BAS Controls Systems Installer I-III
MPSW
Job Description
Job Description
For over 45 years, MPSW has been a trusted source for engineered HVAC solutions in Arizona. We represent top-tier manufacturers and provide technical sales support for nearly every system type—backed by expert design assistance, energy analysis, and application know-how.
At MPSW, we're team-driven, service-focused, and always moving forward. If you're a self-starter who values collaboration and wants your work to make a real impact, you'll fit right in here.
BAS Controls Systems Installer I-III
Reports to: Controls Area Construction Manager
FLSA Status: Non-Exempt
The Opportunity
The Controls Systems Installer Level I - must have basic construction site experience, be willing to work in unfinished buildings with basic hand tools and possesses a valid driver's license. Level II - requires all of Level I requirements as well as a starting base knowledge of controls, mechanical and electrical systems. Level III - possesses all of Level I and II requirements and has the skills and knowledge of how to install controllers, components, and systems with minor support. All Levels must have good communication skills, be self-motivated and eager to learn.
Responsibilities:
- Pulls and secures wire between controllers and devices
- Mounts control devices such as temperature sensors and actuators
- Mounts panels and panel components
- Terminates wire at controllers and control devices
- Performs simple conduit work such as straight conduit stub-ups through ceiling grid from a panel or conduit stubs through a wall
- Able to explain basic low-voltage wiring principles
- Uses a meter for simple troubleshooting and can understand simple wiring diagrams
- Works independently on assigned tasks and reports back to Supervisor or Peers on issues that prevented work from being completed
- Jobsite cleanup
- Completes documentation including timesheets and project notes
Level Descriptions
- Level I – Candidate requires supervision and support to perform tasks. Primarily helps with pulling wire, installing field devices, and maintaining a safe and clean work environment.
- Level II – Candidate requires some support with moderate level tasks such as mounting controllers and terminating wires on controllers and field devices. Can install control wiring and some field devices without consistent support.
- Level III – Candidate requires less support on basic installation tasks and possesses a basic knowledge of control systems. Can install and terminate controls on unitary equipment with little support and can troubleshoot installation on basic controls circuitry.
Qualifications:
- High School Diploma or equivalent
- 0-3 years of experience working in construction, controls, HVAC, or similar industry preferred
- Ability to understand and comply to jobsite and company safety requirements
- Demonstrates a positive attitude and a desire to learn
- Ability to take direction for specific tasks
- Demonstrates mechanical aptitude and basic hand tool skills
- Good verbal and written skills
- Must have a Valid driver's license, acceptable driving record and be 25 years of age for insurance purposes
- Basic computer skills required (Outlook, Word, Excel)
Other Skills/Abilities
Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks.
Environmental Requirements
Will be required to work in a field environment, multiple customer sites on a daily basis.
Physical Demands
While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.
MPSW is an Equal Opportunity Employer
Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship.
Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.
- ...manufacturers and provide technical sales support for nearly every system type—backed by expert design assistance, energy analysis,... ...work to make a real impact, you'll fit right in here. BAS Controls Systems Installer IV-V Reports to: Controls Area Construction Manager...SuggestedFor contractors
- ...CAREERS Controls Service Tech - Tucson Purpose of the Position As part of the Varitec Controls and Service Solutions LLC team, expectations... ..., and preventive maintenance on building automation control systems while providing top-tier customer service for all internal and...SuggestedFor subcontractorLocal areaNight shift
- ...electrical asset management, helping protect and optimize critical systems in complex environments. Powered by BCES Global, we deliver the... ...WHAT YOU BRING Current or previous NETA/NICET Level II, III, or IV certification (or equivalent experience with intent to certify...SuggestedLocal areaImmediate start
- ...position supports Department of State Worldwide Protective Services III (WPS III) Task Orders (TO) in austere environments.... ...Service Excellence (ASE)/factory certification for assigned equipment/systems. At a minimum must possess three (3) of the certifications listed...SuggestedWorldwideOverseasLong distance
- ...comprehensive fire protection services, including installation, inspection, maintenance and repair of... ..., and maintaining fire sprinkler systems to ensure compliance with regulatory... ...sprinkler heads, valves, piping, pumps, and control systems. Inspect piping, fittings, and...SuggestedFor contractorsImmediate start
$23 - $31 per hour
...SIGN ON BONUS AVAILABLE FOR QUALIFIED CANDIDATES About us Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions...Hourly payLocal areaRelocation package$18 - $18.5 per hour
...Management Company! Overview: AWP Safety is on the lookout for motivated individuals to embark on a rewarding career as a Traffic Control Flagger. This entry-level position is perfect for those who thrive in diverse environments and are seeking a dynamic career path...Hourly payDaily paidWork experience placementLong distanceShift workNight shift$21.2 - $67.08 per hour
...hydraulics, electrical, powertrain, engines, and Tier IV Emissions systems, failure analysis procedures, warranty claims procedures...... ...equipment and components. Prepare service reports. Plan and control cost of repair jobs. Maintain company equipment - keep in...Hourly payWork experience placementRemote workMonday to FridayShift workDay shift$23 - $31 per hour
...SIGN ON BONUS OR RELOCATION AVAILABLE FOR QUALIFIED CANDIDATES About us Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon...Hourly payLocal areaRelocationRelocation package- ...following repairs. Inspect and test systems to verify system compliance with plans and... ...-and-water solution. Adjust system controls to setting recommended by manufacturer to... ...diagrams, using electrician's hand tools. Install auxiliary components to heating-cooling...
- ...through difficult problems. This person installs, maintains & repairs fuel dispensers; submersible... ...fuel pumps; service station site controllers; credit card readers; cash register... ...electronics, computers, and the fuel dispensing systems, including electronic, plumbing and...Relocation package
- ...This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals... ...information. General Description The Engineering Technician III reports directly to the Engineering Department Manager and provides...
- ...integrated advanced detection and surveillance systems for federal, state, and local agencies.... ...required to travel to client locations, install new equipment, respond to service... ...assemblies, electrical wiring, sensors, and control components (similar to automotive, aviation...Permanent employmentLocal areaImmediate startWork from homeHome office
- ...maintain, operate, and repair some of the Navy's most sophisticated electronics and computing systems, including radar, communications, navigation, local area networks, weapons fire control, and Aegis combat systems. ETs and FCs form the backbone of a ship's Combat Systems...ApprenticeshipLocal areaRotating shift
- ...Pharmaceuticals and In-Vitro Diagnostics (IVD) tools, is seeking a "Quality Control Technician" for Tucson, AZ Contract : Long term with good... ...as needed. Specialized knowledge generally of particular area, system or equipment. Requires specific training and/or certification....Full timeContract work
- ...skilled level in the electronics trade. They install, troubleshoot, repair and maintain a... ...with fire alarm and central timekeeping systems. Experience with one or more systems... ...fire alarms, clock, and Energy Management Controls). Equivalent combination of...
$22.85 - $31.41 per hour
...may have a fleet of large-scale power-generators, pumps, HVAC systems and oil/gas related equipment. Education or experience that prepares... ...diversified product mix, as well as trained experts. Climate Control Services Industrial Services Tools & Equipment Oil & Gas...Full timeTemporary workRemote workFlexible hours- ...A leading systems solutions company in Tucson, Arizona, is looking for a skilled technician in fire sprinkler service and repair. The role requires a minimum of 4 years’ experience and includes diagnosing equipment issues, performing repairs, and ensuring safety guidelines...Hourly pay
$40k - $55k
Job Description Job Description Certified Pest Technician licensed thru the State of Az. Must be able to identify and treat. Job Type: Full-time Base + COMMISSIONS Salary: $40,000.00 to $55,000.00 /year COMPANY VEHICLE CELL PHONE ALLOWANCE 401 K ...Full time$23 - $30 per hour
...site. This role is responsible for the installation, maintenance, and repair of commercial and industrial HVAC systems, including refrigeration, controls, and building automation systems. Pay... ...and building automation systems (BAS) Knowledge of AHU systems, including...Hourly payWeekend work$17.5 per hour
...complete all assigned jobs on or before scheduled end dates.* Installing and building displays, end caps, and fixturing.* Complete necessary... ...track, record, and communicate activity via designated systems/ workflows.* Available for weekend assignments as needed.* Your...Hourly payMonday to FridayFlexible hoursShift workEarly shift- ...successful hands-on experience with diesel engines, hydraulics, diagnostics, and have some experience with the latest electronically controlled machines. You own your own basic tooling(some specialty tools provided) Ready to tackle physical demands (lifting,...
- ...Job Description Job Description Epoxy Installer — Tucson, AZ We are seeking a skilled, dependable Epoxy Installer to join our... ...Surface cleaning, grinding, and patching as needed Mix epoxy systems accurately and follow safety protocols Inspect finished work...
- ...work specified on the repair order with efficiency and following dealership standards Test-drive vehicles, and test components and systems using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine,...Immediate startFlexible hours
- ...Job Description Job Description Process Control Technician- 2nd Shift 2:00pm- 10:30pm Monday- Friday Job Summary: We... ...In this role, you will implement process quality practices and systems, validate processes, document findings, and train staff to ensure...Monday to FridayAfternoon shift
- ...Electronic Devices Repairer include: testing instruments, navigational controls, and simulators; reading technical diagrams and manuals;... ...Must be between the ages of 17 and 35 Electrical electronics installers repairers commercial and industrial equipment electric motor...Part timeNight shiftWeekend work
$16.5 - $22 per hour
...multiple locations. Duties and Responsibilities: Install, maintain, troubleshoot, and repair network and wireless... ...infrastructure, including access points Support and troubleshoot POS systems, Client NUC computers, and kitchen display systems...Hourly payMinimum wageLocal areaRemote workRelocation- ...repairs to OEM specifications. Clean driving record. Strong troubleshooting skills in hydraulics, low voltage electrical, and mechanical systems. Proficient with precision measuring instruments. Completion of an accredited apprenticeship or 1 year technical college program is...ApprenticeshipLive inFlexible hours
- ...and grading using GPS and surveying equipment such as Machine controls, Total Stations, and Drones. Essential Job Accountabilities... ...Monitor and ensure accuracy during earthwork, paving, and utility installation Maintain daily records of measurements and site activities...Contract workFor contractorsWork experience placementNight shiftDay shiftAfternoon shift
- ...and grading using GPS and surveying equipment such as Machine controls, Total Stations, and Drones. Essential Job Accountabilities... ...Monitor and ensure accuracy during earthwork, paving, and utility installation Maintain daily records of measurements and site activities...For contractorsWork experience placementNight shiftDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to BAS Controls Systems Installer I-III. Be the first to apply!




