Welder
Department of the Navy - Agency Wide
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Welder in Paulsboro, NJ vacancy
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...SuggestedShift work
- ...Job Description Job Description RSC is looking for multiple pipe welders who can pass a 6G Stainless TIG test. Pay starts at 40/hr and has opportunities for advancement into lead roles. We are able to test ASAP and get a start date lined up ASAP. Please submit...SuggestedImmediate start
$30 per hour
Founded and family?owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300...SuggestedShift workWeekend workDay shiftAfternoon shift- ...Welder / Fitter At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families...
$18 - $24 per hour
...Job Title: Aluminum/Steel Welder Location: Chester,PA Salary/Rate: $18-24 Responsibilities: - Read and interpret blueprints, drawings, and specifications to determine the appropriate welding techniques and materials - Perform welding and fitting tasks using...Hourly payFull timeContract work$23.74 per hour
...Welder Hiring Event – Same-Day Interviews & Hiring Decisions Are you a skilled welder looking for a great career with competitive pay, outstanding benefits, and opportunities for growth? Wastequip wants to meet you! Join us for our upcoming hiring event and discover...Hourly payTemporary workImmediate startFlexible hours$30 - $43 per hour
...Location: Camden, NJ; Advanced Manufacturing Division Job Description : Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for...Hourly payNight shiftWeekend work- ..., fast-paced, and growing team. integrity and efficiency. The Pipe Fitter is responsible for preparing and fitting pipe spools for welders and installs complex piping systems, for machinery, equipment and systems according to verbal, written instruction, piping and instrumentation...Flexible hoursNight shiftAfternoon shift
- ...Job Description Job Description Now Hiring, Welders, Fitters, Fabricators, Installers. Metal Fabrication Shop Specializing in Metal Staircases, Railings, Structural Steel, On site Welding (repairs and installations). We are Hiring all positions for shop...Immediate start
- Industrial Mechanic Full-Time Schedule: Monday - Friday, 7:00 AM - 5:00 PM Overtime Available | Additional Weekend Hours Possible Benefits ~ Health Insurance ~ Dental Insurance ~ Vision Insurance ~ Disability Insurance ~401(k) + Company Match...Hourly payFull timeMonday to FridayWeekend work
$28 per hour
...Job Description Job Description Structural Steel Welder/Fabricator Pay: $28+/hr. (depending on experience) Shift: Days, Flexible on start time Description: ~ We are seeking a skilled Welder / Fabricator to join our AISC-certified structural steel fabrication...Flexible hoursShift work$20.66 per hour
Job Description: Wastequip has an immediate opportunity for a Fabricator to support our Erial, NJ manufacturing operation. This is a full-time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much...Hourly payFull timeTemporary workImmediate startMonday to FridayFlexible hoursShift work- Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for a full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers...Weekly payFull time
- Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. ...Permanent employmentFull timeTemporary workPart timeInterim roleCasual workWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
$21 per hour
Production Operator Job Location: Paulsboro, NJ, United States Employment Type: Regular Category: Production / Operations Posting Date: Jul 2, 2026 Join our Team! Schedule: 2nd Shift(3:00pm – 11:30am Monday - Friday, with overtime as needed) Why Apply...Hourly payLocal areaRelocation packageMonday to FridayShift workNight shiftAfternoon shift- Job: Quality Technician Duration: 6 Months Job Description: Looking for M-F 10am- 6:30pm and 12pm - 8:30pm , with flexibility to work weekend days once trained. Experience is entry level. Principal accountabilities • Prepares and accurately determines metal...Immediate startWeekend work
$24.05 - $36.05 per hour
Fleet Technician II Great company. Great people. Great opportunities. If you'd like the chance to make your mark with the world's largest equipment rental provider, come build your future with United Rentals! With minimal direct supervision, the Fleet Technician...Hourly payWork at officeLocal area$44.79 per hour
Job ID 33868 Maintenance Mechanic Regular West Deptford - NJ, United States of America ( Deptford - NJ,United States of America) Important EEO information related to openings in the US Syensqo is an equal opportunity employer. We evaluate qualified applicants...Hourly payLocal area- Maintenance Technician At CBRE Global Workplace Solutions (GWS), Safety is our top priority! We maintain a safety-first culture in which CBRE employees return home in the same condition in which they reported to work. We're looking for skilled and forward-thinking Maintenance...Hourly payWork at officeVisa sponsorship
- IMPORTANT NOTICE: FUTURE MAINTENANCE TECHNICIAN OPPORTUNITY This requisition has been created in anticipation of future business growth and staffing needs. Applications will be reviewed when an active business need is confirmed. If your background aligns with...Hourly payWork at officeVisa sponsorship
- ...fabrication and installation. Verify dimensions and ensure proper alignment and fit-up of piping components. Work closely with welders, project managers, and field personnel to complete projects safely and efficiently. Maintain compliance with company safety...
- Job Description: Insight Global is seeking a Maintenance Mechanic for a leading specialty chemical manufacturing client. This individual will support critical plant operations by maintaining and troubleshooting a variety of mechanical systems, including pumps, blowers...
- Job Description Job Description Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices ! We're looking for a full-time Automotive Alignment Technicians to join Team ...Weekly payFull timeImmediate start
$52.51k
At Bozzuto, every team member shares a deep commitment to doing good for those around us . We live this each day by designing, building, managing and maintaining one-of-a-kind residences. Whether its the talent within our communities or the expertise across our property...Weekend workAfternoon shift$20 - $30 per hour
...Job Description Job Description Welder/Fabricator Shifts: ~1st ~2nd ~3rd Pay: ~$20-30/hr. Description: ~ Cannonball Recruiting is seeking skilled Welder/Fabricators . The ideal candidate will be responsible for fabricating, assembling, and...Weekly payShift work$20 - $25 per hour
...Job Title: MIG Welder Job Overview ~ Perform MIG welding and steel fabrication for containers ~ Work in a high-volume production environment ~1st Shift: Monday – Friday, 6:00 AM – 2:30 PM ~ Use GMAW processes on an automated conveyor system Key...Weekly payContract workTemporary workMonday to FridayDay shift- ...Job Description Job Description Description: Schmidt Industrial Services LLC is looking for an ASME Code Fitter/Welder to join our team in Chester, PA. The role will be responsible for supporting the fabrication of heavy gauge code storage tanks and vessels that...
$22 per hour
Job Description Job Description Gas and Electric Fireplace Installer We are seeking a motivated, highly personable and enthusiastic Prefabricated Fireplace Installer to join our team at The Fireplace People in West Berlin, NJ. This is an exciting opportunity...Hourly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!


