Aerospace NDT Inspector - Level 2 - Swing Shift

Located in Kent Washington , Protective Coatings Inc. is a leading provider of full service finishing for the aerospace, electronics and medical industries in both commercial and defense applications. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies, phenolics, polyurethanes, polyesters, elastomerics, intumescents, lacquers, alkyds, acrylics, dry-film lubricants and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else. Position Summary Candidates for NDT Inspector Level 2 will possess the skills and knowledge to perform all the duties of a trainee and can also independently inspect parts, make evaluations, perform required process tests and document results. Selected candidates as a Level 2 Inspector will be expected to perform evaluations on parts produced using fluorescent penetrant inspection (FPI) techniques or fluorescent magnetic particle inspection (MAG) to determine and detect defects that may compromise the integrity or quality of the part. The Level 2 may direct the work of a Trainee and assist them in moving through the established Level 2 qualification and certification process. Candidates must be self-disciplined and self-motivated individuals with strong accountability (attention to details) skills. Candidates must have the ability and desire to be flexible and adaptable in a fast-paced production environment, be resourceful and innovative along with presenting a strong business ethic and compliance to leadership and company policies, and a good communicator with the ability to represent the company in a positive manner. A Level 2 candidate will be expected to perform a variety of tasks which include but are not limited to: non-inspection functions in preparation for inspections, performing specific calibrations, tests and evaluations on production aerospace parts, develop procedures and establish techniques (i.e. technique cards) for Level 3 approval, and other tasks and training assigned by the Level 3 Inspector for further opportunity in advancing a career in NDT Inspection. Primary Duties & Responsibilities Examines parts under fluorescent or black lighting to detect surface defects under the direction of a Level 3 NDT Inspector using one of two methods: FPI (Fluorescent Penetrant Inspection) or MAG (Magnetic Particle Inspection). Reviewing and assimilating work instructions relating to cleaning, etching, dwell/develop operations, inspection criteria, and record results. Provide detailed information concerning processing techniques, findings, evaluation of indications, and part condition/disposition recommendations. Set up and calibrate equipment, conduct tests using equipment and interpret, evaluate, and document inspection results. Perform receiving inspections (before processing) as needed and immediately report any damage or discrepancy. Cleaning and etching of production parts in preparation for inspections. Application and removal of Fluorescent Penetrant Dye, dwell and develop processing in preparation for black light and white light inspections. Perform other assigned non-inspection functions such as racking, masking or cleaning of production parts, and provide training of such duties to Trainees and Level 1-limited Operators. Assist with (and perform as required) in internal and external system audits, and CAPA (Corrective Action/Preventative Action) implementation. Will require use of personal protective equipment (PPE) during certain tasks (goggles, safety glasses, aprons, boots, gloves, hearing protection, etc) and be expected to comply with safety directives and policy. Will be exposed to chemicals/solvents and occasional fumes, wet/humid conditions, low-level lighting, and moderate noise level. Will, at times require heavy lifting or use of mechanical hoist for the aid in lifting objects. Work closely with inspectors and area leadership to complete work and prioritize tasks. Clean, organize and maintain work area as prescribed by supervision. Required Skills Ability to independently perform all the duties of an NDT Helper (entry level position) and Level 1-Limited Operator. Specific vision abilities required by this job include close vision, color vision and peripheral vision. The ability to successfully pass a Jaeger eye exam with corrected or uncorrected vision. Familiarity of codes, standards, and specification such as NAS 410, BSS 7698 and BAERD GEN-012. Blueprint reading and interpretation skills pertaining to aerospace production detail parts and sub-assemblies. Basic mathematic skills: add, subtract, multiply and divide using whole numbers, common fractions and decimals. Ability to stand for prolonged periods with limited movement. Good communication skills. Ability to work alone or as a member of a team, good cooperative skills. Ability to read, write and communicate in English. Specifically, applicants must be able to read and understand written or verbal instructions. Ability to lift and carry up to 35 lbs. Demonstrated ability to work effectively in a fast paced and changing environment with multiple priorities. Must be fluorescent penetrant & magnetic particle inspection certified. Required Experience Experience relative to (1) year minimum specific to non-inspection functions of the NDT department as an NDT Helper in the entry level position. Formal and Practical training is required for FPI and MAG Inspection (or both). Minimum (400) hours FPI practical experience and/or (530) hours MAG Inspection practical experience necessary, and 32 hours formal training in either FPI or MAG inspection. Level Of Education General Standard education including the ability to read and write in English. Level 2 NDT (Non-Destructive Testing) Certification from the previous employer for each NDT method practiced, is required. Note: Prior training and experience of acquired Level 2 Inspection status must be verified and documented in writing by the previous employer or training agency. Any claimed training and experience which cannot be verified and documented shall be considered invalid, and applicant must require additional training as recommended by the Responsible Level 3. All previous training must be verified by the Responsible Level 3. Selected candidates shall be subjected to examinations administered by the Responsible Level 3 at the time of hire to verify the physical and technical qualifications of the NDT candidate. Exams will consist of a vision test, a general exam, a specification exam, and a practical examination. Shift Monday through Friday from 2pm to 10:30pm. Must be able to train on day shift for up to 30 days. #J-18808-Ljbffr Precision Castparts