Inserter Operator II - 1st Shift
Impact Connects
Job Description
Job Description
Title: Inserter Operator II
Job Classification: Hourly, Non-exempt
Department: Lettershop Production
Reports To: Shift Supervisor and Manager Mailing Operations
Hours: 6 am - 2:30 pm, Monday - Friday
General purpose of Job: Effectively setup & run inserting equipment
Essential Duties & Responsibilities:
- Read & understand job instructions in the form of work tickets
- Know, follow & teach Letter Shop's Standard Operating Procedures
- Able to operate all inserting equipment properly & safely
- Responsible for the quality and quantity of each assigned job
- Act as lead for their machine's assigned workers (sorter/bagger and/or temps), responsible for correct, accurate & quality outcome of all tasks on their machine. Immediately report any production issues to shift supervisor.
- Performs efficient & correct set up on any inserter
- Ability to sort & containerize all classes of mail
- Able to read & understand all associated forms & paperwork
- Keep production areas clean at all times
- Able & willing to rotate to any position on the machine to facilitate training of lesser-experienced operators.
- Any other duties assigned by supervisor
Performance Measurement: Performance feedback will take place both verbally and written on a day-to-day as needed basis, recognition in monthly employee recognition meetings, formal training on changes in SOP as needed with a formal review by the supervisor at least annually
Education and/or Experience:
High school diploma or GED; 2-3 years of progressive Inserting experience.
Language and Math Skills:
Ability to read and write at a basic English level. Ability to communicate effectively with supervisors and other employees at a level necessary for the position. Ability to add & subtract two digit numbers and to multiply & divide with 10s & 100s.
Physical Demands:
Standing or walking most of the day, may climb, balance, stoop, kneel, crouch or crawl. Regularly lift up to 25 pounds, often lift up to 40 lbs and rarely up to 70 lbs. Constant use of hands and arms. Regularly reach with hands and arms, including reaching above shoulder level (Lifting/reaching above shoulder level would seldom be more than 5-10 pounds). Vision requirements are close vision, distance vision, peripheral vision, & ability to focus.
Work Environment:
Work near moving mechanical parts, fumes & air borne particles, risk of electrical shock, and exposure to toxic chemicals. The noise level is moderate to loud.
Benefits:
- Employee Ownership (ESOP): Build long-term wealth as an owner in the company
- Competitive Pay with opportunities for overtime
- Health Insurance: Medical, Dental, and Vision coverage
- Paid Time Off (PTO) and holidays
- 401(k) Retirement Plan with company match
Impact Connects is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by applicable law.
$30.24 - $40.32 per hour
...Fridley, Minnesota. The CNC Machinist II is responsible for setting up, adjusting, and operating numerically controlled machine... ...IF YOU ARE INTERESTED IN A 2ND SHIFT OPPORTUNITY. PLEASE NOTE THAT THIS... ...IS FOR 2ND SHIFT ONLY AND NOT 1ST SHIFT.$2,000 Sign on Bonus eligible...Day shiftRelocation packageShift workAfternoon shift$15.55 - $31.15 per hour
...Our 115,000 colleagues serve people in more than 160 countries. Operator II Divisional Information Structural Heart Business Mission: Why... ...completeness and accuracy May set-up/utilize special test equipment Shift Monday - Thursday, 4:00 am - 2:30 pm Required Qualifications...Day shiftHourly payShift work- ...Kurt Manufacturing seeks a CNC Machinist II to join our Machining Division in Minneapolis... ..., Minnesota. You will set up, adjust and operate CNC tools to produce precise parts in a... ...A sign-on bonus of $2,000 is available. Shift: Mon-Fri, 6:00 a.m.–2:30 p.m. #J-18808-Ljbffr...Day shiftRelocation packageShift work
$18 per hour
...Equipment Operator OpportunityStart a new career with us! Taylor Corporation is a growing, dynamic company with big plans for the future... ...knowledge of safety requirements of job and equipment.Your Shift: 1st Shift; Parttime, 6:00am - 2:00pmYou Must Have:Ability to set adjustable...Day shiftHourly payPart timeFlexible hoursShift work- ...printing requests for a major retail client. Shifts Available: 1st Shift - Monday - Friday 7:30am - 4:00pm... ...review and electronically log customer jobs Operate standard finishing equipment (e.g. paper cutters, inserters, laminating, and hole punchers) Operate...Day shiftMonday to FridayShift work
- ...Abbott in Minnesota is seeking a Machinist II to join the Woodridge: St. Paul facility... ...Heart division. You will set up, adjust and operate various machines to meet close tolerance... ...environment. The position offers a first shift (6am–2:30pm) with potential overtime, competitive...Day shift
$30 - $39 per hour
...Description Job Description SWISS CNC MACHINIST II - WEEKEND DAYS Brooklyn Park, MN... ...Swiss CNC Machinist II to its weekend day shift in Brooklyn Park. You will set up and run... ...work instructions and set up sheets - Operate Swiss machines up to 9 axis per manufacturer...Day shiftContract workTemporary workCasual workH1bShift workWeekend work$21.55 - $43.05 per hour
...in more than 160 countries. Machinist II Working at Abbott At Abbott, you can... ...for setting up, adjusting, and operating standards and special types of machines to... ...customers, contractors, and vendors. Shift First shift, 5 8's; 6am to 2:30pm. Potential...Day shiftHourly payFor contractorsWork at officeLocal areaWorldwideShift work$54.56k - $70.72k
...CNC Machine Operator – 1st ShiftCNC Machine Operator – 1st ShiftLocationPlymouth, MN 55441Job... ...YearLocation: Plymouth, MNSchedule: 1st Shift Mon-Fri 7AM-3PMPosition Type: Direct HireRequirements... ...requirements.Change tooling, replace inserts, and monitor tool wear to maximize...Day shiftTemporary work$22 - $35 per hour
...Machinist II About Niron Niron Magnetics is commercializing the first new permanent magnetic material in decades—a breakthrough... ...II, you will be responsible for programming, setting up, and operating both CNC and manual machining equipment, with a focus on vertical...Hourly payPermanent employmentWork at officeImmediate start$20 - $23 per hour
1st Shift Hand Bindery Finisher - Direct Hire$20-23/hr DOEKey ResponsibilitiesInspect printed and bound products for quality defects.Perform... ..., kitting, labeling, and packaging.Complete hand bindery operations for custom and small-batch projects.Stitch, glue, and assemble...Day shiftPermanent employment$36 per hour
...skill/competency). ~4-day work schedule (Monday – Thursday), 1st and 2nd shift openings. ~ We don’t just provide jobs, we provide careers... ...Expectations and Qualifications: Expertise in set-up, operation, and troubleshooting to consistently achieve production rates...Day shiftTraineeshipRelocationRelocation packageAfternoon shift$22 per hour
...Pay Rate: $22.00/hr • Location: Plymouth, MN • Schedule: 1st Shift, Mon-Thurs/Fri, 8-hour shifts starting at 5AM, 6AM, or 7AM, or... ...parts or products involving close tolerances. Must set up and operate all machine shop machines to cut-bend, machine, or form parts....Day shiftTemporary workShift work$30.24 - $40.5 per hour
...Division in Minneapolis, Minnesota. The CNC Machinist II is responsible for setting up, adjusting, and operating numerically controlled machine tools. This role... ...$2,000 Sign on Bonus eligible for this role. Shift/Hours: Mon-Friday 6:00 a.m.-2:30 p.m. Compensation...Permanent employmentContract workWork visaRelocation packageShift work- Philips in Plymouth, MN is seeking a Machine Operator I to support new product introduction projects. You will set up and operate equipment... ...integrity in a regulated environment. The role is first shift, Monday-Thursday 5am-3:30pm, onsite in Plymouth. Strong attention...Day shift
- ...Swiss Machinist Direct-hire 1st, 2nd and weekend shifts available. We are searching for a Swiss Machinist to support our manufacturing facility... ...shift. A Swiss Machinist is responsible for set ups and operation of Swiss Machines per work instructions and set up sheets....Day shiftWeekend workAfternoon shift
$20 per hour
...printed insurance materials at the end of the production line. If you are detail-oriented, have strong counting skills, and want steady 1st shift hours between October 19th and October 31st, apply today! Location: Minneapolis, MN Wage: $20.00/hr. Hours: 7:00 am – 3:00 pm,...Day shiftTemporary workMonday to FridayWeekend work$22.57 - $26.96 per hour
...Starts Strong! Now Hiring: Production Machine Operators Location: High-profile Union Plant –... ...reports; check quality at the start of the shift and ensure quality of product throughout... ...check and drug screen8 Hour Schedules:1st Shift: 7:00am - 3:00pm2nd Shift: 3:00pm -...Day shiftHourly payFull timeTemporary workImmediate startMonday to FridayShift work$20.25 - $23.25 per hour
...Job Description Job Description Now Hiring: Machine Operators – All Shifts Available! North Minneapolis Pay: $20.25–$23.25 per hour... ...manufacturing experience, while others do not. Available Shifts ~1st Shift: 6:00 AM – 2:00 PM ~2nd Shift: 2:00 PM – 10:00 PM...Day shiftHourly payFull timeImmediate startAll shiftsShift workNight shiftAfternoon shift- Philips is seeking a New Product Introduction Pilot Operator for its Plymouth, MN facility on first shift. You will operate development equipment to assemble and process development products and support the NPI teams in defining procedures and process parameters. You will...Day shift
$38 - $40 per hour
...Location: Bloomington, MN | Payrate : $38 - $40/hour | Both 1st and 2nd shifts available PDS Tech Commercial is partnering with a... ...Machinist , you'll independently set up, adjust, troubleshoot, and operate multi-axis CNC Swiss machines to manufacture tight-tolerance...Day shiftHourly payLocal areaShift workAfternoon shift- ...We are seeking a highly skilled and detail-oriented Machine Operator to join our manufacturing team. The successful candidate will... ...through expert machine operation and quality control. Train on 1st shift and go to 2nd shift Duties Support all safety programs...Day shiftContract workAfternoon shift
- ...Job Details IQ Resource Group is looking for Production Operators and Material Handler in Arden Hills, Minnesota! Schedule: 1st Shift: 6am-2pm Monday-Friday 2nd Shift: 2pm-10pm Monday-Friday 3rd Shift: 10pm-6am Sunday-Thursday This...Day shiftMonday to FridayNight shiftAfternoon shift
- ...Machinist is responsible for fabrication and layout on a variety of parts or products involving close tolerances. Must set up and operate all machine shop machines to cut, bend, machine or form parts. ESSENTIAL FUNCTIONS •Responsible for quality of work performed...Day shift
$60k - $90k
...Park, MN, to hire a skilled CNC Swiss Machinist II. In this role, you will be responsible for setting up and operating Citizen Swiss machinery to produce high-precision... ...and adhere to company quality manuals. Shift & Schedule Shift: Weekend Days & Weekend Nights...Day shiftHourly payPermanent employmentTemporary workWork experience placementImmediate startShift workNight shiftWeekend work$20 - $26 per hour
New Product Introduction Operator Job Description New Product Introduction Pilot Operator - 1st shift position. In this role you This role will be supporting new production introduction projects at our Plymouth, MN facility. Your role: Operate development equipment...Day shiftHourly payFull timeWork at officeWork visaRelocation package3 days per week- ...world.Working as one to help many.Position SummaryThe Production Operator is responsible for performing a variety of manual, semi-... ...service, genetic information or other segmenting factor protected by law, or local human rights commission activity.1st Shift & 2nd Shift...Day shiftTemporary workLocal areaFlexible hoursAfternoon shift
$28 - $40 per hour
...Job Description Job Description This job is posted on behalf of Talent Guide USA by Top Echelon. 1st Shift Folder Gluer Operator / Lead Operator $28–$40+ per hour | Overtime | Excellent Benefits | Paid Training | Relocation Assistance A growing folding carton...Day shiftHourly payRelocation package$75k - $85k
Swiss Machinist Direct-Hire 1st, 2nd and weekend shifts available We are searching for a Swiss Machinist to support our manufacturing facility... ...shift. A Swiss Machinist is responsible for set ups and operation of Swiss Machines per work instructions and set up sheets....Day shiftPermanent employmentTemporary workWork experience placementImmediate startShift workWeekend workAfternoon shift$39.36 per hour
...controlled facility in Coon Rapids, MN! Twin City Staffing is hiring a turning machinist for 1st or 2nd shift direct-hire opportunities. In this role, you will set up and operate CNC turning equipment, interpret GD&T blueprints, inspect precision parts, and maintain...Day shiftWeekly payTemporary workMonday to FridayShift workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Inserter Operator II - 1st Shift. Be the first to apply!
- automation operator Minneapolis, MN
- coating operator Minneapolis, MN
- cell operator Minneapolis, MN
- material handling operator Minneapolis, MN
- pool operator Minneapolis, MN
- terminal operator Minneapolis, MN
- systems operator Minneapolis, MN
- data center operator Minneapolis, MN
- refinery operator Minneapolis, MN
- scale operator Minneapolis, MN


