Quality Control Inspector
RIDE Mobility
Quality Control Inspector
Lancaster, CA
The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time.
SUMMARY
The Quality Inspector's basic functions revolve around the overall goal of preventing and/or correcting any quality problems as early in the production process as possible and to minimize the quantity of parts leaving our facility that do not meet our quality standards. Quality Inspector conducts quality checks, paperwork evaluation, and studies necessary to successfully carry out his/her duties. The Quality Inspector is to make recommendations for improvements to departments or processes that will result in eliminating the root cause of any quality issues.
JOB DESCRIPTION
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Inspection during the manufacturing process, monitoring the production quality and ensure that each bus is built properly according to specifications.
- Responsible for examining materials for quality and identifying defects. Ensures that people, equipment, and materials are used properly to maximize productivity.
- Check parts, assemblies, and manufacturing processes on Bus against the specifications on the drawing to ensure they meet designated specifications.
- Documenting all problems/errors found in drawings, bills of materials, jigs, equipment, processes, etc. and reporting these to the appropriate department for correction.
- Maintaining this documented list and following up on open items until they are fixed and can be closed.
- Ensure quality of manufactured product.
- Examine materials from suppliers before sending them to production line.
- Inspect components, subassemblies, assemblies, and completed Bus.
- Test, measure, and analyze products.
- Record pass/fail grade of products.
- Produce detailed inspection reports.
COMPETENCIES
- Incoming Material Check
- Mechanical Inspection
- Discrepancy Reporting
- Air Leak Testing
- Dyno Water Test
- Brake Stop Tests
- Torqueing
- Road Test
- Welding Inspection
- Identify Air Valves
- Read Schematics
- Dimension Requirements Inspection
- Air/Brake System Audit
- Propulsion System Performance
- Water Test
- Perform Audits of Calibrated equipment
- Technical Capacity
- Organizational Skills
- Problem Solving/Analytical
- Customer/Client Focus.
WORK ENVIRONMENT
This job operates in an office and manufacturing environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. The noise level in the work environment and job sites can be loud.
PHYSICAL REQUIREMENTS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
This is largely a sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bending or standing on a stool as necessary.
SUPERVISORY RESPONSIBILITY
This position manages all employees of the quality department and is responsible for the performance management and hiring of the employees within that department.
TRAVEL
As required to fulfill duties.
REQUIRED EDUCATION AND EXPERIENCE
College degree preferred or Minimum of 5 years of experience in manufacturing with supervisory experience. 3-5 years statistics, Experience of Quality Systems (preferably ISO 9001) and Six Sigma or other analysis experience preferred Advanced level computer skills.
ADDITIONAL ELEGIBILITY QUALIFICATIONS
None required for this position.
RIDE is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, national origin, ancestry, sex, gender, gender identity, pregnancy, childbirth or related medical condition, religious creed, physical disability, mental disability, age, medical condition, marital status, veteran status, sexual orientation, genetic information or any other characteristic protected by federal, state or local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment.
$19 - $20 per hour
...Quality Inspectors A highly recognized Aerospace & Defense company in Palmdae, CA is hiring Quality Inspectors. Pay: $19-$20/hr, depending on experience Shift: 1st Shift, 6:00 AM to 4:30 PM, Monday to Friday plus overtime Employment Type: Contract-to-Hire...SuggestedContract workTemporary workMonday to FridayShift workDay shift$19 - $20 per hour
...A highly recognized Aerospace & Defense company in Palmdae, CA is hiring Quality Inspectors . Pay: $19-$20/hr, depending on experience Shift: 1st Shift, 6:00 AM4:30 PM, MondayFriday plus overtime Employment Type: Contract-to-Hire 90 days Overtime:...SuggestedWeekly payContract workTemporary workShift workDay shift$47.48k - $64.41k
...for an accommodation or an alternative application process. Quality Inspector Full Time Palmdale, CA, US 18 days ago Requisition ID: 1078 Salary... ...of First Article Inspection procedures and quality control standards. Ability to read and interpret engineering drawings...SuggestedFull time$23.45 - $31.3 per hour
...High Desert Medical Group is looking for a full time Quality Management Coordinator who will administer all supportive functions with regards to all QM policies and procedures. They will seek to identify opportunities to improve data integrity, processes, member services...SuggestedFull timeWork at officeRelocation package$50 per hour
...by integrating Environmental, Safety & Health (ESH) principles, Quality Management System (QMS) requirements, and ground‑operations... ...metrics, audit results etc. Knowledge of Statistical Quality/Process Control.Ability to operate in a dynamic and challenging, team-oriented...SuggestedFull timeTemporary workWork experience placementInterim roleCasual workFlexible hoursShift work- ...effectively communicate or escalate results. Effectively use Quality Assurance systems and equipment to access, print, and utilize... ...technical experience and knowledge base to understand Quality Control Plans and NCR’s. Can take initiative to drive development in...Full timeLocal areaShift work
- ...Transportation Security Inspector – Aviation Opportunities in Lancaster Transportation Security Inspectors help ensure that airports... ..., or procedures Evaluating security programs, operational controls, or corrective-action plans Identifying security vulnerabilities...Full timeWork at officeLocal areaFlexible hoursNight shift
$45 - $55 per hour
...Code Enforcement Inspector Location: Lancaster, CA Schedule: 5/40 Assignment Type: Contract | On site Payrate: $45.00 - $55.00 DOE We are seeking an experienced Property Rehabilitation Code Enforcement Building Inspector to support Building and Safety...Contract workFor contractors$50 per hour
...DescriptionManages the implementation and execution of program quality requirements. Responsible for all aspects of Quality across the... ...as the primary liaison between Material Test Services/Process Control, NDI/NDE, and the Calibration team and key stakeholders including...Full timeContract workTemporary workWork experience placementFor subcontractorCasual workFlexible hours$50 per hour
...temporary second/third shift work as needed. Travel for this position would be minimal.Applies quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or research and...Permanent employmentFull timeTemporary workWork experience placementInterim roleCasual workWork at officeFlexible hoursShift workAfternoon shift- Job Description Job Description Must possess a minimum of 5 years of planning manufacturing work instruction experience OR equivalent experience in manufacturing / engineering documentation development and have demonstrated ability to create comprehensive work instructions...
$39 - $55 per hour
Use your HVAC/R experience to keep refrigeration, heating, and cooling equipment working across commercial properties. Steady service assignments combine planned upkeep with calls for equipment problems. Practical troubleshooting skill and dependable follow-through matter...Hourly payFull time- ...condenser; maintains, repairs, and replaces fills elements, water distributor, filter screening, piping, electrical components and control operation. (E)Maintains hot water boiler operation including electronic and mechanical safeties, primary and secondary pump systems...Hourly payPermanent employmentFull timeTemporary workFor contractorsApprenticeshipSummer workLocal area
$39 - $55 per hour
HVAC/R Technician PositionThis is a Full-Time, W-2 HVAC position with Rinvio in Lancaster, CA, paying $39–$55 / hr.Rinvio is hiring an experienced HVAC/R Technician for commercial refrigeration and HVAC service work in the Antelope Valley market. You will troubleshoot,...Full time$100k - $200k
...with Dependable ComfortAt Arctic Air, we've built a legacy of trust and excellence in residential HVAC services. Our commitment to quality and customer satisfaction is matched only by our dedication to our team. When you join Arctic Air you're not just starting a job—you...Work experience placement- ..., CA We are seeking an experienced and detail-oriented Quality Control Manager to oversee quality control activities and ensure that... ...(CQE), Certified Quality Auditor (CQA), or Certified Quality Inspector (CQI). Lean, Six Sigma, or continuous improvement...Work at office
- ..., lead their industry, and provide high quality products. Your journey with us is more than... ...We are seeking an experienced Final Inspector to join our Quality team. In this role,... ...Precision Group abides by applicable export control laws including the International Traffic...Hourly payPermanent employmentTemporary workWork at office
- ...space propulsion systems. This role includes algorithm development, uncertainty quantification, data analysis, sensor fusion, remote control of test articles, and other advanced concepts as applied to chemical and electric propulsion thrusters. Duties will range from...Hourly payFull timeContract workLocal areaRemote workShift work
$32.01 - $54.49 per hour
...California, you will find yourself working on some of the most exciting programs within the company. You will work with a team of NDT Inspectors, certified in all NDI disciplines. Your specialized expertise will aid us in continuing the Skunk tradition in forging ahead. On...Full timeTemporary workTraineeshipWork experience placementWork at officeFlexible hours$95.9k - $178.1k
...reducing variation and discrepancies in the build.Collaborate with quality engineering and production operations to triage repeat failure... .... Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions...Full timeTemporary workWork experience placementCasual workFlexible hours$79.3k - $147.3k
...software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data... ...excellence. Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions...Full timeTemporary workWork experience placementCasual workFlexible hours$95.9k - $178.1k
...software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data... ...excellence. Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions...Full timeTemporary workWork experience placementCasual workFlexible hours$118k - $219.1k
...disciplines including industrial engineering, planning, scheduling, Quality Assurance &/or production operations.-Experience supporting... ...experience with engineering releases and configuration change control.-Pay InformationFull-Time Salary Range: $118000.00 - $219100.00...Full timeTemporary workWork experience placementCasual workFlexible hours$50 per hour
...software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data... ...excellence. Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions...Full timeTemporary workWork experience placementInterim roleCasual workFlexible hours$79.3k - $147.3k
...equipment and software such as laser based scanners, optical metrology, dimensional analysis software, as well as process familiarity in quality and calibration methods, coating and finish applications using sheet material, applique's, and maskants.Additional responsibilities...Full timeTemporary workWork experience placementCasual workFlexible hours$43k - $53k
...components within a high-precision environment. This position is responsible for executing production processes that meet stringent quality and safety standards, contributing directly to the reliability and performance of aerospace products. The technician will engage in...Full timeFlexible hours$120 per hour
Job Description Job Description 4 openings: 12 Months or longer: Active Clearance: $120 Manager also open to seeing level 3 candidates -- 6 to 9 years of experience - Required Skills: Teamcenter and/or SAP relevant to Bill of Material and/or Shop Floor Management...- ...aerospace products. This position provides exposure to cross-functional teams and opportunities to influence manufacturing efficiency, quality, and affordability. Key Responsibilities Collaborate with engineering teams to ensure designs are optimized for...Full timePart timeDay shift
$50 per hour
Requisition ID: 14009ERP Eligible?: YesERP amount: $50 LMRecognitionRelocation: YesType: RepresentedShift: 1Clearance Prior to Start: SecretFinal Clearance: Secret with Investigation or CV date within 5 yearsPay Transparency: $29.30 - $54.87Experience Level: Hourly/Non-...Hourly payFull timeTemporary workWork experience placementCasual workFlexible hours- Job Description Job Description Responsibilities: Provide guidance to Engineering regarding design concepts to ensure the best manufacturing technique is being used to meet the Engineering design Participate in tool design reviews to ensure tools are feasible...Full timePart timeShift workDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Control Inspector. Be the first to apply!
- supplier quality Lancaster, CA
- rn quality Lancaster, CA
- quality Lancaster, CA
- quality manufacturing Lancaster, CA
- quality inspection Lancaster, CA
- quality equipment Lancaster, CA
- quality improvement rn Lancaster, CA
- quality lead Lancaster, CA
- water quality scientist Lancaster, CA
- quality improvement nurse Lancaster, CA




