Automation System Designer (Electrical Engineering)
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
- Ensure all Hanwha Philly Shipyard’s safety procedures, rules and regulations are performed and met
- Perform basic and detail design activities for assigned systems, including calculations, diagrams, drawings, design change notices, and equipment selection relevant to assigned systems
- Assigned Systems, including but not limited to Alarm and Monitoring, Fire Detection and Alarms, and Alarm Signaling Systems
- Participate in basic and detail design activities within the Electrical Design Department, including review of design documents from other shipyard engineers, vendors, and external design partners
- Coordinate and assist the fabrication, assembly, installation, and/or testing of assigned systems, and equipment
- Prepare technical specifications, collect vendor information and maintain maker’s list for assigned systems
- Generate and access Bills of Material and provide technical support for material tracking, logistics, handling, and timing of installation
- Propose technical improvements; develop and implement quality standards applicable to assigned systems
- Interface with Owner and Class to resolve technical issues
- Develop testing procedures for assigned systems
- Provide field engineering support as required to support production activities during Class and owner inspections or responding to production questions arising during vessel construction
- Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to assigned systems
- Perform other related duties as required and assigned
- Able to communicate effectively with all levels of the organization, both verbal and written
- Decision making/problem solving
- Organizational understanding
- Willingness and ability to work as a team member
- Conflict resolution
- Strategic thinking
- Stress management
- Teamwork
- Bachelor's Degree in Automation and Electronic Systems is preferred; however, candidates with a technical diploma and 10+ years’ experience in ship design and/or construction may also be considered
- Minimum 10 years’ experience in shipbuilding, Automation and Electronic Systems Specialization, or manufacturing
- Experience with Automation System or Control system design and construction
- Proficiency with MS Office and CAD systems such as AutoCAD
- Knowledge/experience concerning basic and detail ship design
- Knowledge/experience concerning modern shipbuilding practices
- Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as international experience or familiarity with European and/or Asian Shipbuilding Standards
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Automation System Designer (Electrical Engineering) in Mullica Hill, NJ vacancy
- ...Perform basic and detail design activities for assigned systems, including calculations,... ...activities within the Electrical Design Department, including... ...from other shipyard engineers, vendors, and external design... ...Bachelor's Degree in Automation and Electronic Systems...SuggestedFull time
$21k - $24k
...Faculty - Henry M. Rowan College of Engineering Position Overview Non‑tenure‑... ...for the newly launched B.S. in Electrical Engineering Technology (EET)... ...instrumentation & measurement, embedded systems & IoT, PCB design, control systems, automation, industrial networks, and...SuggestedFull time- Full-Time Open Rank Teaching Professor Position Electrical & Computer Engineering / Electrical Engineering Technology - Henry M... ..., instrumentation & measurement, embedded systems & IoT, PCB design, control systems, automation, industrial networks and communications, and...SuggestedFull timeSummer workVisa sponsorshipWork visa
- ...Technical Services Inc. is seeking a Senior Electrical Engineer in Swedesboro, NJ. The ideal candidate will have 15-20 years of engineering design experience in oil and gas projects and... ...schedule. Proficiency in electrical systems and relevant codes is essential. Strong...Suggested
- Senior‑level Electrical Engineer with experience planning, organizing, and developing engineering... ...participate in the full project cycle, from the design phase through the final construction... .... Knowledge up to 35 kV distribution systems is a plus. Understanding of power...SuggestedWork at office
- ...Electrical Engineer (Philadelphia, PA) Position Summary: The Electrical Engineer will provide... ...; feasibility studies; preliminary design activities; contract design activities;... ...studies related to ships/boats/craft, ship systems and/or shipboard equipment....Contract workFor contractorsWork at officeImmediate startFlexible hours
- ...Job Description Job Title: Electrical/Electronic Engineer II/III Location- Philadelphia, PA... ...Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier... ...support critical ship system processes, design, and development for naval and...For contractorsFor subcontractor
$72k - $98k
...Job Description Job Description Electrical Engineer / Designer – Supermarket & Lighting Specialist Job Title: Electrical Engineer / Designer... ...-build firm leading the Mid-Atlantic region in turn-key systems integration for the supermarket and food retail...Full timeFor contractorsWork at officeLocal areaFlexible hours- Adjunct Faculty Positions in All Areas of Electrical and/or Computer Engineering Adjunct Faculty Positions in All... ...Core topics Digital and embedded systems Computer architecture Circuits, electronics, power electronics VLSI design, chip design, advanced chip manufacturing...Part timeVisa sponsorship
$20 - $25 per hour
...dynamic showroom environment? Classic Rock Fabrication is seeking a Design Center & Receiving Associate to support both our warehouse... ...documentation (e.g., packing slips) for accurate entry into the computer system. Complete daily receiving entries in the computer system....Hourly payFull timeWork at officeShift work- ...Job Description Job Description NDI Engineering Company is seeking an Electrical Engineer to support the design of US Navy test facilities. This position will be based... ...candidate will have experience in electrical systems design, development, and testing, specifically...For contractorsWork at office
- PBF Energy is seeking an Instrument/Analyzer Engineer to support maintenance, reliability, and capital projects focusing on instrumentation and safety systems. You will act as the Subject Matter Expert while coordinating closely with Operations, Maintenance, and Technical...
$97k - $147k
Electrical Engineer JOB SUMMARY The Electrical Engineer, as part of the Equipment & Reliability Engineering... ..., is responsible for specification, design, and maintenance of electrical... ...installations, UPS and substation battery systems). Principal Responsibilities Provide technical...Work experience placement$73.9k - $84.98k
Instructional Designer (PSS2), Rowan Online Job no: 501508 Work type: Regular Full-Time Location: Glassboro, New Jersey Categories: Professional... ..., and enhance online courses using the Learning Management System and integrated technologies. Apply instructional design...Full timeWork at officeLocal areaRemote workWork visaMonday to FridayFlexible hours- Micro1 is seeking a LibreSprite Expert to apply expertise in training next-generation AI systems. Your contributions will influence how AI models learn and perform through high-quality inputs. No AI experience needed; domain knowledge is paramount. You will manage pixel...Remote job
- Classic Rock Fabrication in Mantua Township is seeking a Design Center & Receiving Associate. This full-time role involves receiving and verifying materials, maintaining inventory cleanliness, and supporting warehouse operations. The ideal candidate should have a high...Full time
$94k - $116k
...Lead Electrical Engineer (Converting) Job Description You’re not the person who will settle... ...Engineers at Kimberly-Clark initiate, design, develop, optimize and problem solve manufacturing... ...Experience with manufacturing control systems, such as: PLCs (Programmable Logic...Full timeTemporary workWork at officeLocal areaRelocationFlexible hours- Job Description Job Title: Engineer (Mechanical/Electrical/Computer) Location: Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider... .... Develop and present fully automated advanced fluid system models using...For contractorsFor subcontractor
- Overview As a Sr. Electronics Engineer at Nielsen-Kellerman Co. ("NK"), you are a multi-skilled... ..., to collaborating with product designers and software engineers to drive full-stack... ...“internet of things” solutions, the Sr. Electrical Engineer will be a critical member of cross...Casual workWork at officeRemote workWork from homeHome officeMonday to FridayFlexible hours
$19 - $20 per hour
...ScheduleCompetitive hourly pay $19.00 - $20.00Part-time, flexible scheduleMonday-Friday hours preferred, some flexibility availableJob SummaryKonrad Beverage Company is seeking a highly creative and energetic Part-Time Graphic Designer with 3+ years of experience in prod......Hourly payPart timeFlexible hours- A leading home improvement retailer in New Jersey is seeking Kitchen Designers to assist customers in creating their dream kitchens. The role involves engaging with customers, providing expert advice, and guiding them through the design process. The ideal candidates should...
- ...in Franklinville, New Jersey. The role involves recruiting and organizing students to provide a quality marching band experience, designing shows for competitions, and actively participating in local events such as football games and parades. The ideal candidate will have...Local area
$120k - $130k
...Description Job Description Job Title: Electrical Engineer Location: On-Site – Monroe Township... ...of Maritime Domain Awareness Systems across platforms. Our PowerBuoy® platforms... ...with the Technology & Innovation team to design and implement innovative electrical solutions...Work at officeLocal areaRemote work- ...Job Description Job Description NDI Engineering Company is seeking an Electrical Engineer to join our team supporting the design of US Navy test facilities, as well as other... ...Ship Hull, Mechanical and Electrical (HM&E) systems or power plant systems; have experience...For contractorsFor subcontractorWork at office
- ...People like you! Job Description Electrical Engineer Glass Fiber Operations WHAT’S... ...actions and leads by example. Designing electrical systems, including power distribution,... ...standards. Developing and implement automation solutions, such as programmable...Worldwide
- Rowan University is seeking an Instructional Designer for its Online division to create engaging online learning experiences. You will collaborate with faculty to enhance course quality while working primarily on-site in Glassboro, NJ, with flexible remote options. The...Remote workFlexible hours
- A family-owned contractor company in Westville, NJ is looking for an experienced commercial electric specialist with at least 10 years in the field. The role involves reviewing plans, scheduling jobs, ordering materials, and ensuring timely job completion. Candidates must...For contractors
- ...Job description: Duties and Responsibilities: Manage electrical projects using estimate, plans, and project management methods.... ...field. ~ Prior on-site field work experience preferred. We are a Design/Build company and attention to electrical installations and code...Full timeFor contractorsWork experience placementFor subcontractorWork at officeLocal areaRemote workMonday to FridayFlexible hours
$101.7k - $167.68k
Instrument/Analyzer Engineer Job Summary Primary responsibilities are... ..., safety instrumented systems (SIS), programmable logic controllers... ...will have Process, Controls, Electrical, Mechanical acumen to lead... ...disciplines to improve or correct designs, installations, and increase...For contractorsWork experience placement$97k - $147k
PBF Energy is seeking an Electrical Engineer to join their Equipment & Reliability Engineering Department at their Paulsboro facility. This role entails the specification, design, and maintenance of electrical equipment crucial for plant operations while ensuring reliability...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Automation System Designer (Electrical Engineering). Be the first to apply!


