Mechanical Engineer IV
KLJ
Pipeline EngineerCandidate will enhance technical skills performing introductory calculations and assisting in the preparation of pipeline design deliverables under the mentorship of senior engineers. The ideal candidate will be highly motivated, self-starter with the ability to work individually and in a team environment.Job Duties and Responsibilities:Lead engineer on DOT/PHMSA jurisdictional and non-regulated pipeline projects.Assist with client proposals, project schedules, and client communications.Ability to take on project engineer role and/or an interest in developing into project management role with experience.Interact extensively with regulatory agencies, project management, and designers to ensure exceptional, on-time deliverables.Interact with client, regulatory agencies, construction contractors, material vendors, and other stakeholders to develop cost-effective pipeline designs and low maintenance solutions.Develop engineering calculations, pipeline modeling, and simple and complex problem solvingSupport development of junior engineering staff through mentorship and guidance.Coordination with cross-discipline services related to the overall project lifecycle, including civil, mechanical, structural, environmental/cultural, survey, and electrical teams to ensure integrated design solutions.Perform additional responsibilities as required by business needs.Be able to work in a team environment, take direction from supervisor(s), adhere to work schedules, focus on details and provide exceptional customer service to our clients.Development of design related calculations and direction of designers from basis of design through IFC plan sets and records compilation/audits.Perform hydraulic calculations, line sizing, pipe material grade and wall thickness selection, and Maximum Allowable Operating Pressure (MAOP) calculations.Provide QA/QC to plats, alignment sheets, P&IDs, pipeline facility designs, facility response plans, etc.Must have well developed organizational skills, be proficient in oral and written communications and be able to work with minimal supervision.Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skillsEnsure designs align with industry codes, safety standards, and regulatory requirements.Qualifications:Bachelor's degree in Mechanical Engineering or Engineering Technology from ABET accredited school.5-10+ years of relevant experienceValid Drivers LicenseAbility to balance multiple, fast pace projects through communication and prioritization of tasks.Preferences:PE licenseExperience in the design and construction of natural gas pipelines and/or facilities, potentially including:Clear understanding of relevant industry standards including API 610, 650, 653, ASME B31.3, B31.4, and B31.8, NFPA 30, DOT Part 192, DOT Part 193 and DOT Part 195Familiarity with natural gas and liquids pipeline design and details for measurement & regulation stations, mainline valves, and pigging stations.Pipeline hydraulic modelingSimple and complex HDD bore calculations and designCold weather design experienceWorking experience and application knowledge of pipeline safety regulations associated with US-DOT/PHMSA or State commissionsWorking experience and application knowledge of United States DOT – 49 CFR Part 192, and 195, and applicable state pipeline safety regulations.Working experience with Management of Change processes.Working experience and knowledge of API – RP 1173 Pipeline Safety Management Systems, or other similar Industry management system process a plus.Working experience and application knowledge of various pipeline industry related standards such as API, ASME, NACE and NFPA.Physical Requirements:The physical demands described represent those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities.The employee is regularly required to:Sit, stand, walk, stoop, kneel, twist, crouch, and crawl.Use hands to handle, or feel objects, tools, or controls; and reach with hands and arms.Talk or hear and communicate clearly.The employee must:Be able to occasionally walk on uneven terrain up to two miles per day.Frequently lift and move up to 10 pounds and occasionally lift and move up to 25 pounds and infrequently up to 50 pounds.Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus.What else you need to knowThis job description is not meant to be all-inclusive or restrictive and other duties may be assigned. It is a description of the job as presently defined and is subject at any time to revision. This document is intended to describe the general nature and level of work being performed by individuals assigned to this classification. This is not to be construed as an exhaustive list of all responsibilities, duties, and skills required. Individuals may be required to perform duties outside of their normal responsibilities, as needed.At KLJ, we have a vested interest in the personal, financial, and professional goals of our employees. We offer a competitive full suite benefit package including health, dental, vision, and life insurance, performance bonus, 401k, employee stock ownership program and a flexible work environment that gives you options to support excelling both professionally and personally. The options available for the current year are described at applicants must be authorized to work in the US, without employer-sponsorship. KLJ does not sponsor individuals for employment-based visas and does not participate in any OPT training program.KLJ will not be partnering with third-party recruiters on this position. Please review our third-party recruiting policy at will be posted until filled.Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
- ...Mechanical Engineer (439) Requisition ID 439 - Posted - TS-EN Engineering Services - Carlsbad, NM, US - WIPP Site - Engineering ? Overview Be part of the nation's only repository for the disposal of nuclear waste known as Transuranic (TRU) waste. Salado...SuggestedTemporary workFor contractorsLocal areaVisa sponsorshipRelocation packageFlexible hours
- ...Service Technician I and Trainee. Diagnose engine/compressor failures accurately and... ...inspections with little to no supervision. Perform mechanical inspection using micrometers, pressure... ...Ariel Mechanical CAT 3500 ADEM III and IV CAT 3500ULB and J Waukesha VHP *Applicants...SuggestedFull timeTraineeshipWork at officeWorldwideVisa sponsorshipNight shift
- ...Mechanic As a Mechanic, your mission is to ensure our rental equipment operates safely, efficiently, and reliably. You will independently... ...you will continue to build your technical knowledge of pumps, engines, and rental equipment systems. Inspection, Maintenance &...SuggestedLocal areaMonday to Friday
- ...To: Maintenance SupervisorLocation: New Mexico – Various(Relocation assistance provided to qualified candidates)OVERVIEWA Diesel Mechanic repairs and maintains various heavy equipment. The mechanic will insure proper operation of the equipment, including following-up...SuggestedImmediate startRelocation packageShift work
- ...come build your future with United Rentals! As a Field Diesel Mechanic (Service Tech III - Field Service), you'll use your skills to... ...of tools ~ Strong mechanical background knowledge of various engines ~ Must own tools applicable to position ~ Superior customer...SuggestedHourly pay
- ...: MPLX NG&NGL Operations West Region is seeking an Operations Engineer. The Operations Engineer will provide engineering support, project... ..., etc.• Leads site level initiatives to address operational, mechanical integrity, or PSM issues.• Identifies best practices at site...Full timeLocal area
- ...Senior Environmental Scientist or Engineer (329) Requisition ID 329 - Posted - ES-EV Permitting & RCRA Comp - Carlsbad, NM, US - SWB - Compliance ? Overview Be part of the nation's only repository for the disposal of nuclear waste known as Transuranic (TRU...Temporary workFor contractorsWork at officeLocal areaRelocation packageFlexible hours
$1,599 per week
Technician / Technologist Location: Carlsbad, NM Agency: Medical Solutions Pay: $1,599 per week Shift Information: Nights Start Date: ASAP About the Position A facility in Carlsbad, NM is seeking its next amazing Registered Polysomnographic...Full timeImmediate startShift workNight shift- ...ESSENTIAL DUTIES/RESPONSIBILITIES Works closely with Electrical Engineering staff to develop hardware, firmware, documentation, and... ...Comprehension of electrical, electronics (analog, digital) and electro-mechanical components. Compile and analyze operational, test and...
$70.97k - $123.57k
...Electrical Engineer (441) Requisition ID 441 - Posted - TS-EN Electrical Systems - Carlsbad, NM, US - WIPP Site - Engineering Overview Be part of the nation’s only repository for the disposal of nuclear waste known as Transuranic (TRU) waste. Salado...Temporary workFor contractorsLocal areaVisa sponsorshipRelocation packageFlexible hours- ...Electrical Engineer (Power Distribution)UDR Consulting is seeking qualified candidates for Electrical Engineer (Power Distribution) opportunities for our customer in Carlsbad, NM to support the Waste Isolation Pilot Plant (WIPP). Work Location: On-Site at WIPP Per diem...Daily paidPermanent employment
- ...Heavy Equipment MechanicA Heavy Equipment Mechanic repairs and maintains various heavy equipment used by the Dirt Crew team. The mechanic will insure proper operation of the equipment, including following-up with the equipment operators to guarantee found work is being...Immediate startShift work
- Midstream Operational Technology Systems Support This position is part of a team that supports and maintains the Operational Technology systems located at our processing plants and field locations. This position will have a level of responsibility for all Midstream ...Local area
$11.5 - $15 per hour
Automotive Tire TechnicianAt Big O Tires, we strive to be the preferred tire and auto service retailer in every community while making Big O Tires a great place to work. We offer affordable benefits, profit sharing bonuses, paid time off, a family oriented work environment...Hourly payWeekend work$11.5 - $15 per hour
Automotive Tire Technician At Big O Tires, we strive to be the preferred tire and auto service retailer in every community while making Big O Tires a great place to work. We offer affordable benefits, profit sharing bonuses, paid time off, a family oriented work environment...Hourly payShift workWeekend work$89.23k - $157.97k
...Geotechnical Engineer (481) Requisition ID 481 - Posted - TS-EN Geotechnical Eng - 410A - Carlsbad, NM, US - WIPP Site - Engineering... ...Requirements Bachelor’s degree in Mining, Geotechnical or Mechanical Engineering is desired. Experience with the design,...Temporary workFor contractorsLocal areaVisa sponsorshipRelocation packageFlexible hours- ...control philosophies, advanced abilities troubleshooting PLC logic control systems. Possess entry level integrator skills and uses engineering design documents to commission control systems, validate control loops, confirm functionality of control logic, configure end...Work experience placementLocal areaShift workNight shift
- Who we Are: Yesway, Inc. (“Yesway” or the “Company") (Nasdaq: YSWY), is an award-winning convenience store operator established in 2015 and headquartered in Fort Worth, Texas. With 450 stores across nine states in the Midwest and Southwest, Yesway is renowned for ...Temporary workWork at officeFlexible hours
- ...Job Title Duties Some of the major duties you will perform include but are not limited to the following: # AC Equipment Mechanic- The incumbent provides support in the areas of operation, maintenance, troubleshooting and repair of the large and complex...Temporary work
- ...Job Description Job Description The Mechanical Technician will perform mechanical functions and duties of inspecting, checking, troubleshooting... ...actuators, etc. Maintenance and repair of reciprocating engines and associated components. Assist with replacement of pumps...For contractorsLocal areaRelocation package
- ...and Responsibilities Troubleshoot, maintain, and repair commercial and industrial HVAC and refrigeration systems. Diagnose mechanical, electrical, airflow, temperature-control, and refrigeration-related equipment problems. Perform preventive maintenance and routine...Daily paid
- ...control philosophies, advanced abilities troubleshooting PLC logic control systems. Possess entry level integrator skills and uses engineering design documents to commission control systems, validate control loops, confirm functionality of control logic, configure end...For contractorsWork experience placementLocal areaWorldwideShift workNight shift
- ...Job Description Job Description Electrical Engineer – Mining Operations Location: Carlsbad, NM Department: Engineering & Reliability Reports To: Engineering Manager / Mine Manager Employment Type: Full-Time Position Summary The Electrical Engineer...Full timeFor contractorsWork at office
- ...Job Description Job Description Senior Industrial Maintenance Technician Mechanical • Electrical • Fabrication • Heavy Equipment Location: New Mexico Salt – Loving/Carlsbad, New Mexico Department: Maintenance Reports To: Maintenance Manager / Plant...Full timeApprenticeship
$70.97k - $123.57k
Industrial Hygiene Technician (459) Requisition ID 459 - Posted - ES-IH Industrial Hygiene Prgrm - Carlsbad, NM, US - WIPP Site - Operations ? Overview Be part of the nation's only repository for the disposal of nuclear waste known as Transuranic (TRU) waste...Temporary workFor contractorsWork at officeLocal areaVisa sponsorshipRelocation packageFlexible hoursShift work$36 - $38 per hour
...Lead Mechanic Carlsbad, NM, USA, 88220 Employment Status: Full-time Posting Start Date: 7/22/26 If you are currently an employee of Herc Rentals, please apply using this link: Herc Employee Career Portal ( Founded in 1965, Herc Rentals is one of the leading...Hourly payFull time$29.75 - $35 per hour
...wide variety of pumps, valves, pneumatic controls, electrical, mechanical, and hydraulic devices Assist with installation and modification... ...power transmissions, painting, plumbing, carpentry or engine repair Possess and maintain a valid driver’s license (commercial...Minimum wageWork at officeLocal areaImmediate startFlexible hoursShift work- ...candidate for this position is responsible for overseeing contractors performing maintenance, facility upgrades, installation of mechanical piping and equipment. Other responsibilities include ensuring our equipment is installed up to company standards and is working correctly...For contractorsWork at officeWeekend work
- ...: The main functions of the Pipeline Engineer include evaluating and commenting on discipline engineering work performed both internally... ...execute hydraulic analyses, perform onshore/offshore pipeline mechanical design including support for material selection, cost...Full timeFor contractorsFor subcontractorWork at officeWorldwideMonday to Friday
- ...Technician will perform and lead complex industrial leak repair projects at customer facilities. This includes installing mechanical enclosures and engineered repair devices, composite wrapping, valve repacking, and other online leak repair techniques. Experience with field...RelocationRelocation packageMonday to FridayShift workNight shiftAfternoon shiftEarly shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Mechanical Engineer IV. Be the first to apply!




