Building Engineer
$33.51 - $39.42 per hourCushman & Wakefield
Job Title
Building Engineer Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties. Job Description • Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours IMPORTANT EDUCATION:
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE:
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS:
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations
• Thorough knowledge in all building systems operations, maintenance and repair
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties WORK ENVIRONMENT:
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment
• Involves movement between departments, floors, and properties to facilitate work Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $33.51 - $39.42 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io. Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"
Building Engineer Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties. Job Description • Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours IMPORTANT EDUCATION:
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE:
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS:
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations
• Thorough knowledge in all building systems operations, maintenance and repair
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties WORK ENVIRONMENT:
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment
• Involves movement between departments, floors, and properties to facilitate work Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $33.51 - $39.42 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io. Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"
Vacancy posted 5 hours ago
Similar jobs that could be interesting for youBased on the Building Engineer in Broken Arrow, OK vacancy
$28 - $31.5 per hour
...Building Engineer 630944 Job no: 494649 Work type: Staff Full-time Location: Tulsa Categories: Service/Facilities/Maintenance, Skilled Craft & Trades Campus OSU-Tulsa Contact Name & Email Jamie Childers, ****@*****.***...SuggestedHourly payFull timeLocal areaShift work- ...STRUCTURAL ENGINEER LOCATION | Tulsa REPORTS TO | Director of Structural Engineering TEAM | Structural Engineering FLSA... ...YOU READY FOR THIS? Are you someone who is passionate about building relationships and helping your team succeed? Do you get excited...SuggestedInternshipWork at officeLocal areaFlexible hours
$89.21k - $133.81k
..., with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it.ResponsibilitiesWork... ...software to create process plans and NC programs for turbine engine and gas compressor components.Create routing and BOM’s in MRP...SuggestedFull timePart timeCurrently hiringWork at officeRemote workRelocationFlexible hours$63k - $68k
...mission critical facilities and installations, and in support of readiness and contingency operations. Who You Are: The Building Engineer supports the day-to-day operation, maintenance, and repair of a USPS facility and its surrounding grounds. This position...SuggestedFull timeLocal area- ...Job Description Job Description Full Benefits - Medical, Dental, Vision, 401K Base salary up to 150K The Product Design Engineer will be responsible for designing, developing, and improving industrial valve products used in Oil & Gas production environments....Suggested
- ...Job Description Job Description System One is working with a local client to find a Design Engineer II Design Engineer II Responsibilities Analyze products and tooling to develop and maintain design standards and specifications that meet customer requirements...Local area
$25 - $35 per hour
...Job Description Job Description Project Engineer (Project Coordinator) Tulsa, OK / Project-Site Based Location: Tulsa / project-site-based Job Type: Full-Time Pay: $25.00–$35.00 per hour, with overtime as needed Expected Hours: 40–60 per week A Note...Hourly payFull timeWork experience placementMonday to Friday$120k
...Job Description Job Description Job Title: Lead Product Engineer Industry: Manufacturing / HVAC / Industrial Fabrication Location (city, state): Broken Arrow, OK Assignment Type: Direct Hire Pay: Up to $120,000 base salary + target bonus opportunity...Full timeImmediate startFlexible hours- ...Overview The Manufacturing Technician supports manufacturing engineering and production operations through equipment troubleshooting, machine... ...to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of...Flexible hoursShift workWeekend work
- ...The Lead Building Engineer serves as a hands-on technical lead responsible for supporting the maintenance, operation, and reliability of agency facilities. This position oversees HVAC systems, building automation systems, preventive maintenance, and general building repairs...For contractorsApprenticeshipWork at officeRelocation
- Company DescriptionWe are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always... ...people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our...Full timeFlexible hours
$116.26k - $151.13k
...before the posting end date.Job Summary The Civil/Structural Engineer will support gas, coal, renewable, and new-generation power projects... ..., grading, drainage, foundations, structural steel, buildings, equipment supports, roads, utilities, and other plant infrastructure...Full timeFor contractorsWork at office- Company DescriptionWe are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always... ...people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our...Full timeFlexible hours
$20 - $60 per hour
...What You’ll Do Collaborate with a multidisciplinary team of engineers and scientists to design, develop, and implement technology solutions... ..., Curious, and Collaborative. Our Working Model As we build our company, we have always believed an in-person culture is...Permanent employmentFull timeSummer workInternshipWork at office- Company DescriptionWe are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always... ...people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our...Full timeFor contractorsInternshipLocal areaFlexible hours
- SUMMARYThe Civil Engineer position will include responsibility for the technical completion of civil engineering projects and work activities such as municipal market, residential design, site work development and other civil design projects as needed. The Civil Engineer...Contract workWork at officeLocal areaNight shift
- ...throughout our company and within our communities, we constantly ask ourselves: What is our impact on the world?We believe building engineering is more than systems and structures, it’s about powering progress and enabling innovation. As part of HDR’s Building Engineering...Contract work
- ...Job Description Job Description Job Title: Applications Engineering Lead/Mgr Type: Direct Hire Work Model: Onsite System One is partnering with a local client looking for an Applications Engineering lead/manager We are seeking an experienced Applications...For subcontractorLocal area
- Department: EngineeringSupervisor: Director of EngineeringSalary Grade: Full-time, ExemptSummary:The Civil/Structural Engineer position is responsible for developing designs, managingprojects and leading project teams.Accountabilities: Uphold engineering core values: integrity...Full time
- Company DescriptionWe are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always... ...people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our...Full timeFlexible hours
- ...The Retail Architect position is specific to Cyntergys retail building programs, and would oversee and plan all architectural aspects... ...of concepts, prototype practices, procedures, and associated engineering discipline work. This role performs a variety of complex tasks...
- ...For: Experience: A minimum of two (2) years of project engineering experience Experience in a fast-paced environment Industry... ...Strong negotiation skills Business acumen and relationship building skills Technology: Candidate should have experience with...Full timeTemporary workFor subcontractorWork at office
- Overview Are you a skilled Geotechnical Engineer looking for a new opportunity? Join our team and make a significant impact on groundbreaking projects. We're seeking a passionate professional to contribute their expertise and help shape the world beneath our feet.What...For contractors
$70k - $95k
...Job Description Job Description Overview: This is an amazing opportunity for an Assembly Process Engineer to enjoy a salary range of $70,000 to $95,000 yearly, 1st Shift required. Plus, radically affordable health insurance after 30 days. ***THIS POSITION IS...Weekly payDay shift- ...Job Description Job Description Summary: A licensed Professional Structural Engineer (PE) will lead the design, analysis, and validation of structural components for industrial heat exchange systems and related infrastructure. This role combines deep engineering expertise...Contract work
- ...Geotechnical Project Engineer Take Your Geotechnical Career to the Next Level Kleinfelder, a Forbes' Top Employer for Engineers in North America, is committed to a people-first culture, technical excellence, and creating opportunities where employees can thrive!...For subcontractor
- ...documentation, working within a multi-discipline office of architects and engineers. This role involves architectural production work, including... ...and correctly respond to project needs Capability to build and maintain relationships with team members Commitment to...Local area
- ...Professional Land Surveyor Join our well-established and growing Land Surveying and Engineering firm, where we're dedicated to exceeding client expectations and making a positive impact on our communities. We prioritize work-life balance, employee growth, and a family...Flexible hours
- ...Construction Management Intern Zeeco fosters a robust work environment where employees, from engineering teams to support groups, benefit from a strong culture, trained leadership, and opportunities for growth. Zeeco collaborates with the biggest names in the industry...Full timeSummer workInternship
$18 - $50 per hour
...program Position Overview: As a Thermo-Mechanical Product Engineering Intern , you will support the development and application of... ...as Altair Simlab) by evaluating existing workflows and helping build new workflows for thermo-mechanical analysis of engineering systems...Remote jobHourly payFull timeInternshipWork at officeLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Building Engineer. Be the first to apply!





