Incinerate Operator
Royal Caribbean Group
The Incinerator Operator is responsible for operating and maintaining the incinerator room and pulper system, including garbage sorting and storage in the cold storage room. This role monitors equipment performance, performs routine cleaning and logging, and follows environmental, safety, and quality standards. Work is conducted under the supervision of the Incinerator Technician with the ability to perform assigned work orders and respond to operational needs as required.; Key Responsibilities Carry out work orders and tasks issued by the Incinerator Technician.; Maintain and clean the incinerator room, pulper system, and associated equipment; monitor operation to ensure safe and proper functioning.; Sort and process garbage into designated streams (glass, metal tins, aluminum cans); store in the cold garbage storage room and prepare for recycling at designated ports.; Wash and sanitize areas including floors (with attention to corners), wash basins, stairs, garbage rooms, plastic containers, and bins; keep sensors and equipment clean.; Log pulper system maintenance, including daily water changes and flow verification for continuous systems; adjust flow as required.; Immediately report any equipment malfunctions or safety concerns to the Incinerator Technician or watchkeeping engineer.; Ensure all safety and PPE requirements are followed during daily operations.; Perform additional tasks as assigned by supervision to support vessel waste management operations.; Qualifications & Training Basic safety training (BST) completed prior to employment.; Prior experience in incinerator operation, waste management, or a related maintenance role.; Ability to read and interpret written procedures; basic mathematical and record-keeping skills.; Good communication and teamwork skills; ability to follow instructions and work independently when required.; Willingness to work in a hot, noisy, and sometimes strenuous environment; physical ability to lift up to 50 pounds.; Language Requirements Ability to read, write, and communicate in English to understand procedures and communicate with supervisors and crew.; Additional languages are advantageous but not required.; Physical & Environmental Requirements Physical: Regularly stand, walk, and perform manual tasks; capable of lifting up to 50 pounds; able to work in confined or hot spaces typical of incineration areas.; Vision: Adequate vision to read gauges, charts, and written procedures; ability to adjust focus as needed.; Environmental: Work in an industrial shipboard environment with exposure to heat, foul odors, dust, and fumes; use of PPE required; may require shift work, overtime, and on-call duties; must be able to operate safely around moving machinery and hot surfaces. Full use of arms, legs, vision, hearing, and communication abilities is required to perform duties effectively.; Additional Notes: Candidates must be committed to safety and environmental standards.; Work involves physical activity and exposure to challenging environments.; Place of work: onboard a cruise ship.
Vacancy posted 9 days ago
Similar jobs that could be interesting for youBased on the Incinerate Operator in Abroad vacancy
- ...build, repair and maintain complex dies, jigs and fixtures used in producing vehicles and EV components. You’ll interpret blueprints, operate manual and CNC equipment, and ensure tools meet tight quality and safety standards. Working in GM’s inclusive, safety-first culture...Suggested
$11.33 - $15.18 per hour
Company Description Pay Rates Starting between: $11.33 - $15.18 / hour Are you passionate about team building, customer service, and meeting new people? Pilot Company offers a dynamic environment where no two days are the same. Team members have the opportunity to...SuggestedWeekly payFull timeLocal areaFlexible hoursNight shiftWeekend workDay shift- ...is seeking a skilled Machinist/Toolmaker to support precision manufacturing for advanced vehicles. In this role, you’ll set up and operate manual and CNC machines, interpret blueprints and CAD data, and build or repair tools, jigs and fixtures used in production. You’ll...Suggested
- ...process collaboration, to bring our customers high quality, cost effective solutions, delivered on time. SUMMARY: Sets up and operates various CNC machines to perform operations on lathes, mills, drills, grinders, turning, shapers, broach and hobs. ESSENTIAL DUTIES...SuggestedHourly payTemporary workWork at officeImmediate startShift workWeekend workDay shift
$20 per hour
Artistree-Mississauga The Production Operator utilizes a variety of equipment and machines to produce high quality custom framing products for our customers while following safety rules, meeting productivity standards and achieving attendance requirements. Major...SuggestedHourly payFull timePart timeLocal areaImmediate start- ...Position Summary: The Machinist is responsible setting up, programming, and operating CNC machines to perform various tasks such as drilling, milling, and turning. This role requires a combination of technical skills, precision, and problem-solving abilities to ensure...Work experience placement
- ...United States with Middlesex Paving earning an equally solid regional presence and reputation. Position Summary: The Equipment Operator is responsible for the safe and efficient operation of assigned equipment, ensuring compliance with company safety policies and...Full timePart time
- ...IKO Industries Ltd. is a market leader in the manufacturing of roofing and building materials. IKO is a Canadian owned and operated business with production facilities worldwide and has many years of unparalleled success in the roofing materials industry. Quality, integrity...WorldwideShift workWeekend work
$19.26 per hour
...Machine Operator JOB-10047212 Anticipated Start Date August 10, 2026 Location Provo, UT Type of Employment Contract Hire Employer Info Our client is a global leader in energy technology, providing cutting-edge solutions across the...Hourly payFull timeContract workShift work$19 per hour
...Machine Operator JOB-10047078 Anticipated Start Date July 20, 2026 Location Rancho Cucamonga, CA Type of Employment Contract Hire Employer Info Our client is a global leader in energy technology, providing cutting-edge solutions...Hourly payFull timeContract workSummer workShift workAfternoon shift$24 - $25 per hour
...Job Title: Machine Operator Location: Ontario, CAN Employment: Contract to Hire Industry: Manufacturing Compensation: $24 - $25/Hour Schedule: 40 hours /week About the Opportunity: The Machine Operators primary function is to setup and operate fabrication...Contract workTemporary workWorldwide$17 per hour
...Machine Operator JOB-10047231 Anticipated Start Date August 10, 2026 Location Katy, TX Type of Employment Contract to Hire Employer Info Our client is a global leader in energy technology, providing cutting-edge solutions across...Hourly payFull timeContract workMonday to FridayShift work$19 per hour
...safety signs, and other asset labeling. Job Summary The Production Associate performs daily production activities for the operations of the Taylor, TX production facility and preventive maintenance on equipment as needed. The Production Associate also helps...Full timeContract workFor contractorsWork at officeLocal areaShift work$15 - $19 per hour
Production Associate JOB-10046995 Anticipated Start Date July 13, 2026 Location Rice, MN Job Summary If you are looking for a Production Associate role, this is the perfect o Our client is an industry leader and one of the largest food ...Full timeAfternoon shift- ...industrial and aerospace & defense. Job Summary Our client is seeking a CNC Machinist to produce high-quality products by operating and maintaining machining equipment in a manufacturing environment. This role involves setting up and troubleshooting machines, performing...Full timeContract workLocal area
- ...Machine Operator (Bend – CNC Press Brake) Role Responsibilities Set-up and operate CNC machine to produce precision parts Verify conformance of finished work piece to specification using precision instruments (Vernier, Micrometer) Responsible for operational...Work experience placement
$21 per hour
...We have a current opening for a Machine Operator - 2nd Shift, and are actively reviewing applications. The Machine operator is responsible for the effective and efficient operation of their assigned lines. Machine operators must ensure procedures are followed, and...Hourly payPermanent employmentAfternoon shift$12.2 - $16.53 per hour
Company Description Pay Rates Starting between: $12.20 - $16.53 / hour Are you passionate about team building, customer service, and meeting new people? Pilot Company offers a dynamic environment where no two days are the same. Team members have the opportunity to...Weekly payFull timeLocal areaFlexible hoursNight shiftWeekend workDay shift- ...heavy construction industries and possess a strong understanding of excavation, utility installation, remediation systems, and field operations. This position requires a hands-on leader who can effectively manage personnel, equipment, subcontractors, and project...Full timeFor subcontractorNight shift
- ...Pipeline Your Impact Own your opportunity to support our nation's defense. Make an impact by connecting and securing critical operations across the globe, keeping our country safe and secure. Job Description Meaningful work and personal impact: As a...
- Sei appassionato di produzione? Ti piace far parte di un team di successo? Entra a far parte del nostro team di produzione La nostra divisione Industrial & Energy Technology (IET) fornisce prodotti e servizi che ottimizzano la produzione e il trattamento dell'energia...
$23 - $26 per hour
...Brake Press Operator Shift: Morning Monday–Friday, 6:45 AM – 3:15 PM Pay: $23-26/hr based on previous experience Full Benefits starting from day 1 Location - Stratford Primary Responsibilities: Set up tooling Using the appropriate gauge of metal...Monday to FridayShift workDay shift$16.5 - $23 per hour
...Cementing Bulk Plant Operator JOB-10047193 Anticipated Start Date August 10, 2026 Location Midland, TX Type of Employment Contract Hire Employer Info Our client is a global leader in energy technology, providing cutting-edge solutions...Full timeContract workTraineeship- Company : Sime Darby Auto Engineering Sdn. Bhd. To assemble the vehicles in the production line based on Production Manual
- Company : Inokom Corporation Sdn. Bhd. To assemble the vehicles in the production line based on Production Manual About us : Inokom is involved in the assembly and manufacturing of light commercial vehicles as well as contract assembly. Its manufacturing facility...Contract work
- ...engagement across major international athletic networks. Built on a culture of being brave, working as one team, and continuously driving operational change, Genius Sports balances cutting-edge software suites with a distributed data infrastructure to capture sports history as...Contract workPart timeFor contractorsRemote workWork from homeWorldwideFlexible hoursShift workNight shiftWeekend work
- ...Talent is an esteemed talent acquisition consultancy specializing in the industrial sector. We are currently seeking a highly skilled Operator Plant to join our dedicated team. As an Operator Plant at Eram Talent, you will be responsible for ensuring the efficient and safe...
$20 - $23 per hour
...Inventory Control Operator JOB-10047081 Anticipated Start Date July 27 , 2026 Location Odessa, TX Type of Employment Contract Hire Employer Info Our client is a global leader in energy technology, providing cutting-edge solutions...Hourly payFull timeContract workWork at officeShift workNight shift- ...intelligence, you will provide real world feedback and play a vital role in the constantly developing driving field. As a Vehicle Safety Operator you will be responsible for running on road experiments and reporting back to our research and development teams. Key...Full timeContract workFixed term contractSecond jobWork at officeFlexible hoursShift workRotating shiftWeekend work
$22 per hour
...Job Title: AT Operator Location: Burlington, ON Industry: Semiconductor Compensation: $22/hr. Schedule: Day and Afternoon Shift Your day to day as an Operator will consist of the following: Performing specific back-end semiconductor manufacturing functions...Temporary workWorldwideShift workRotating shiftDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Incinerate Operator. Be the first to apply!






