Composite Technician
$25 - $28 per hourAerotek
Composite Technician
Job Description
Looking for day Composite Technician I in the finishing department working the day shift from 5am to 1:30pm. Pay will be based on experience but typically between $25-$28 an hour to get started (can be higher with experience) and over time available.
In this role, you will perform a variety of composite finishing, surface preparation, bonding, adhesive application, and curing operations, focusing primarily on preparing and finishing composite parts to meet engineering, quality, and customer requirements.
Responsibilities
Interpret and follow work instructions, engineering drawings, process specifications, and customer requirements.
Record work performed, material lot numbers, and operation sign-offs in the shop traveler and ERP system.
Escalate discrepancies, material damage, and conditions not addressed by the work instruction before proceeding.
Perform composite part finishing, preparation, bonding, and assembly operations in accordance with engineering drawings, work instructions, and customer specifications.
Perform sanding, grit-blasting, grinding, trimming, and surface preparation of composite parts to achieve required dimensions, tolerances, and surface conditions.
Prepare composite and metallic surfaces for bonding by performing cleaning, sanding, abrading, and etching procedures to process specifications.
Verify surface condition and cleanliness meet the bonding specification before adhesive application.
Apply paste adhesives according to specified mix ratios, application procedures, bond-line requirements, and cure schedules.
Apply film adhesives to metallic parts, composite parts, and bonding surfaces while maintaining proper handling, orientation, and placement requirements.
Track adhesive out-time, shelf life, and freezer storage requirements against specification limits.
Perform bonding and assembly operations, including positioning, alignment, fit-up verification, and bondline control.
Prepare parts for oven curing, load and unload composite parts from curing ovens, and verify that the correct cure cycle, temperature, and time requirements are followed.
Monitor and document oven cure cycles and process information as required.
Perform post-cure operations, including deburring, sanding, trimming, cleaning, and final surface preparation.
Apply fillers, sealants, and other approved materials as required to achieve the specified surface finish.
Perform cosmetic and structural rework and repairs in accordance with approved procedures.
Perform all work to the released, current-revision work instruction and process specification.
Perform special process operations, including surface preparation, adhesive bonding, and oven cure.
Obtain and maintain the individual process certifications required to perform special process operations.
Perform in-process and final visual inspection, identifying surface defects, contamination, voids, and inadequate adhesive fillet or squeeze-out.
Identify nonconformances and support Material Review Board disposition.
Follow all applicable AS9100, quality, safety, and environmental requirements.
Properly handle, store, and dispose of composite materials, adhesives, solvents, chemicals, and other production materials.
Wear required personal protective equipment, including respiratory, eye, hearing, and hand protection.
Maintain foreign object debris (FOD) control and cleanliness standards at all work stations and in controlled bonding areas.
Maintain a clean, safe, and organized work area consistent with company and industry safety standards.
Essential Skills
Ability to read and interpret engineering drawings, specifications, work instructions, and process documentation.
Experience working with carbon fiber, fiberglass, epoxy systems, film adhesives, paste adhesives, and metallic parts.
Experience with surface preparation, chemical etching, bonding, and oven curing.
Experience using hand tools, power tools, measuring equipment, and composite manufacturing equipment.
High attention to detail for bond quality and surface condition.
Ability to produce high-quality structural and cosmetic finishes.
Hand dexterity and coordination for sanding, finishing, and adhesive application.
Ability to keep track of various parts and assemblies through sequential process steps.
Ability to maintain a clean workspace and comply with FOD control requirements.
Safety-minded approach to working around ovens, grit-blast and sanding equipment, solvents, chemicals, and forklifts.
Written comprehension to read, comprehend, and follow written work instructions, job orders, and process specifications in English.
Ability to work independently and as part of a production team.
Computer literacy for recording and managing tasks.
Job Type & Location
This is a Permanent position based out of Huntington Beach, CA.
Pay and Benefits
The pay range for this position is $52000.00 - $58240.00/yr.
Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.
Will be supporting the Northrop Grumman B-2 Program (Flight Controls, Rudders, and Elevons):, lots of growth potential
Job Type & Location
This is a Permanent position based out of Huntington Beach, CA.
Application Deadline
This position is anticipated to close on Nov 28, 2026.
Workplace Type
This is a fully onsite position in Huntington Beach,CA.
About Aerotek
Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.
Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.
Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.
- ...The Composite Technician – Finishing performs a variety of composite finishing, surface preparation, bonding, adhesive application, and curing operations to support aerospace, defense, and commercial manufacturing. This position focuses primarily on preparing and finishing...SuggestedPermanent employment
$35 - $50 per hour
...team members. What You’ll Do: Work on Archer’s most challenging composite structures; provide manufacturing input to help solve... ...in the aerospace and/or automotive industry as an engineering technician. Solid understanding of mechanical and structural assembly techniques...SuggestedLocal areaWorldwideVisa sponsorshipShift work$30 - $35 per hour
...Composites Technician Huntington Beach, California, United States About Mach Industries Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission...SuggestedPermanent employmentWork experience placementWork at officeLocal areaWeekend work$26 - $43 per hour
...tackle challenges head-on. What You'll Do: Manufacture composite tooling from plugs, masters, and patterns Perform wet layup... ...person you want to work with! Have 3+ years experience as a technician in composites manufacturing, and have an understanding of industry...SuggestedHourly payFull timeTemporary workLocal areaWeekend work$22 - $38 per hour
...Layup Parts Manufacturing Technician At Layup Parts, we're developing the technology that will build the future. We're a manufacturing... .... Have 3+ years experience as a technician in prepreg composites manufacturing, and have an understanding of industry best practices...SuggestedPart timeWeekend work$26 - $40 per hour
...Layup Parts Manufacturing Technician At Layup Parts, we're developing the technology that will build the future. We're a manufacturing... .... Have 3+ years experience as a technician in prepreg composites manufacturing, and have an understanding of industry best practices...Hourly payFull timeTemporary workPart timeLocal areaShift workNight shiftWeekend work$34 - $40 per hour
...Layup Parts Manufacturing Technician At Layup Parts, we're developing the technology that will build the future. We're a manufacturing... ...with! Have 10+ years experience as a technician in prepreg composites manufacturing, and have an understanding of industry best...Hourly payPermanent employmentFull timeTemporary workPart timeLocal areaShift workWeekend workAfternoon shift- ...You’ll Do: Operate cutting equipment : Set up, program, and run Eastman cutting machines to cut prepreg, dry fabric, and other composite materials according to production requirements. Material preparation: Pull, thaw, and stage prepreg rolls; handle and organize...Permanent employmentFull timeTemporary workLocal areaDay shiftAfternoon shift
$30 - $40 per hour
...rapid innovation, and a chance to help define the future of autonomous defense, we’d love to have you on the team. Position: Composite Technician Location: Irvine, CA Work Arrangement: On-site Position Description DZYNE Technologies is seeking a Composite Technician for...Hourly payFull timeWork experience placementWork at officeLocal areaImmediate startRemote workVisa sponsorshipWork visaShift work$35 - $40 per hour
...Position Type: Full Time, Education Level: High School, Salary Range: $35.00 - $40.00 Hourly, Job Shift: Day POSITION SUMMARY Composite Technician IV is a hands‑on role, whose primary responsibility is performing a wide variety of composite plying, layup, fabrication,...Hourly payFull timeShift workAfternoon shift- ...Job Description Job Description POSITION SUMMARY Composite Technician I is a hands-on role, whose primary responsibility is to build composite structures that meet company design specifications. This is an entry level position where on-the-job training can be provided...Afternoon shift
- At Layup Parts, we're developing the technology that will build the future. We're a manufacturing technology company replacing months of lead time with days, using proprietary software, automation, and advanced manufacturing systems built for speed. Our customers are...Internship
- ...aerospace, defense, robotics, and beyond. To keep up with them, manufacturing has to change. That's what we're building. The Composites Technician (De-Tooling) is responsible for safely and efficiently removing cured composite parts from molds, tools, and fixtures while...
$27.2 - $40.8 per hour
...include occasional overtime as needed to meet operational goals. About the Role: Responsible for drilling precision holes in composite and metallic components, including use of the appropriate drill motors and drill sizes, using appropriate tooling/jigs or egg cups...Monday to FridayDay shift- ...urgency, with a strong attention to detail and a resolve to deliver the highest quality. Have 3+ years experience as a technician in prepreg composites manufacturing, and have an understanding of industry best practices for things like intensifiers/caul plates, adhesive...Permanent employmentFull timeTemporary workPart timeLocal areaShift workNight shiftWeekend work
- At Layup Parts, we're developing the technology that will build the future. We're a manufacturing technology company replacing months of lead time with days, using proprietary software, automation, and advanced manufacturing systems built for speed. Our customers are...Day shiftAfternoon shift
- ...Urbineer is composed of experienced, hands-on multidisciplinary technicians and engineers with a strong background in driving complex... ...environment. Introduction Urbineer is looking for a Composite Prototype Technician to be part of our group and will play a vital...
- ...for. If that sounds like you, this is the opportunity you’ve been waiting for. About the Role We are looking for a Composite Technician to support the fabrication, assembly, integration, and testing of composite and metallic structures across our aircraft platforms...Full time
- Job Description Job Description Description: California Faucets is looking to bring on a 1st Shift Finisher . This role is based on-site in our Huntington Beach, CA facility. The hours for this position will be Monday through Friday, full-time from 5:15 a.m.- 2:0...Full timeMonday to FridayShift workDay shift
$26 - $32 per hour
...Availability Range Monday-Saturday & Weekends: 6:00 am - 6:00 pm SUMMARY The Pool Pros is seeking an experienced Service Repair Technician to diagnose, troubleshoot, repair, and install residential and commercial pool and spa equipment. The ideal candidate is...Hourly payFull timePart timeWork at officeLocal areaWeekend work$32 - $38 per hour
...Job Description Job Description Experienced RV Service Technician – Airstream Orange County Airstream Orange County is expanding and building a new showroom and service center. We are looking for an experienced RV Technician to join the OC Team. Airstream is an...- ...Job Description Job Description Job Title: Service Technician Department : Service Supervisor: Service Manager Summary Description Repair, customize, maintain, or overhaul both customer and dealer owned motorcycles as close to the allotted time schedule...Work experience placementFlexible hoursAfternoon shift
- Job Description Job Description Most people don't think much about their vehicle until something goes wrong. That's where we come in. Whether you're helping customers, servicing vehicles, leading a team, or supporting operations behind the scenes, you'll play...Temporary workFlexible hoursWeekend work
- ...Job Description Job Description PEP BOYS - General Service Technicians ($800 New Hire Bonus) Competitive Weekly Pay + Weekly Incentive Compensation | Full-Time | Paid Training | Career Growth Opportunities Pep Boys is now part of the Mavis Tire family -- and...Weekly payFull timeImmediate start
$75k - $85k
...Job Description ChargeTronix · Field-based (Southern California home base) · Full-time · Heavy travel. A senior DC fast-charger technician who is the escalation point for the hardest faults, commissions new sites, mentors Tier I/II techs, and owns uptime in the territory...Daily paidFull timeFor contractorsTraineeshipWork at officeLocal areaRemote workWork from homeMonday to Friday- ...Job Description Job Description Field Service Technician – Packaging & Automated Equipment Costa Mesa, CA | 70–85% Travel Are you the person people call when a machine isn't running the way it should? Harpak-ULMA is looking for an experienced Field Service...Remote work
$22 per hour
Job Description Job Description Company Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe...Home officeDay shift$25 - $30 per hour
Proven To Perform From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently looking for a Heat Treat Operator within our manufacturing...Hourly payWeekend workDay shift- ...we are. Our team is made up of amazing people who are outdoor enthusiasts that embrace and drive change. Junior Assembly Technician, an entry level role, has responsibility for picking and preparing parts for assembly production with accuracy, assembling...Work at office
- ## Assembler IIApply: Huntington Beach, CA: Full time: Posted Yesterday: R-101484**WORK SHIFT:**Second Shift (United States of America)**JOB DESCRIPTION:**Assembler II will perform job duties listed for Assembler I but has additional training / duties listed in Essential...Full timeWork experience placementImmediate startWork visaFlexible hoursShift workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Composite Technician. Be the first to apply!



