Peeler Operator_Large Line

“E”ssential

“S”econdary

% of Time

Description

E

45%

Set-up, operate, troubleshoot and make necessary adjustments to the Mixer machine following established procedures and guidelines with minimal supervision to mix/mold material.

• Conduct a visual inspection and perform general preventive maintenance of the mixer and press area
• Review order and verify all EPDM & formulas are correct/match
• Gather all necessary materials
• Read/review formula, weigh out materials and place in auger
• Pump oil & water as necessary per formula specifications
• Operate the Mixer control panel
• Wait required time for mixture to complete
• Pour mixture into mold
• Using chain crane, place lid on mold
• Using hydraulic press, press mold to proper length

Operate (Mixer, Scale, Press, Mold Lift, Hoists, and Polymer System); Clean as per manufacture specification and SOP

E

18%

Adhere to and follow all quality guidelines. Continually check product for quality throughout the manufacturing process.

E

10%

Operate hoist, hydraulic press, bucket truck and fork truck to lift/transport raw materials and finished products while adhering to all power industrial equipment rules and safety requirements

E

10%

Maintain clean work environment by wiping down machine and cleaning work area with air hose after each order; operate grinding machine as necessary; maintain machine as required and reporting any maintenance issues immediately to supervisor and maintenance department

E

5%

Transfer and separate EPDM bags per mold specification; open bags and pour into hopper

5%

Utilize computer at workstation to login, enter/review production data and work orders as required

E

5%

Provides constant communication with the management staff concerning the production status of high-end quality oriented materials

E

2%

Cross-train into other job functions providing assistance as necessary within the department

100%

Work Environment:

The work environment characteristics below are representative of those that an employee encounters while performing the essential functions of the job.

• Manufacturing Environment: This position may operate in a manufacturing setting with conditions of high-pressure air/steam/gas, hazardous gas/chemical fumes, extreme heat and temperature variations, loud noise, exposure to dangerous machinery, dirty work environment and/or exposure to dust (pigment). The position is required to wear PPE including, but not limited to safety glasses, steel toe/composite boots and earplugs.

Physical and Mental Demands:

The demands described are representative but not all inclusive of those demands that must be met by an employee (with or without a reasonable accommodation) to successfully perform the essential functions of the job.

• Prolonged periods of standing, walking, using tools, and performing repetitive actions that entail frequent bending, reaching, climbing, stooping, lifting, pounding, pushing and/or pulling. Move throughout the work location to comply with safety requirements.
• Exert up to 130 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move object.
• Manual dexterity to move material and operate equipment.
• Communicate effectively (write, speak) with supervisors and others on performance and safety concerns.
• Adequate hearing ability to receive work instruction and to respond to changes in work environment.
• Attention to detail to complete work assignments.
• Time management to comply with scheduled work time and maintain productivity requirements.
• Ability to understand and abide by safety policies and maintain a safe work environment. Ability to move throughout the work location to comply with safety requirements.