule a meeting with the project engineers, if needed, to go over lessons learned.
• Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience
Job Description
Benefits:
- 401(k) matching
- Dental insurance
- Health insurance
- Paid time off
- Stock options plan
· Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant.
· Perform relay panel risk assessments daily and apply human performance barriers as needed.
· Develop functional guidelines with an emphasis on human performance principles.
· Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses.
· Maintain and control proper use of Duke Energy issued TCA secure laptop.
· Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes.
· Apply approved LV control cable and fiber optic safe work practices.
• Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings.
• Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues.
• Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator.
• Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job.
• Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers.
• Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel.
• Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc...
• Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests.
• Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All “as-left” relay testing documentation will be saved and submitted to RCE.
• Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles.
• Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device.
· Relay technicians should have fiber optic splicing and termination abilities with CFOT certification.
• Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers.
• Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center
• Functionally test all relay and control circuits to verify proper operation during simulated fault conditions.
• Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center.
• Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment.
• When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment.
• Take In-Service readings of all new equipment as primary load is first applied.
• Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting.
• Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person.
• Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have.
• Schedule a meeting with the project engineers, if needed, to go over lessons learned.
• Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Relay Technician--minimum of 7 years of experience, 10 years preferred in Homestead, FL vacancy
$58.7k - $88.1k
...a Field Service Technician to join our team... ...enhanced customer experience and measurable customer... ..., consisting of 10-hour shifts.... ...and operations Minimum Qualifications:... ...equivalent ~2 years of service-related... ...disability. Preferred Qualifications:...SuggestedHourly payMinimum wageFull timeTemporary workLocal areaVisa sponsorshipShift workNight shiftWeekend work- ...Description Construction Technician ID: NPSSFNR-001-0... ....00 Hours/Week: 24 Minimum Age: 55 For over 25 years, National... ...Minimum of 15 year(s) of experience in construction or... ...experience of 10 year(s) in designing... ...remote environments preferably wetlands A valid...SuggestedFull timeTemporary workPart timeRemote work
$20 - $32 per hour
...Job Description HVAC Technician and Installer Company... ...* Rate based on experience (time and a half available... ...HVAC: 5 year experience (Required)... ...(Required) Spanish (Preferred) Driver’s License (Required... ...and able to work with minimum supervision ~ Periodically...SuggestedBi-weekly payHourly payDaily paidFull timeContract workTemporary workPart timeLocal areaFlexible hours- ...Aquaponic Garden Technician is responsible for... ...locally grown food year-round. Beyond crop... ...issues early and relay any quality or... ...applicable law. MINIMUM QUALIFICATIONS... ...and Abilities Experience in horticulture, aquaponics... ...Driver's License preferred; ability to work...SuggestedImmediate startMonday to FridayWeekend workAfternoon shift
- ...upkeep of the facility. The Maintenance Technician assists the Maintenance Manager in... ...; some college or college graduate preferred ~2+ years experience in maintenance or similar position... ...valid driver's license Must be a minimum of 21 years of age Must be approved...SuggestedDaily paidFlexible hours
- ...Maintenance Technician - Instrumentation & Controls Itinerant... ...Local Candidate Strongly Preferred Relocation Assistance is... ...provided Solid knowledge and experience in calibrating, maintaining... ...plant or Navy environment (minimum of 2 years) Proficiency in I&C skills...Local areaRelocation packageDay shift
- .... We are presently seeking a Maintenance Technician for our Cottage Grove community located in Miami... .... Perform other duties as assigned. Minimum Requirements A minimum of 2 years of maintenance experience, preferred. High School Diploma or GED preferred....Temporary workSeasonal workLocal areaImmediate startFlexible hours
- ...Associates by Top Echelon. Required Qualifications · Minimum 5 years of hands-on experience in industrial maintenance. · Proven experience... ...working under pressure during production downtime. Preferred · Experience in food or beverage manufacturing ....
- ...1 Required Travel: 0 – 10% Employment Type: Full-... ...Applies advanced knowledge and experience to solve unusually complex... ...existing simulators. Minimum Qualifications ~5 years relevant experience with a... ...be a US citizen. Preferred Requirements Current CompTIA...Full timeFor contractorsWork at officeLocal area
- ...properly. Records variances. 7 Conducts daily calibration of... ...at the center if applicable. 10 Maintains clean efficient... ...diploma or equivalent required Experience Minimum of three (3) months experience... ...or warehouse environment preferred or equivalent combination of...Immediate start
$900 - $1,500 per week
...looking for Appliance Repair Technicians. Apply today! If you value... ...to deliver a great customer experience, showing empathy toward the customer... ...The following are the minimum requirements to be considered... ...Previous experience of one year or more in appliance repair is...ApprenticeshipWeekend work- ...Entry Level Automotive Technician Goodyear owns and operates... ...you will gain hands-on experience in one of Goodyear's... ...our stores may be open 7 days a week, which may... ...and be at least 18 years of age Candidates must... ...and procedures Preferred Qualifications: High...Shift work
- ...Service Technician The Service Technician operates a company service truck and drives to various locations to service... ...future needs are satisfied. Qualifications: Minimum two years of commercial driving experience. Valid CDL. Excellent time management,...Flexible hoursShift work
$20 - $23 per hour
...Join Toshiba America Business Solutions as a Field Service Technician II in Miami Lakes, FL. You’ll work with industry-... ...What You’ll Bring ~ High School Diploma or GED ~3+ years of experience in technical repair, service, installation, training, or support...Hourly payInternshipWork at office$22.9 - $45.27 per hour
...Lead Technician The Lead Technician position requires your experience and technical expertise to diagnose drivability... ...the applicable minimum wage requirements.... ...– A8 within first two years of employment. (Tests... ...writing and math skills. Preferred Qualifications ~...Daily paidMinimum wagePrice workTemporary workLocal areaFlexible hours- ..., you must (1) be at least 18 years of age; (2) be legally authorized... ...; (3) possess 2 years of experience and/or training in automotive... ...additional qualifications are preferred: (1) state inspection license(... ...OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in...Weekly payFull timeImmediate start
- ...able to work independently and without supervision -5+ years of experience preferred WHAT WE OFFER -Competitive Salaries with performance... ...Family Atmosphere. Positions Looking to fill -Junior technician (Commercial 50 tons and under) -Senior technician (...
$91.85k - $128.59k
...long-term strategic plans Minimum Qualifications: ~ B.S.... ...an engineering degree ~2+ years of experience in an engineering, supply chain... ...refugee or granted asylum. Preferred Qualifications: Master’s... ...that meets or exceeds 10,001 lbs. and/or transports...Permanent employmentFull timeTemporary workLocal areaRelocationWeekend work- ..., you must (1) be at least 18 years of age; (2) be legally authorized... ...; (3) possess 2 years of experience and/or training in automotive... ...additional qualifications are preferred: (1) state inspection license(... ...OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in...Weekly payFull timeImmediate start
- ...Electrical / Environmental Technician III Responsible for depot... ...A Bachelor's degree plus 3 years of related experience in avionics or electro-... ...-16 experience is strongly preferred, but other fighter jet experience... ...be considered. At least a 7 Skill Level or equivalent...Full timeWork at office
- ...for you! As a Cultivation Technician you will provide the expert... ...oil). Qualifications Minimum of a high school diploma or... ...degree or certifications preferred Prior cannabis experience not required. Additional Requirements... ...Must be a minimum of 21 years of age Must possess valid...
$15 - $45 per hour
...Homestead-FL Zip Code(s): 33032 Minimum Level of Education: Not Applicable Minimum Years of Experience: 2 Company Overview LSF... ...helpful, CDL license preferred ~ Must have tools for the job... ...Vision Insurance Schedule: ~10 Hour Shift ~12 Hour Shift...Hourly payFull timeLocal areaMonday to FridayFlexible hoursShift workNight shiftDay shift$9.1k
...Additional promotions with 5–10% pay increases based... ...to $6,400 your first year, and up to $9,100... ...Competencies, and Key Experiences (What you’ll bring) What... ...posting will be active for a minimum of 3 days. The active... ...and Sling TV. Our Technicians deliver TV and Smart...Hourly payLocal areaFlexible hoursAfternoon shift$20 - $24 per hour
...Description Work Hours: 8 hour minimum work day with opportunity for... ...a valid CDL, increasing with experience and licensure. Overtime/OT... ...service Holidays: New Year's Day, Memorial Day, July 4th... ...skills. Driller Assistant Preferences: CDL or relevant certifications...Daily paidWork at officeWeekend work- ...Tech Support is seeking skilled, driven technicians to support our growing national... ...service requests within your territory Preferred Skills & Experience PC and printer troubleshooting... ...(a strong plus) At least 1 year of I.T. or Telecom experience , and...Hourly payFor contractorsImmediate startFlexible hours
- ...opportunity for a Full-Time Maintenance Technician ! We are seeking a driven individual... ...training in maintenance or related field preferred. Experience in facility maintenance or a similar... ...- 401(k) with employer match (19 years of age and older). Time Off - Paid time...Full timeFor contractorsLocal areaFlexible hoursAfternoon shift
- ...Maintenance Technician - Instrumentation & Controls Itinerant... ...to 800 hours per year. Employees are offered... ...Candidate Strongly Preferred Relocation Assistance... ...Solid knowledge and experience in calibrating, maintaining... ...or Navy environment (minimum of 2 years)...Daily paidFor contractorsLocal areaRelocationRelocation packageMonday to FridayDay shift
- ...SummaryThe Automotive Technician plays a pivotal role within... ...– A8 within first two years of employment (Tests... ...for each test passed)Minimum QualificationsAbility... ..., and math skills.Preferred Qualifications2 years of automotive repair experience, completion of Vocational...Daily paidTemporary workLocal area
- ...customer-oriented Plumbing Service Technician to join our growing team. In... ...an outstanding service experience. If you take pride in your craftsmanship... ...[Insert number, e.g., 2–5+] years of hands-on experience in... ...Bilingual (English/Spanish) preferred but not required....For contractorsLocal area
$35 per hour
...Service Technicians ** $35+ per hour pending certification levels** **$3000 signing bonus** Dadeland... ...: Stable Auto Mechanic work history: 2 years of experience required Automotive Service Excellence (ASE) certifications preferred Ability to diagnose and repair engine,...Hourly payTemporary workRelocation package
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Relay Technician--minimum of 7 years of experience, 10 years preferred. Be the first to apply!
Related searches
- hospital technician Homestead, FL
- product development technician Homestead, FL
- logistics technician Homestead, FL
- safety technician Homestead, FL
- control technician Homestead, FL
- icu technician Homestead, FL
- human resources technician Homestead, FL
- technician Homestead, FL
- data center operations technician Homestead, FL
- landscape technician Homestead, FL





